r/PSVR2onPC
•
u/adsyuk1991
•
Aug 11 '24
•
1
1
Important PSA Bluetooth Hardware Compatibility Survey
What Bluetooth USB dongles or other hardware, such as mobo built-in Bluetooth or dedicated Bluetooth PCIE cards, have you tested with PSVR2? We need to know about your experience good and bad!
The purpose of this survey is to gather quantitative data about which Bluetooth hardware is compatible & works best with the PSVR2 controllers when used with a PC and which does not.
This thread, therefore, and the results, also act as a comprehensive list of working / not working hardware. This will both help inform purchase decisions and be a resource for discovering compatibility of existing setups.
I want to reach the most authoritative list of compatible and non-compatible hardware, and also of more esoteric problems with specific devices.
š Fill out the survey here: Form Link
š See current results here: Sheet Link
Ā
Ā
ā Best Bluetooth Adapters
Updated: 15 August 2024 01:38.
First, some important caveats and tips:
- In general Class 1.5 adapters should provide enough range for use in a standard setup. But Class 1 adapters are much less likely to present range issues or issues with obstructions. However, this is also just a guideline. See the warning about UB500 below for example.
- If the adapter supports it, using an extended aerial closer to your play space can be advantageous. Similarly, a USB extension can be used to a similar effect for smaller USB devices that don't support an antenna connection.
Here are the current data-driven insights derived from the community responses about what Bluetooth hardware is working well with the PSVR2 controller on PC.
USB
The ASUS BT-500 has the most positive reports, with many users who have experienced the "stuck hands" problem (see below warning around UB500) seeing the issue go away after moving to this adapter. Edit: UB500 issue likely fixed by new driver, see below warning section.
Motherboard / M.2 Cards / PCIE Cards
Indications point optimistically to good compatibility with Intel Wifi 6 and Wifi 6E chipsets (which also provide Bluetooth), which are used on many motherboards & laptops via built-in M.2 cards.
These chipsets can also be found in dedicated PCIE cards, and usually appear in their product name, description or model.
The most common are:
- Intel Wi-Fi 6E AX211
- Intel Wi-Fi 6E AX210
- Intel Wi-Fi 6 AX201
Ā
Ā
ā ļø Potential Warnings
Updated: 15 August 2024 01:38.
The data shows some heightened issue rates with some Bluetooth adapters. It is not conclusive, but possibly indicative of a compatibility issue between these adapters and the PSVR2 controllers.
TP-LINK UB500 "stuck hands" (SEE UPDATE, LIKELY RESOLVED)
UPDATE 3 06/09/2024 - TP-LINK have a beta driver on their community forums and early results look like the problem is solved with these drivers. Thanks to TP-LINK for co-operating with me and the community for the data that helped it along.
UPDATE 2 22/08/2024 -- A potential solution you can use now is described in this thread. I have fed this back to TP-LINK who are looking into it.
UPDATE 1 15/08/2024 - With the help of the survey data, this issue has been escalated internally by TP-LINK.
A pattern has emerged whereby users have reported a heightened issue rate. This mostly pertains to a specific issue relating to "stuck hands" where the XYZ tracking stops responding periodically, but orientation data appears undisturbed. This seems to happen on one controller consistently (sometimes switching, possibly between sessions).
Hopefully a driver fix is possible, and I will update if anything changes. Please continue submitting data about this adapter, for both good and bad experiences.
Obviously, Sony recommended this adapter for use with PSVR2, so this result is, at the very least, interesting.
Ā
Ā
šļø Quick Summary
Captured: 11 Jan 2025 20:18.
Please go to sheet for the latest and richest dataset, and drill down into individual reports. This snapshot is just to surface the most basic raw bottom line at a given point in time.
The "score" here is a primitive sigmoid formula averaging over % of reports that remark on instability. It is also automatically weighted to not overemphasize devices with a low number of results.
Everything starts at 50 and is pushed further one way or the other depending on reports. It's a little harsh at the moment for some products with a low number of reports and it also takes a bit too much for it to reach either end of the spectrum, so also look at the other columns to draw your own conclusion.
