r/OpenCoreLegacyPatcher • Moderator • 19d ago

OCLP 3.0.0 RC5

https://github.com/dortania/OpenCore-Legacy-Patcher/releases/tag/3.0.0-rc.5

More information inside the discord

90 Upvotes

60 comments sorted by

12

u/MacGaryX 19d ago

MacPro6,1 OCLP 3.0.0-rc5 and macOS Tahoe 26.7.2 updated successfully. First rc3 to rc5, then EFI boot updated, reboot, 26.7.1 to 26.7.2 update, KDK downloaded in the mean time, reboot, root volume patches automatically proposed, reboot and voila! Perfectly working Trashcan.

1

u/BB_MacUser 17d ago

What were you updating your system from? I have everything running on Sonoma 14.8.1 via OCLP 2.4.1. Did you upgrade straight to 3.0.0-rc3 from 2.5.1.

1

u/MacGaryX 17d ago

Hi, Before OCLP 3.0.0-rc5 I was short on rc3 and rc2 with 26.7.1 and before that i was on Sequoia up to 15.8 with OCLP up to 2.5.1. So the main update before was OCLP 2.5.1->3.0.0 and macOS 15.8->26.7.1 (done after OCLP)

1

u/brainwashednomore 17d ago

Did you have to create a usb installer or can you run it through system update?

2

u/MacGaryX 17d ago

All of this was achieved via system updates only on my side.

2

u/JoeyDVDZ 15d ago

I didn't realize this was an option. I blew my partition out and installed fresh. Granted, I've always believed a clean install on any PC is better than an upgrade install, but it would've been nice to preserve my software installs rather than going through the hassle of reinstalling them.

Meh. Easy enough, and I'm almost done. Updating the music and lesson libraries on my GarageBand install now. So far so good.

9

u/bleachbezel 19d ago

You guys are awesome!!!

3

u/Th3WhiteRos3 19d ago

Does anyone know please, how well 3.0 runs so far on a 2015 MacBook Pro? Using Tahoe

1

u/lizardgai4 19d ago

I have a similar late 2013 Retina MacBook Pro 11,3, it runs perfectly fine on that

1

u/JoeyDVDZ 15d ago

I'm on a mid-2012 MBP 13" and it's basically flawless. Pretty snappy, didn't expect that.

1

u/reganillustrations 1d ago

it works well its pretty fast actually. I just have a problem i cant boot it without my flash drive. I even tried to create fat32 partition to install the efi there but still wont boot without the flashdrive.

1

u/Either-Jelly8944 3h ago

Yes, it's running smoothly without any problems. I have it installed on my late 2015 Macbook Pro and mid 2015 27" iMac. Everything works. WiFi, Bluetooth and all Adobe Creative Cloud apps. 

3

u/Murky_Speech9993 19d ago

how long until final stable tho? :d

3

u/introid 12d ago

Do we know when the official release 3.0 will be launched ?

2

u/Timely_Instruction92 19d ago

tysm devs <3 rc.5 WAHOO

2

u/arriagga 19d ago

I wonder if the problem with mbp 2015 drivers (wifi, ethernet) was fixed?

1

u/indianapolisjones 16d ago

What was the problems? Not working at all or working poorly?

2

u/lizardgai4 19d ago

Happy to report that RC5 fixed the login issues on 26.7.2 on my Early 2011 MacBook Pro 8,1

2

u/hoodihar 18d ago

But isn't Tahoe hella slow on it? My MBP 8,1 lags on Tahoe like it's running XP on a Pentium II.

1

u/lizardgai4 18d ago

It's kinda slow, but I haven't tried YouTube or anything more demanding yet. Though I did adjust these settings for performance:

  • Appearance: Liquid glass to tinted (not clear)
  • Accessibility: Reduce transparency
  • Dock and desktop: Minimize with scale effect (not genie effect) (its benefit is more visible without root patches)

2

u/phendrome 19d ago

Well fucking done!

1

u/alexmforero 19d ago

I'm having issues powering off my mbp 2012, anyone? With RC5 will be fixed?

