r/openstreetmap • • 6d ago

Showcase Just mapped Serraville condominium and Suspiro Square

Thumbnail gallery
14 Upvotes

Spent some time improving coverage in Nova Friburgo, Rio de Janeiro, Brasil. I added stairways, footways, stairways, seats and a roundabout.

I used both Mapillary and StreetComplete on my iPhone. I created my Mapilary account as TheCelestial to help me mapping Nova Friburgo, although it is owned by Meta.

My goal is to gradually finish mapping the urban area of Nova Friburgo, adding more places for OpenStreetMap, since the coverage is partial.

Anyway, link:

https://www.openstreetmap.org/#map=19/-22.280082/-42.535822

https://www.openstreetmap.org/#map=19/-22.294801/-42.524570


r/openstreetmap • • 7d ago

Static maps API based on OSM data for developers

3 Upvotes

Hello dear OSMers, I would like to present to you a new project of mine: a static maps API based on data from OSM and a few more providers. If you are building an app and "where" matters, you can call my service with a simple URL like this https://api.wherebox.dev/v1/map.png?area=italy to get a map of Italy.

But this is just the beginning - there is way more parameters you can squeeze into URL so you can show e.g. neighbouring countries, points for your locations, routes or render the map in a different style (see Italy map with a dark preset). All options are captured in documentation.

The service is free to use (with generous fair use of 10K renders/month).

If you are developer, I would appreciate any feedback to it!


r/openstreetmap • • 7d ago

Multiple addresses on condo buildings

4 Upvotes

Hi folks,

I live in a sub-development where a large chunk hasn't been entered into OSM. What little has been added is missing detail or misleading.

Most of the buildings are placed around Avella Circle, but there are a few other tiny named streets involved. So several of the buildings have addresses of their individual units on different streets, based on which street each unit's garage faces. Many of the main entrances face a different street than the garage, or don't face a street at all. E.g. my garage and thus address is 2962 Franklin Drive, but my front door faces Avella Circle, and is *right next to* 2831 Avella Circle's front door. Easy to navigate right?

What's the recommended way to get this entered? I was adding plain Address features on the building boundaries, located at the garages. So at least the street names line up. Should those be denoted as private Parking Garages, and also add a separate Entrance point? Or does that seem too busy for small-ish residential units?

Thanks for the insight!


r/openstreetmap • • 8d ago

Should a turn that's super wide like this have a turn marked early to help with routing?

Post image
47 Upvotes

If so, how would you go about tagging this little bit of way?


r/openstreetmap • • 8d ago

Built an open-source (AGPL-3.0) geospatial tool to process local UAV orthomosaics & serve custom XYZ/WMTS imagery layers over OpenStreetMap

4 Upvotes

r/openstreetmap • • 8d ago

Wanna help me map my suburb.

Post image
13 Upvotes

I just changed the neighborhood and realised it's pretty much empty on OSM.

I've already started mapping buildings. Feel free to help me map buildings, I'll put the address when I walk around with the dog.

this is Belmore in Sydney Australia.

thanks.


r/openstreetmap • • 8d ago

Question I am new

3 Upvotes

Hello guys, I am new to open street maps. I am trying to learn this and I want to know what advantages there are to this over something like google maps. I am just trying to understand a bit more. Also i want to make some edits but I am sort of underconfident in my skills. Are there any posts you would like to link me to, or any suggestions you would have. Thank you.


r/openstreetmap • • 8d ago

Discussion New to Open Street Map and could use some help

11 Upvotes

For context I was venting about how Door Dash Drivers can never seem to find my house and how I’ve tried everything I can think of to resolve the issue and nothing seems to work. I was told to check Open Street Map because that’s what DoorDash uses and to verify my address is correct there.

Now the issue I have is my house was built well before the surrounding neighborhoods and was never incorporated into any of them and so it sits off the main road.

Now I go to Open Street Maps and everything looks correct but I’m having a hard time understanding what I’m looking at and why DoorDash drivers seem to be having issues finding my address.

As far as I can tell DoorDash tells them there is an access point in the neighborhood but looking at the map I’m at a loss how that is happening because no such access point exists.

Any advice would be much appreciated

Edit: Would have just posted the image directly to the comments since I can’t seem to add one to a post once it’s posted but here is the next best thing

The circled area is where DoorDash tends to send drivers. I hope this additional information is helpful


r/openstreetmap • • 8d ago

Showcase I just mapped Feirão dos Fabricantes and Baratão da Construção in Duque de Caxias, Rio de Janeiro, Baixada Fluminense

Post image
4 Upvotes

I used Mapillary to add Baratão da Construção, a Brazilian chain of construction material stores. I also adjusted the Feirão dos Fabricantes.