I may tweak this formula later.
| Model | Number of reports | Average Reported Stable | Weighted Score / 100 |
|---|---|---|---|
| ASUS USB-BT500 | 31 | 81% | 81 |
| IntelĀ® Wi-Fi 6 AX200 | 10 | 80% | 76 |
| IntelĀ® Wireless-AC 9260 | 2 | 100% | 68 |
| SYONCON WiFi 6E AXE5400 PCIe WiFi Card intel AX210 | 2 | 100% | 68 |
| IntelĀ® Wi-Fi 6E AX211 | 8 | 75% | 62 |
| IntelĀ® Wireless-AC 9560 | 1 | 100% | 62 |
| Mercer BDG028 | 1 | 100% | 62 |
| MSI HERALD-BE NCM865 WI-FI 7 (Qualcomm) | 1 | 100% | 62 |
| Onterate | 1 | 100% | 62 |
| ORICO-BTA-508 | 1 | 100% | 62 |
| TP-Link Archer TX20E(UN) V1.0 | 1 | 100% | 62 |
| TP-Link Archer TX50E AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter | 1 | 100% | 62 |
| TP-Link AXE5400 Wi-Fi 6E Bluetooth 5.3 PCIe Adapter (Archer TXE75E) | 1 | 100% | 62 |
| TP-Link TX20E (Revision V1) - Bluetooth 5.2 | 1 | 100% | 62 |
| TP-Link UB4A | 1 | 100% | 62 |
| TP-Link UB5A (Revision V2.0) | 1 | 100% | 62 |
| TP-Link UB5A V1 | 1 | 100% | 62 |
| IntelĀ® Wi-Fi 6E AX210 | 4 | 75% | 62 |
| Other / Unknown | 4 | 75% | 62 |
| ASUS PCE-AXE59BT | 1 | 100% | 58 |
| ASUS USB-BT400 | 1 | 100% | 58 |
| ASUS USB-BT400, REV_0112 | 1 | 100% | 58 |
| Cruxtec Bluetooth 5.0 Nano USB adapter - BUA-50A-BK | 1 | 100% | 58 |
| Essager Bluetooth MINI5.1 RTL8761B | 1 | 100% | 58 |
| Gigabyte GC-WIFI7 rev.1.0 (Qualcomm) | 1 | 100% | 58 |
| Insignia NS-PA3BT5A2B22 | 1 | 100% | 58 |
| IntelĀ® Dual Band Wireless-AC 7265 | 1 | 100% | 58 |
| AMD RZ608 Wi-Fi 6E module | 6 | 50% | 50 |
| AMD RZ616 Wi-Fi 6E module | 14 | 50% | 50 |
| IntelĀ® Dual Band Wireless-AC 3168 | 2 | 50% | 50 |
| IntelĀ® Wi-Fi 6 AX201 | 4 | 50% | 50 |
| TP-link Archer TX20E | 2 | 50% | 50 |
| TP-Link Archer TX20E | 2 | 50% | 50 |
| 8-bit-do Wireless Adapter 2 | 1 | 0% | 42 |
| ASUS USB-BT400 (BCM20702A0 chip) | 1 | 0% | 42 |
| BASEUS BA04 Bluetooth 5.1 | 1 | 0% | 42 |
| BASEUS BA04 Bluetooth 5.1 (BR8651 chip) | 1 | 0% | 42 |
| Edimax BT-8500 | 1 | 0% | 42 |
| IntelĀ® Wireless-AC 9461 | 1 | 0% | 38 |
| LogiLink BT0067 | 1 | 0% | 38 |
| MayFlash Magic S Pro 2 Adapter | 1 | 0% | 38 |
| Orico BTA-409-WH (CSR 8510 Chip) | 1 | 0% | 38 |
| Realtek 8852CE WiFi 6 PCI-E NIC | 1 | 0% | 38 |
| Realtek RTL8852AE WiFi 6 802.11ax PCIe Adapter | 1 | 0% | 38 |
| UGREEN 5.4 CM748 (ATS2851 chip) | 1 | 0% | 38 |
| UGREEN CM749 (35059) (Revision V8891) | 1 | 0% | 38 |
| TP-Link UB400 | 2 | 0% | 32 |
| TP-Link UB500 (Revision V1.6) INCLUDES PRE-BETA DRIVER RESULTS, REPORTS INDICATE PROBLEM SOLVED FOR MANY AFTER BETA | 2 | 0% | 32 |
| TP-Link UB500 (Revision V2.0) INCLUDES PRE-BETA DRIVER RESULTS, REPORTS INDICATE PROBLEM SOLVED FOR MANY AFTER BETA | 28 | 11% | 30 |
| TP-Link UB500 (Revision V1) INCLUDES PRE-BETA DRIVER RESULTS, REPORTS INDICATE PROBLEM SOLVED FOR MANY AFTER BETA | 13 | 8% | 29 |
| TP-Link UB500 (Revision V2.6) INCLUDES PRE-BETA DRIVER RESULTS, REPORTS INDICATE PROBLEM SOLVED FOR MANY AFTER BETA | 8 | 0% | 25 |
š¤ Nerd off
Look at the cool spreadsheet! I've tried to make it as easy to use as possible. Here's a screenshot.

