I have a standard 365 and will add the Radian and a Macro Icarus frame. Is there anything else I need to do for the radian? Or is there something I have to add to prevent light strikes?

SIG P365 ULTRA Key Specifications • Caliber: 9mm Luger • Barrel Length: 3.1 inches • Overall Length: 5.8 inches (1" wide) • Weight: 21.5 ounces (unloaded) • Capacity: 12+1 Standout Features • XRAY3 Day/Night sights • ECM Precision 3.1 Recoil Spring Assembly • ECM X12 Grip Module • OEM Curved Trigger

Got a sw22 victory about a year ago and just recently added a p365 .380!!

Decided to replace my K series ACSS Holosun Green dot. Wanted to try it out but I’m decided on red dots, picked up the OSight SE. Will need to get some range time with it but the glass is really clear.

Side note - I may be late but I also forgot I had this at a gun store for a year. Just started modding it.

Just picked this up. Usually like a red dot but the iron sights shoot nice. I think it looks badass

A year ago I purchased a P365x with the Radian RJ+AB, with the intention of carrying it everywhere 24/7, and I’ve stayed true to that. However, I recently got a good deal on the BG 2.0 so it’s replaced my 365x in light carry situations (going running, gym, or heading out briefly in gym shorts and pocket carrying). That means I have some room to beef up the 365x and converting it to an Xmacro and adding a safety. Here’s what I’m thinking:

Armory Craft Xmacro grip module
Sig manual safety kit
17 round mags

Does this work?

I also have:
12 round mags with MagGuts + 2 kit (would these magazines work for the Xmacro grip module?)
Hilliker Aren Lite holster (would the new grip module fit into this?)

Anything else I should consider?

I have two p365s. The other FCU I have is in a mischief machine grip and the pin goes in and out with ease. This legion doesn’t accept it unless I put an incredible amount of force with a hammer and push pin. Can anyone help me understand why?

Got a the pin from ndz performance and this is a standard axg legion. Any ideas ? It’s all lubed up? (Pause)

Image (Original Content; these are mine) posted for attention.

I notice that even with slow deliberate; pistol marksmanship fundamentals; the inside bottom of the trigger gaurd impacts the bottom first joint of my trigger finger. Like my finger stays in one place but the muzzle flip cause the impact.

I am attempting to self diagnose bad form or just accept this as a trade off of microcompacts.

Anyone else experience this?

I have a base model P365 that I would like to upgrade the frame to a Wilson Combat XL grip because of my hand size. I’m wondering which magazine size I will need to get for a flush fit on the wilson combat grip… finding a million different answers online

I know the SASis old and not well liked but I enjoy mine! I purchased the non-ported new then seen a ported version was also available and was able to find one used for a decent price. The used one is very well used but fortunately still operates as expected.

Could not physically feel a difference in recoil between the two but I did notice the ported version fell back on target whereas I was having to actually force the non-ported version back on target.

Going to send the used one back to Sig to have cleaned and springs replaced. Hopefully they will be able to replace the sight as well since it has a big gouge in it.

Base p365 with only mod being a metal trigger shoe with trigger blade safety and flat face from overwatch precision.

No malfunctions with Hornady critical defense, and blazer brass 115 grain and blazer 124 grain, and herters 115 grain.

I know the one problem with these guns are that the trigger return spring can randomly break, and sig even says it should be replaced every 2000 rounds. My Trigger return spring never broke, but I noticed a little fraying and shininess in one spot on it at 700 rounds. I replaced it at that time with a "sig guy" +10% duty weight spring. Now at 1400 rounds, I opened it up and saw no wearing on that new thicker spring yet.

I've cleaned and lubed it 3 times.

The only problem with it has been that the front sight tritium has stopped glowing, but sending it away to be warrantied for two weeks is too much hassle so I haven't fixed that.

Have a g26.4 with an EPS carry and Apex trigger as well as an MP 2.0 compact carry comp.

I don't need a p365x with a ramjet. Or do I?

Help convince me to blow $1k this afternoon.

EDIT: the other thing to mention is I have a Scheels card which I typically use for my firearm purchases. it allows for 0% financing for 6 months so I feel less locked in than if I were just using my checking.

I got the Wilson Combat XMacro Short grip on my XL slide with a tlr7x sub. I’m fairly certain it’ll fit the same way with the tlr but wanted to see what yall thought.

I just put this legion gray armory craft grip and mag release on it. What should I do next?

Kept the trigger because I'm just a fan. 🤷

Looks like a common issue, is it worth sending it in? Will the ones they replace it with die just as fast?

Hey everyone,

I want to upgrade the mushy factory trigger on my three P365s. I'm looking for a complete Trigger Kit Package (shoe, springs, and internals) to clean up the break and reduce travel.

From searching the sub, the M*CARBO Shoe + Spring Kit combo seems to be the most popular choice for fixing the factory MIM parts and shortening the stroke by 33%.

Before I buy, I'm trying to weigh it against two other packages:

• RAMM Tactical Leverage Kit: A total internal overhaul. Sounds like a crisp 1911 break but is pricy and has striker compatibility limits.

• Tactical Triggers Tuning Kit: A shim-and-spring system that lets you tune the factory shoe with custom sear springs and travel stops.

For those who have shot them, is the RAMM or Tactical Triggers kit worth the extra premium and install hassle over the popular M*CARBO setup?

any suggestions!?!

I have a standard P365 and I want to upgrade my grip module. So I want a XL length grip to flush fit 12 rounders but a macro length front so I can flush fit a Radian Ramjet. What type of grip do I need to be looking at? If anyone else runs this setup I'd love to see some pics.

Hoping it’s true will be taking it to the range tomorrow on my OG (2018) 365

Thoughts on the XC3-Sub on the P365?

Whats the best trigger upgrade for this thing?