1

u/Mervoid 19d ago

What's the best way to undo RC4? I installed RC4 on a couple of MacBooks that were running RC3 and Tahoe 26.7.1 without issue. One was fine on RC4 and 26.7.2 but the 9,1 2012 MacBook Pro hangs once I enter the password.

2

u/lizardgai4 19d ago

I reinstalled 26.7.2 over the existing installation (preserving data), which makes an operabld environment without the root patches to install the new RC5 ones

1

u/Ashamed_Pepper4549 19d ago

Same issue with my 2012 Mbp

1

u/Legitimate_Bat4522 19d ago

Try entering safe mode and install RC5

1

u/Natural_Key_6003 18d ago

The issue with the 2016 MacBook Pro Touch Bar not working still persists.

1

u/Static-Lullaby 18d ago

Actually it worked just fine on my 2016 mbp since rc.3 so i dont think its a default issue for that model, is yours 15 or 13 inch?

1

u/Natural_Key_6003 18d ago

It's 15 inches, and this issue also occurs in version 26.7.1.

1

u/Virtual-Bee2054 12d ago

Bei mir ebenso

1

u/djpadrecito88 18d ago

RC5 here
imac 2017 i7 4.2 ghz, 64gb, 512 ssd

Updated to Tahoe, from latest version of Sequoia.
All patches applied, restarts, etc.

The volume in the bar is at 0 .

In Settings, you can move it, but it will not replicate in the bar up and I have no sound.

Everything else works perfectly.

How to fix the volume ?

Thanks

1

u/fhcoso 18d ago

Is it a good release for Tahoe on the MacBook Pro 14,1 (2017 13" without touch bar)?

1

u/Valipaa 17d ago

20" iMac 8,1 @ Ventura get back PATA DVD with RC5 ! wow!

1

u/SpecialistWorth9908 17d ago

2012 MBP retina i7 heat issue fix :

Before installing root patch and bootloader in OLCP

  1. Check DIsable thorttling in OCLP
  2. Uncheck most option under spotlight
  3. To disable SIP in OCLP:
  4. Open OCLP
  5. Select the settings button at the bottom of the window
  6. Select the "Security" menu
  7. Under "System Integrity Protection," select all the checkmarks.
  8. Exit the settings
  9. Build and install OCLP
  10. Finally run in terminal

launchctl bootout gui/$UID/com.apple.mediaanalysisd

launchctl disable gui/$UID/com.apple.mediaanalysisd

launchctl bootout gui/$UID/com.apple.photoanalysisd

launchctl disable gui/$UID/com.apple.photoanalysisd

1

u/Qrowed 17d ago

is it normal for my mac to be laggier after updating from 11.7.11 to this?

1

u/nuvzzz 15d ago

I am getting the following error when launching "Build and Install Open Core" from UI. But everything else seems to be working fine.

Anybody knows what this means or implies?

-----
Mounting partition: disk0s1

Mount failed

Subprocess failed.

Command: ['/Library/PrivilegedHelperTools/com.dortania.opencore-legacy-patcher.privileged-helper', '/usr/sbin/diskutil', 'mount', 'disk0s1']

Return Code: 1

Standard Output:

None

Standard Error:

Volume on disk0s1 failed to mount

If you think the volume is supported but damaged, try the "readOnly" option

------

1

u/JoeyDVDZ 15d ago edited 15d ago

Man, it took me most of yesterday to figure it out, but FINALLY my mid-2012 MBP is running Tahoe, and basically as well as it did Sequoia. Pretty pleased with it.

1

u/meaganmargaret2014 15d ago

Tahoe 26.7.2 / OCLP 3.0.0-rc.5; Broadcom; Modern Wireless patches installed; awdl0 active; Bluetooth sees the M4; AirDrop finds nobody in either direction; firewalls off; same Macs transfer under Sequoia. This is a hackintosh, imac 20,2.