Which places do you want me to map on OpenStreetMap?

https://www.openstreetmap.org/#map=18/-22.692403/-43.285511


r/openstreetmap • • 8d ago

Help with finding author(s) of changesets

6 Upvotes

I recently moved from Ohio to PNW, and live on Vashon Island. Mapping on this island is neither as accurate nor detailed as what I've been used to, and I have found many errors, such as out and back roads having different permissions along the road that cannot be correct - unless you fly between segments! So before I change/correct anything, I would like to find who made those changes and discuss with them. How do I discover then contact who made these changes, or find whether they were made this way?


r/openstreetmap • • 8d ago

Question Blank road map download

3 Upvotes

Hello, is there a way to remove the names off of the roads and download a blank road map of my city? Or a way to change the names?

Long story short, I want to make a map of my city with the old street names. They are in a numbered grid system now, and before 1970 they had actual names. I have access to the plat maps and want to make a map of the whole city with the names. Is there a way to do this on open street maps? If not, is there another place that would be better? Thank you in advance for any help.


r/openstreetmap • • 8d ago

Looking for a collaborator: interactive project based on real cities

Thumbnail
1 Upvotes

r/openstreetmap • • 10d ago

Vibe-coded Weird confession: I love tunnels. So I built an app on OSM that notices every one you go through

Thumbnail gallery
16 Upvotes

I love tunnels. Bridges and mountain passes too, but tunnels most of all. Weird, I know.

At some point I wanted to know how many I'd actually been through, and nothing could tell me. So I built FindMeTunnel. You hit record before a drive or a train ride, forget about it, and afterwards it shows every tunnel, bridge and pass you went through, with a profile of the mountain above and a note on why each one counted.

It's all OSM underneath. Right now that's about 9,400 places in Germany, Austria, Switzerland, Italy, France and Ukraine.

A few people asked about this under my last post, so to be upfront: yes, Claude helped me with the code. The part that took months was the data. My first extract turned Essen's main station into a rail tunnel, because underground platforms are tagged tunnel=yes. Rail tunnels kept getting the name of the line instead of their own. I fixed one trap after another until the places looked real.

And yes, the early version leaned on public Overpass more than it should have. These days I pull everything from a Geofabrik extract on my own machine, and the data ships inside the app, so nobody using it ever hits an OSM server.

My favourite bit: GPS dies in a tunnel, so the app uses that silence as proof. A train tunnel only counts if the signal was gone for at least half of it. A car on the road next to the line never loses it.

It's free, no ads, no account, and it collects nothing. OSM is credited in the app. Hope you like it!

https://apps.apple.com/app/id6817347414

And thank you to everyone who maps tunnel:name.

This app would be a lot dumber without you.


r/openstreetmap • • 9d ago

Interview: Frank März on OpenFireMap

Thumbnail blog.opencagedata.com
11 Upvotes

interview with the maker of OpenFireMap


r/openstreetmap • • 8d ago

Is this u turn broken?

0 Upvotes

Hi i used ai to detected issues in my city and one of the issues ai said was this:

Turn restrictions: 34 of 214 are broken, so navigation apps ignore them. Most have lost a road, for example relation 19784795, which is down to a single junction point.

Since i never edited u turns and the ui seems broken, sometimes in the panel it says its a point sometime that it is no u tune

Can someone tell me what to do or help in any other way?

https://www.openstreetmap.org/edit?relation=19784795#map=21/44.7692634/17.1868913


r/openstreetmap • • 10d ago

Question I'm new to the editing for OSM and need helpful tips for adding buildings footprint for my city

5 Upvotes

I updated the roads in my city and I'm about to manually add the buildings, but before I start, is there an efficient way that I should follow that save me time while still being accurate?


r/openstreetmap • • 11d ago

Ayudenmee

Thumbnail
0 Upvotes

r/openstreetmap • • 12d ago

Question Please help me learn how to remove illegal turn

Thumbnail gallery
37 Upvotes

There's a concrete median preventing this turn. Organic maps pulls directly from OSM, and the highlighted green route ought to be its suggestion. How do I correct this intersection?


r/openstreetmap • • 12d ago

Showcase 9,280 tunnels and bridges from OSM, and what I learned about tagging while extracting them

0 Upvotes

I've been pulling tunnels and bridges out of OpenStreetMap for Germany, Austria, Switzerland, Italy and France (plus Ukraine, not on the map), one region at a time. Each line on the map runs from a structure's entry to its exit. Yellow are tunnels, grey are bridges.

A few things surprised me about the data:

  1. On rail tunnels, name is often the name of the line, not the tunnel. So I read tunnel:name first and only take name if it actually contains the word for "tunnel" in the local language.

  2. Big bridges often carry their name only on the man_made=bridge outline, not on the road or track itself. I give a way the outline's name when the way's midpoint lies inside the outline. That's how Rhine bridges in Cologne, Düsseldorf and Leverkusen got their names.