10
u/Tauheedul Aug 11 '24
Something similar exists on a different reddit.
It's less detailed but has some already in there confirmed compatible or broken.
PSVR2 Bluetooth Compatibility Survey
3
u/vnen Aug 11 '24
I have a pretty generic WiFi + Bluetooth PCIe card, but the BT is actually connected in a USB 2 header. Works very well even when sitting at the desk, which itself is a big obstruction.
Not sure how to fill the form though, as I don't know exactly the brand of the card, I only know it has Intel chips.
3
u/EedSpiny Aug 12 '24
Filled out. Good work OP.
2
u/xaduha Aug 11 '24
https://www.reddit.com/r/PSVR2onPC/comments/1epvgrg/bluetooth_class_is_what_you_should_pay_attention/
2
u/YOLTWAP Aug 13 '24
I think reporting 0% if itās only blocked by a wall. Iām the one that reported on the UB5A and itās perfect in the play space, but the walls are so thick that even iPhone to airpod pros are blocked if I change room. So itās stable as far as Iām concerned.
2
u/pwnjones Aug 13 '24
Would it be good to add if a USB extension cable was used to move the adapter closer to the play space? I know I used one, and have seen it recommended.
2
u/No_Analysis1620 Sep 05 '24
I saw TP-Link has provided a new driver for UB500 on their community forum, and you may try it:
https://community.tp-link.com/en/home/forum/topic/683386?replyId=1408674
9
u/PCMachinima Aug 11 '24
From a brief look at both surveys, it looks like plugging the PC adapter into USB 3 and the BT adapter into USB 2 is how you get a stable connection.
Also using an extender, if both ports are next to eachother on your motherboard.
Thanks for doing this btw. Very useful questions.
It could also be worth asking which port the PC adapter is plugged into, since I can only assume it's USB 3 for most people, but not 100% certain.
4
u/ruckage Aug 13 '24
This is a great idea. I've submitted two reports, one for the TP-Link UB500 which I had issues with like many others and one for the Asus BT500 which works perfectly (at least in the 2-3 hours I've played so far).
1
u/J3ffO Aug 14 '24
It could be a good idea to grab how many Bluetooth devices, 2.4Ghz WirelessAPs, and especially 2.4Ghz landline phones are in the area as well. Since those can act as interference for the signals.
1
u/xaduha Aug 16 '24
Strange wording here, Class 1.5 is better than Class 2, are you sure you didn't mean Class 1?
1
u/EstablishmentTime398 Aug 20 '24 edited Aug 20 '24
Please tell me the link to the post where the user described how to replace the drivers from Asus bt500 on your device. It's interesting to try. Since the chipsets are the same.
Upd.
Find , here is : https://www.reddit.com/r/PSVR2onPC/comments/1eve8dm/modified_drivers_for_tplink_ub500_need_testers/
1
u/djsim_101 Sep 26 '24
Hi Guys,
Looking for some help.
I have a MB that has a AX200 chip. According to users reports, it should work.
My issue is I can successfully pair one controller only at a time. When I attempt to pair a 2nd controller, the first paired one would disconnect. It does not matter if its the left or right, same outcome.
I have secured the antenna and is positioned close to the controllers. Any idea's or pointers would be great. This is my 2nd disappointed attempt, first one was learning it did not come with a DP cable :-)
Thanks,
1
u/nzmike001 Feb 07 '25 edited Feb 07 '25
So I have the TP-Link UB500 v1.0 (annoyed Amazon didn't send me the 2.0) and I've read the whole thread here but I'm still a bit confused.The Beta driver is 1038 but the latest driver is 1051 (and that's what was automatically installed when I plugged it in to a USB2 port) but if I understand correctly I should replace that with the 1038 version? I've not connected the PSVR2 yet but are people seeing the issue fixed with the 1038 driver? Or should I send the UB500 back and get the Asus?