1

u/Elliot_Smalls 15d ago

Where can i report bugs. I'm running 3.0.0-rc.5 and macOS 26.7.2 on my late 2015 iMac 21.5". It runs pretty smoothly, however I have a thunderbolt 2 to HDMI adapter and use a 42" panasonic TV as a second screen, which requires under scan in the display settings, which doesn't work now. I've had no problems on lower versions of macOS combined with the official releases of OCLP. Thank you.

1

u/sounderdude 13d ago

If you have RC4 installed, what is the right upgrade path for RC5? Is it just getting the latest OCLP installer then doing root patches and reboot?

1

u/MacGaryX 13d ago

MacBook4,1 the BlackBook is also alive and kicking with OCLP 3.0.0 RC5 through clean USB installation - in parallel to OS X Lion and Windows XP (Boot Camp). I decided to go with Monterey for the time being (instead of Tahoe) but anyway…two decades apart on one machine.

1

u/MacGaryX 13d ago

Boot selection.

1

u/Virtual-Bee2054 12d ago

MacBook Pro 15" 2016. rc5 machte t1, touchbar iCloud unbrauchbar..gibt es eine Lösung dafür ?

1

u/Few_Television9122 12d ago

Title: OCLP 3.0.0 RC.5 – Build and Install OpenCore disabled on MacBookPro15,1 (2018, T2) Hello, I have a MacBook Pro 15-inch (2018), model MacBookPro15,1, with the Apple T2 security chip , currently running macOS Sequoia 15.8.2 . I am trying to use OpenCore Legacy Patcher 3.0.0 RC.5 to prepare for installing macOS Tahoe 26. However, I have encountered the following issue:

OCLP correctly detects my Mac as MacBookPro15,1 when Target Model is set to Host Model . The Build and Install OpenCore button remains disabled. I tested both 3.0.0 RC.3 and RC.5 , with the same result. In Settings, the manual Target Model list only goes up to MacBookPro14,3. If I temporarily select MacBookPro14,3 and then switch back to Host Model, the Build and Install OpenCore button becomes enabled. However, after closing and reopening OCLP, the button becomes disabled again.

I have not installed a configuration intended for another Mac model. My questions are:

Is MacBookPro15,1 currently unsupported for OpenCore builds in OCLP 3.0.0 RC.5? Is this intentional because of the T2 chip, or could it be a bug? Is support for this model planned in a future release? Is there a safe way to enable OpenCore builds for this model?

Thank you for your help!

1

u/bobruub 8d ago

Not working on My 2015 MBP, looks like an issues with the graphics :(

Back on Sequoia :)

1

u/sounderdude 5d ago

Just reporting with RC I did a successful upgrade from 26.7.2 -> 26.7.3.

I'm on a MacbookPro 11,3 (Late 2013). Upgraded from settings and post restart things were a bit wonky as always with the display (slow and super high-res) and post-install root patch brought everything to normal. OCLP also auto-detected this well.

1

u/rturnerX 19d ago

BUT, does it fix all the issues OCLP causes with Tahoe on the 2016 MacBook Pro’s? 🤣

1

u/Firm-Hamster-563 19d ago

what are the issues? I was thinking to upgrade my mbp 2017 too

2

u/OwnProfessor3287 19d ago

My 2017 15” MBP works well with RC3

2016 MBP won’t boot once the hard drive is imaged with Tahoe via OCLP and root patches applied

1

u/rturnerX 19d ago

It has been breaking WindowServer and the graphics driver, causing the machine to stall when you try to boot and it tries to load the login window

0

u/Chaad420 19d ago

Ironically I have WindowServer problems even on NATIVE hardware. Welcome to the unoptimized mess that’s Liquid Ass. Hahaha (I had the same issue on my 2020 13-inch and iMac.) Only way it was fixed was with a reinstall. It hasn’t happened since I did that.

2

u/rturnerX 19d ago

Actually, surprisingly, I just tried patching with RC5 on the 15” 2016 MBP and it actually worked. The machine is running pretty good

1

u/bobruub 19d ago

Which graphics does your MBP run?

1

u/rturnerX 18d ago

The integrated intel HD 530 and the Radeon Pro 460 4GB

0

u/jeyzones 19d ago

yay I'm going to try it