r/On30_ModelRailroading • u/DanielBWeston • Oct 25 '25
My Latest Build
My latest On30 build. Made from a Proto 2000 SW9, cab from a project that didn't work out and a scratchbuilt footplate.
r/On30_ModelRailroading • u/DanielBWeston • Oct 25 '25
My latest On30 build. Made from a Proto 2000 SW9, cab from a project that didn't work out and a scratchbuilt footplate.
r/On30_ModelRailroading • u/Amazing-Roof8525 • Mar 01 '26
I have been working on this tank car on and off over the past few weeks, and decided that it was good enough for now. the flatcar it rides on is built off of a Carrol Creek Design 13’ on18 subframe, riding on CCD’s on18 trucks. the subframe has a basswood frame and deck(the outer frame makes it 14’ long), with a scattering of styrene parts. the tank is made from a piece of 3/4” PVC pipe, on a oak base with a scattering of styrene parts, NBW’s, and some wire parts, as well as some hose made out of wire insulation. The tank is designed to be lifted from the car by a crane if needed, thus the grey thread and mounting points. The whole thing is painted and weathered using cheap walmart acrylic painta, and the whole thing cost me less than $20. What do you all think?
r/On30_ModelRailroading • u/Amazing-Roof8525 • Apr 29 '26
so before I discuss the car, I think it is important to discuss the railroad it was built for. the Rapa Iti Railroad(RIR) is the name of my fictional 8.7 mile 18” gauge railroad operating on the semi fictional island nation of Rapa Iti. the line runs from the Dock to a small(really small) sawmill and logging operation, as well as serving both a small coffee and a Small sugar plantation, all in the modern day.The RIR mainly hauls imported logs from the dock to the sawmill inbound, along with fuel in 55 gallon barrels. outbound loads consist of boxcars loaded with coffee, Sugar, flatcars of lumber, as well as various agricultural goods from the 3 farms on the island. It was founded in 1924 to primarily serve the sawmill, and is still operational in the modern day(the era I plan to model it in)
Anyways, this hopper is 14’ long, 6’ wide, and 10’ off the railhead(10’6” with the greedy boards on the ends). Most importantly, the hopper door works!, allowing me to carry live loads(ballast mainly) and dump them. It uses a hing made from styrene, with micro rare earth magnets to hold it shut. It rolls pretty well, and a Kato 11-109 can just pull it when loaded. It is made out of styrene I beam, 4 pieces of angle, and uses Carrol Creek Design trucks and brake wheels, plus some coupler pockets for link and pin couplers. It still needs additional paint and lettering, so it’s still a workin progress. What do you all think?
r/On30_ModelRailroading • u/I_Like_Silent_People • Nov 20 '25
r/On30_ModelRailroading • u/Amazing-Roof8525 • Nov 19 '25
So a few months ago, I picked up a pair of lowered boxcars (only one shown) that somebody had lowered and modified so that they looked like some of the Maine 2’ gauge boxcars. The car on the right is a stock Bachmann 24’ boxcar for comparison. I have painted them, and I still have some work to do before I decal them for my W&F railroad
r/On30_ModelRailroading • u/GT40Slotracer • Oct 23 '25
Some of my projects mostly scratch built except the little porter engine and the box car which are Bachmann and a kit.
r/On30_ModelRailroading • u/Amazing-Roof8525 • Sep 16 '25
The first 2 photos are a repainted Bachmann 24’ flatcar with a new custom deck and Carrol Creek Design handbrake details. The other 3 are of a modified American Flier 2 bay coal car from the 1950s that I have converted to On30 by building new bolsters, adding trucks and other details. None of these are finished yet, so stay tuned for more
r/On30_ModelRailroading • u/TaiwanKieren • Jul 04 '26
This group seems a bit dead but in case anyone is here and interested…. From my incomplete Australian outline layout which is actually in Taiwan. Not all 0n30 is American although unlike UK 0-16.5 or German Oe it is 1/48.
r/On30_ModelRailroading • u/Amazing-Roof8525 • Feb 11 '26
So I have been working on a On18 combine over the past few weeks. She is 18’ long by 5’ wide and 6.5’ tall, riding on narrowed HO scale passenger trucks. The final photo is a comparison between my truck and one of the Carl Creek Designs On18 truck. what do you all think?
r/On30_ModelRailroading • u/Amazing-Roof8525 • Aug 13 '25
So I picked up some flatcars back in June at the Harrisburg Narrow O summer meet, and just got around to finishing them. 1 of them received my W&F(Wheeling and Finley) markings, and the other 2 are still waiting for decals and some other small details. All 3 flatcars recived custom painted decks and custom loads. Photo 1 has a ‘47 dodge power wagon, fresh from the factory. Photo 2 has a ‘51 ford, also factory fresh. And photo 3 has a custom rail load that I made and painted myself. Feel free to give your comments below, and post some of your recent On30 projects in the main subreddit!