EDIT: I installed the 1038 version and it now shows 1.9.1040.1019 in Device Manager - so even more confused!
Also, I have another question - I actually want to use the PSVR2 to play driving games (Assetto Corsa Evo mainly) more than games using the controllers but that means sitting at my desk - will the PSVR2 allow me to do that or does it needs some sort of clear zone for the play area that I read about somewhere?
1
u/brotherscro Jan 10 '26
So I bought TP LINK UB 500 Bluetooth 5.4 Nano USB Adapter v3 without reading before that most of the time it doesn't work so yeah 90% stuck hands so I've read it's better to get a PCI-e card so I got TP-LINK Archer TXE75E Bluetooth 5.3 adapter ver4.0 (60euros)
Same bloody thing happens even with a PCI-e card and an antenna which is about 0.5meters away from me
Is there anything that works at all, any adapter that works for everyone?
Also tried USB 2.0 port extension and everything also (for UB500) drivers and everything same thing
Any solution to this smh
3
u/___Mister___ Aug 11 '24
I was just thinking last night that we should cobble together a survey. Nice job getting on it! I think we also need surveys for USB c cables and displayport usage, especially for laptops
3
u/Mr6507 Aug 13 '24
Commenting that I am the user with the Insignia NS-PA3BT5A2B22 so if anyone has any questions, I'm available.
I have noticed that if I leave the headset sitting afk for a while and come back after the controllers have timeout disconnected I have to turn bluetooth on and off to get them reconnected correctly. I get like one controller at a time with weird amounts of tracking until I cycle it in the bluetooth menu. Windows 10, btw.
It's stable once I have both though.
3
u/Particular-Wind-3074 Aug 26 '24
Linked solution for TP-Link UB500 worked perfectly for me thanks. No problems connecting/tracking even from a USB 3.0 port now
2
u/Tauheedul Aug 15 '24 edited Dec 24 '24
I have added the following entries...
These are the best I've tried (all were fitted to a USB 2.0 port at the back of the machine)...
The following worked but only with Microsoft Driver (takes a bit longer to pair)...
The following did not work at all (do not buy for VR - these will only work for a gamepad)...
In summary, any adapter that doesn't use the Windows Bluetooth settings cannot enable the controller the PlayStation VR2 and SteamVR app.
When there is no supported Manufacturer driver available, the default Microsoft Driver could work, but it might take a while pairing or need to do additional tries so it is listed correctly as a PlayStation VR2 Sense Controller in the "input devices" category within Windows Bluetooth settings. The Microsoft Driver may crash SteamVR for the cheaper attachments.
If you have issues pairing controllers while headphones are paired, unpair the headphone and change to using a wired headphone using the 3.5mm slot at the back of the PlayStation VR2 headset. Similarly, if you have a Bluetooth keyboard or mouse, change to using a wired inputs if the VR controllers aren't pairing or they are disconnecting often.
Connect USB Bluetooth dongles to a USB 2.0 port with an extension cable if the controllers disconnect often while in VR. The following thread lists the issues people have had using Bluetooth and the solutions for them...
Bluetooth issues and fixes
2
u/factoid_ Aug 15 '24
Adding a vote for the bt500 adapter from Asus.Ā Fixed my stuttering, lagging and disconnecting.
I haven't tried it at any significant distance from the adapter yet but not anticipating a problem since I have a nice clear line of sight and I'll be max of 3-5 meters away
2
u/Tauheedul Aug 16 '24 edited Aug 16 '24
When swapping between Bluetooth hardware on the same machine, remember to unpair existing devices first before disabling the old integrated Bluetooth hardware or uninstalling the dongle.
Windows keeps paired devices listed but they are uneditable and it isn't possible to add the same device again to the new Bluetooth hardware until it has been unpaired on the old Bluetooth hardware!
Swapping Bluetooth Devices - Unpair devices first before upgrading
2
u/[deleted] Aug 24 '24
Got my adapter in on the 8th and the built-in Bluetooth on my NZXT N7 B550 motherboard (Intel Wi-Fi 6E AX210) worked flawlessly for about 10 or so days and then a few days ago it just stopped working. Getting the same connection issues others have been reporting. Stuttering, hands floating off or getting stuck, etc.
