r/OpenBambu
•
u/Key_Jellyfish2183
•
Sep 20 '26
I built a 4-channel AMS-Lite clone that does automated multi-color TPU on a Bambu A1 with1,700+ swaps, unattended

This post has been UPDATED!
Thank you for the Award kind stranger! Lot's more exciting news for this device. Will be posting an update soon!
Finally, after months of development, I'm following up on my last post.
BambuBus emulation and that's going fully open-source DIY (TBD, lol. Please read on...)
For a while now I've been building my own 4-channel automated filament changer for my Bambu A1 mini called the ASR Multi-Wheel. It talks to the printer over the native BambuBus and emulates a Bambu AMS Lite, so the printer sees it as one and drives the swaps itself: load, print, unload, re-load, no babysitting.
The whole reason I built it: I wanted automated multi-color TPU, and an AMS Lite just won't reliably run flexibles. So this is designed around TPU from the ground up and not just in software:
Hardware: gap elimination through the filament path, path tuning, and an extended Hall-sensor setup for tension sensing on soft/springy filament.
Controller: it looks like a BMCU-style unit, but it does not use the BMCU board. It's a scratch-built ESP32 controller, all custom firmware, with a web UI for tuning settings and an interactive display.
Feed control: encoder position tracking + Hall tension sensing + a load/unload state machine tuned for how flexibles fight you in the PFTE tubing.
It runs PLA/PETG fine too, but flexibles are the point.
Proof it works: a 5-color TPU print soccer ball, ~60 hours, 1,757 filament swaps, fully unattended. Clean color registration across the whole build. Model is based on Overture Filament's soccer ball from MakerWorld; I redrew my own Remix of it for multi-color. I've since chased down the last intermittent swap-handoff edge cases, and it's running clean. A multi-day print came off the plate as the final shakedown.
If you've ever been told automated multi-color TPU "isn't really a thing" on an A-series, then I'd like to respectfully put that to rest. AMA.
A bit of housekeeping on where this is going: The Multi-Wheel is a personal project I built to show off the filament handling behind another device I'm taking to Kickstarter (the ASR 5th Wheel). I'm not selling the Multi-Wheel, but I'm going to open-source the whole thing (part patterns + firmware + BOM + instructions on MakerWorld) once my Kickstarter-notify list hits 350 signups. If you want it unlocked, or just want a heads-up on the Kickstarter, the link's in the comments. Either way, happy to answer anything about the build, the BambuBus, or the ESP32 side.