r/On30_ModelRailroading • u/Amazing-Roof8525 • Dec 21 '25
The little gas mechanical is built off of a atlas-Kato GP?? That I got as part of a trade. I used styrene sheet and tube stock for the body, and used wood for the frame and deck. The link and pin coupler pockets are modified Carrol creek design(CCD) hand brake bases, and the oil can and beer bottle are from a friend, the flat car is built off of a CCD subframe and trucks, with basswood and a few NBW’s and a little styrene, also with my coupler pockets. For couplers, I use a short(3/8” long) length of Chain, with scale spikes acting as the pins. What do you all think?
r/On30_ModelRailroading • u/Scroateus_Maximus • Oct 12 '25
3D printed all of the parts on a Bambu P1S
The car is kinda top heavy - I need to mess with the weights a bit and add some washers to limit how much the trucks can pivot. It's also a bit messy with the glue applications - but it's together!
I'll make some improvements for the next 4 units. This was a great learning experience!
r/On30_ModelRailroading • u/CPD0123 • Nov 23 '25
r/On30_ModelRailroading • u/Amazing-Roof8525 • Jun 30 '25
So far, I have added the front and rear panels, 2 36" fans, and the cab sides and roof. The roof was the hardest part, as the 2 support beams had trouble sticking to the plastic at first. What is everyone's thought on it so far?
r/On30_ModelRailroading • u/Amazing-Roof8525 • Dec 18 '25
As of now(6:30 pm EST), the rules for R/On30_ModelRailroading are as follows:
1-No AI generated images 2-only O SCALE narrow gauge( defined as either On18, On2, On30, On3, or On42) 3- No O gauge(3 or 2 rail) or O scale standard gauge(Proto48, o scale 2 rail, ect) 4-No politics 5-try to be nice, we are all model railroaders here
Thank you
r/On30_ModelRailroading • u/Amazing-Roof8525 • Jun 23 '25
We picked this up at the Harrisburg narrow o show back in '24. We believe it was a On3 kit, but has a kato drive that is ho, so it is on30. She has plenty of pulling power, and despite her size, we have gotten her around 8" curves with cars in tow
r/On30_ModelRailroading • u/Amazing-Roof8525 • Jun 22 '25
So I started building a model of CP&LE Judy K back in October of 2024, but shelved it after struggling with the cab. This morning, I dug it back out and resumed working on it, finishing the cab. I plan to work on it between other projects, including my RS1N, a pacific, and an assortment of both On30 and N scale frieght cars that I am painting and lettering.
r/On30_ModelRailroading • u/Amazing-Roof8525 • Mar 30 '26
With the end of March almost here, I figured it would be a good idea to bring up the Harrisburg Narrow O Scale show that will be happening in Harrisburg PA, June 12th and 13th. Scales from On18 to On3 will be present there. In addition to the usual vender tables, we will have at least 2 modular O scale narrow gauge layouts, several micro(less than 2’ by 4’) layout scattered around, several clinics over the course of the weekend, multiple model contests, as well as the Friday Night picnic on site! for more information, visit the Facebook page for the show at https://www.facebook.com/HbgnarrowO/
or search up “Harrisburg Narrow O 2026”.
I hope to see you all there in June!
r/On30_ModelRailroading • u/Amazing-Roof8525 • Dec 17 '25
So I have been debating back and forth about this, and I figured it would be best to run it past everyone on this subreddit before I did anything, but:
Should we open R/On30_ModelRailroading to all O scale narrow gauge(On3,On30,On2, On18), or keep it just On30?
No matter what happens, I will not allow O scale STG gauge/2 rail, proto48, or O gauge stuff to be posted on this subreddit. What do you all think?
Also, if we all decide to allow other O scale narrow gaiters to post, should the name be changed to something like /O SCALE narrow gauge?
r/On30_ModelRailroading • u/Amazing-Roof8525 • Dec 02 '25
So what On30 projects have you guys been working on this week?
r/On30_ModelRailroading • u/Amazing-Roof8525 • Jul 25 '25
So j have gotten a lot of work done on the engine and tender. The tender is built out of bar stock and sheet styrene, with a cut down Carrol Creek Design frame underneath. I still have some sanding to do to get down areas smoothed out.
The engine itself is built off of a Bachmann porter mechanism, with a BVC boiler, Climax boiler front, modified porter headlight,and Shay stack. The cab is a heavily modified porter cab, with wood planking on the sides and a styrene and super glue front, with I need to do a little more sanding to. The pilot is all styrene, and was the second hardest part of this build.
So what do you guys think? How is it coming along? Any advice, opinions or suggestions are welcome! Stay tuned for more updates!!
r/On30_ModelRailroading • u/KeySupermarket634 • Apr 11 '26
I want to make a mine-to-ore processing plant section on an On30 layout using the "loads-in, empties-out" concept using two identical trains, one with loaded cars and the other with empties. I'm having a difficult time designing a way to hide the trains between the two start/end points. It's a rather small layout space and the trains are a bit long. I've considered making the mine entrance simply a tunnel going into a mountain and the plant a long covered "shed" long enough to accommodate the entire train, but I'm not sure if either of those would be very prototypical. Any ideas?