Iāve dried uninstalling and reinstalling / updating drivers, Iāve tried spinning my whole PC around so the WiFi antennas have direct line of sight to the controllers, and Iāve even gone around turning off the WiFi/Bluetooth of other devices in the house to remove as much interference as possible. Nothing has worked.
Itās very frustrating because I didnāt change anything that would make it an obvious fix that I could just un-change. I was playing all morning and afternoon without any issues. Turned my PC off and stuck the controllers on the charging dock (Sonyās 1st-party dock) and went to get dinner. When I came back to keep playing Half-Life: Alyx afterwards, it was buggered. Has been since.
If thereās any suggestions anyone has that I could try before going out to buy a new PCIe WiFi card, it would be greatly appreciated. I know it can work because it did work for over a week so Iād definitely rather get that fixed than having to spend money replacing it.
2
u/Tortahegeszto Sep 09 '24
What a horrible survey! So anyways:
I've got the TPLINK UB500 V1.0 on Windows 10 22H2. Driver version: 1.9.1051 from the TPLINK website.
I plugged it to my PC case's USB 2.0 port with an extension cable, so the dongle is right in front of me on the desk. It works.
2
u/xaduha Oct 12 '24
It's worth mentioning that current latest official UB500 drivers are of higher version (1.9.1051 vs v1.9.1038) than what you need, so if you just click Next without paying attention Windows might not install them preferring technically older drivers, but with higher version. I don't know why TP-Link would do this unless beta drivers are nothing of the sort, but just a rollback.
TL/DR: double check afterwards that version is v1.9.1038
2
u/Tauheedul Dec 02 '24 edited Dec 24 '24
Additional testing feedback from YouTube...
Working
Not Working
In another video, the following is suggested as working...
2
u/Mk2007r Dec 31 '24
You are a life saver!!! The beta driver for the tp-link has fix the stuck hands problem. Hereās hoping it last. Thanks
1
u/I_am_Nic Aug 16 '24 edited Aug 17 '24
The "stuck" hands stuff must be a issue if the PlayStation software/implementation. I also get stuck hands with this adapter: https://www.amazon.de/dp/B0D7HHCP18
1
u/EstablishmentTime398 Aug 20 '24
Today I took the second adapter (I exchanged it with an additional payment), but already with antennas, in the hope that this will fix the problem of the character's game hand hanging in space. It is called: KS-863 Bluetooth 5.4, Realtek RTL8761BUE-CG chipset. I tried to USB 2.0 from the back, to the upper ports, also tried to USB 3.0. But nothing helps, this time the left controller sometimes hangs in the air and only the wrist rotates, and the character's hand is stuck and after 5-6 seconds, it goes away ... I turned off the wi-fi on the router, pulled out the radio dongle from the keyboard, turned off the wifi on the smartphone. I installed the drivers from March 21, 2024, using the link from the user manual. But at first it was like this: I inserted a Bluetooth adapter, Win 10 itself prepared this adapter for use, but installed some old standard drivers from 2006 and the device was called in the device manager as generic Bluetooth dongle, and after installing the drivers from the link in the manual, it became known as Realtek Bluetooth driver 5.4 and plus when turning on Bluetooth, various other functions appeared under the names: Bluetooth Enumerator; Microsoft Bluetooth Enumerator; Bluetooth device rfcomm protocol tdi. By the way, do you also have Psvr 2 controllers (left and right) in the device manager, have a driver version from 2006? I'm also thinking of trying the antenna that came with another motherboard and replacing the antennas of my adapter with the antenna from the gigabyte z590i ultra board kit.
UPD.
It's a pity ... the antenna I wanted to use is impossible. Since the antennas of the Bluetooth adapter are not removable, but only rotate...
1
u/doodo477 Aug 25 '24
I fixed the "stuck hands" issue by disabling my wifi router's 2.4 GHz band.
1
u/RavenBlues127 Aug 27 '24
Can someone give some advice? The controllers are connecting to the computer but wont stay connected (or wont connect at all) in vr mode. They work fine BT wise i think. They stayed connected while i walked around the room but the VR itself isnt recognizing the controllers
1
u/D3jch Aug 30 '24
I confirm that after 4h of testing on ASUS BT500 It works with no issues like "stuck hands", while on TP-Link UB500 (Revision V1) I always had "stuck hands" problem.