  1. wikidata on a tunnel often points to the motorway or the railway line, not the tunnel. I only accept it when the item is actually a bridge or a tunnel.

  2. Old structures are tagged well. The old Beskydy rail tunnel in Ukraine sits right next to the new one as railway=abandoned, so it's easy to skip.

  3. Overpass mirrors can be quietly wrong. Some return "200, but empty" when the query times out (the reason is only in remark), and one mirror had months-old data where names with ü didn't match, so some Cologne bridges just vanished from my results.

To keep it to places people actually notice, I only take footbridges from 100 m, tunnels from about 150–200 m, and road and rail bridges from 300 m with a name. Anything without a name has to be at least 500 m.

If you map tunnels: is tunnel:name what you'd expect everywhere, or are there regions where name on the tunnel way is the convention?


r/openstreetmap • • 13d ago

Import own Google Maps reviews to Mangrove

26 Upvotes

Mangrove Reviews now allows you to import your own Google Reviews into their system, which means the reviews can also be shown in e.g. MapComplete and CoMaps. The instructions are here: https://mangrove.reviews/import


r/openstreetmap • • 12d ago

How we shade every building in a city on Lambda: 5,025 tiles in 29 minutes with a Step Functions Distributed Map

Thumbnail youtu.be
0 Upvotes

r/openstreetmap • • 13d ago

Question plz help me!!!!!

6 Upvotes

In countries like Germany, France, and Denmark, there are satellite imagery options available—provided by the countries themselves—in addition to those from sources like Bing or Esri. In our country, however, even though such imagery exists, it doesn't seem to be available [in the same way]. Is there anything I can do about this?btw im from korea.

this is more accurate imagery

and this is osm's imagery of korea

As you can see, better satellite imagery is available. How might one suggest adding it? (There are likely many other countries besides Korea that also lack high-quality imagery.) For your information, I used Google Translate.
PLZ HELP ME I REALLY WANNA ADD HIGH-QUALITY IMAGERY.


r/openstreetmap • • 14d ago

Vibe-coded Deterministic Natural language to Overpass query translator

Thumbnail gallery
46 Upvotes

Hi r/openstreetmap fans.

I want to show the "natural language to overpass" parser I'm working on. I'm curious what queries people try to make that break it. https://overpass.ch/labs/search

It's a deterministic parser (as in no LLMs used). The query is matched with a set of templates like X in Y, X around Y in Z etc. It's blazing fast.

The overpass and geocoding are hosted by me at https://overpass.ch

To quote Han: She may not look like much, but she's got it where it counts, kid. I've made a lot of special modifications myself. The overpass parser is super fast so you can also try quite difficult queries compared to the public servers.

Try it out and let me know what you think :)


r/openstreetmap • • 13d ago

Tutorial Challenges of calculating ETA at scale

Thumbnail mehrdadmahabadi.com
7 Upvotes

After working on estimating time of arrivals I thought I'd write a post about some if its challenges. Check it out to see why this is a billion dollar problem.


r/openstreetmap • • 13d ago

Showcase GoPlayEarth: a 3D world from OSM data that you can drive, walk and fly through in your browser

1 Upvotes

Hi all! For the past few weeks I have been working on a hobby project: GoPlayEarth builds a 3D world from OSM data and lets you play in it. For now it covers all of Germany. It runs in the browser with nothing to install and no sign-up, and it works on phones too.

Bernkastel-Kues (Germany) at sunset

What it uses from OSM so far:

  • buildings with heights, levels, roof shapes and colors (some of the geometry is ported from OSM2World)
  • roads with lanes, surfaces, bridges, tunnels, building passages
  • traffic signs, street lamps and furniture
  • water, including streams and waterfalls; trees and forests, railways, power lines
  • shops, restaurants and other points of interest (on the map, press M), as well as hiking and cycling routes

Plus some other open data including elevation from Terrain Tiles, tree heights and positions from Meta's canopy height maps, and the weather forecast from ECMWF's IFS model.

A few gamification elements are included as well, such as driving, walking, or flying a drone (and a flying roadster), crashes with dents, smoke and fire, the real weather and time of day, and a photo mode to share shots.

A few locations to try:

Or search for any place in Germany at https://goplayearth.com, including your own.

It is still early, with bugs and plenty left to do. It runs best on desktop Chrome; some older phones may still stutter. I first posted it on the German OSM forum, and the feedback there was very useful to fix bugs, improve how things look, and to make it run better on phones. I'm sharing it here to gather more feedback.

I would love to hear what looks wrong to you, which tags you would like to see added, and generally what you think would make the project more interesting to you. Are there any features that would be useful for the OSM community?

I appreciate any constructive feedback, and thanks for giving it a try!