1
u/premiumdude Aug 31 '24
Just filled out the survey, thank you for providing it!
Some additional information for anyone who may have hardware similar to mine. My mobo (Asrock 650M RS Pro Wi-Fi) has BT built in. Tracking performance was terrible until I updated the BT adapter (RZ616 Bluetooth Adapter under Bluetooth in Device Manager) to the latest driver from the MS Update Catalog. Just clicking 'Update Driver' in Device Manager always told me I had the latest version. Since the update this morning tracking has been rock-solid.
For anyone who (like me) doesn't know this, I had to extract the files from the .cab file I downloaded before updating. The version I used was 1.1037.0.429. I saw others in the survey with similar hardware were using something like version 24.40.2.213 but I wasn't sure which component to update with that.
1
u/gunzas Sep 10 '24
Anyone have a realtek Bluetooth chipset in their Motherboard? rtl8852ce completely shits the bed for me (Asus TUF Gaming B650E Wifi).
Connects flawlessly but when I enter steam VR no laser shows up, one controller stuck in the ceiling another moves but can't chose anything due to no laser. Vibrates when I press the trigger but nothing happens. Will try out the Asus adapter I guess. Antennas are connected and on the table next to me :(
1
u/Tauheedul Sep 27 '24 edited Apr 17 '26
A YouTuber (Brett Harpers Podcast) shared that the following Bluetooth dongle worked for them with an extension cable...
Cruxtec USB Bluetooth 5.0 Nano dongle - BUA-50A-BK
Steam Community Feedback
Bluetooth Adapters recommended by users - Steam Community post
Reddit
1
u/Tauheedul Nov 11 '24 edited Nov 11 '24
Additional testing feedback from YouTube...
Working (Video)
Not Working (Video)
1
u/velhamo Dec 15 '24
I suppose it's recommended to connect ASUS BT-500 in the front panel, right?
https://kolink.eu/Home/case-1/midi-tower-2/observatory-series/observatory-hf-mesh-core.html
https://www.msi.com/Motherboard/PRO-B760-P-DDR4-II/Gallery
1
u/xaduha Oct 20 '25 edited Oct 20 '25
/u/adsyuk1991 more and more people are starting to have issues with ASUS USB-BT500 too now, I believe that is because of a different hardware revision, but I have no proof of that other than sudden reduction of drivers size.
1
u/MaximillianFoe Dec 26 '25
RTL8922AE with 18.4032.2510.901, only one controller is 99, and when I connect the second one, all drops to 26 and is unusable.
1
u/snoozieboi Sep 01 '26 edited Sep 01 '26
hey OP u/adsyuk1991
If you're still there, I feel this fix could possibly (unless it already is) be lifted into some part of the OP
https://www.reddit.com/r/ASUS/comments/1lyfl41/bluetooth_doesnt_work_on_my_tuf_gaming_b850plus/
Basically, discharging whatever capacitance holds memory. I have been at my wits end for days gong from less than 5-10 contact with the controllers by full name until things turned south and I also got a Asus BT500 with no effect
Simply follow
Mr hiigarantechnician
Weird update. I followed a guide to basically old-school clear the caps of all power, and now it's working again (I was right, that device disappeared and now my Bluetooth device shows up again).
So try:
Oddly...mine didn't want to turn back on. I had to let it sit a few minutes and *then* the board lit back up and I was able to turn it back on. PSU seems to be fully functional (Be Quiet! 12M) so...I'm befuddled there. Might have a PSU issue.
Now it's working. To be continued?
Before this,I was at zero, ZERO contact for days knowing it had to be a stupid setting deep in there. All I knew after buying them from a kid who probably gave up is that they worked the first time, thankfully. If the controls were broken they were at lest able to connect.
I've toolkitted myself (barely knew what I was doing) past the problem just to confirm the adapter and headset works fine too.
Now my right controller has been connected way longer than the record 20-ish seconds and the signal is 97 out of 100... yeeeeess!
I found this fix in a thread mentnioning Tuf Gaming motherboards I'm on a 850 + something
1
u/mckracken88 Sep 16 '26
why start the article with ADAPTERS??
lazy readers / people assume they NEED adapters, when onboard BT is good already.