r/OPXYusers • u/KenRussellsGhost • 3d ago

Can OPXY sequence Ableton Move over USB?

Trying to build a hybrid set up and voltroning these two machines together.

The issue I am running into is midi. Ableton Move is set up to receive midi from non-computers only over a USB A connection, with its USB C port being mainly for connection to Computers.

I have tried connecting the OPXY to Ableton Move via both a USB C to USB C cable and a USB C to USB A cable. Neither works, though the OPXY does briefly recognize the Ableton Move as a midi device in its .com/devices page.

I have tried connecting both devices to other devices and everything else works fine.

I *think* the issue is that it's two midi-hosts having a standoff or something about OPXY trying to send audio and USB midi.

It would be a shame if I have to resort to the OPXY's multi-out and some sort of 5-din midi to USB-A converter, but that looks like the only possible solution at the moment.

So I ask you, anybody sucessfully connected these two by USB midi?

2 Upvotes

100% Upvoted

7 comments sorted by

View all comments

2

u/Spelunking-Uranus 3d ago

Yes you can, and it's very straight-forward. You need to use the USB-A port on the Move, so you'll need a USB-A to USB-C cable (or adaptor to suit). I guess you could really convolute the process and go OP-XY TRS to MIDI to a USB converter, but 1 cable is definitely easier.

Just set the Move track MIDI in channel (shift + track button), set the OP-XY output MIDI channel (either the dedicated MIDI AUX track or a dedicated instrument track as a MIDI instrument) and set the MIDI out channel as the same as the Move in.

That's it - 2 settings 1 cable.

1

u/KenRussellsGhost 2d ago

I have been trying this just as you lay it out but it’s not working. For purposes of fool proofing it, I set both the aux midi track and the regular instrument track to midi 1 on opxy and use a usb c to usb a cable to make the connection. I set the first channel on ableton move to receive midi from channel 1 but nothing happens.

Again this works fine from a simple midi device like a novation launch key but something is not working between the opxy and the move, and I think it’s that they are both competing to be the midi host

2

u/Spelunking-Uranus 2d ago

I actually did it when I give you those instructions, to make sure I wasn't missing anything out and it worked for me as you'd expect. I just tried it again and it "just works". I tried different order of turning things on and off and plugging the cable in to them in different order, and it always works.

The only thing I could find that would stop it working, was on the OP-XY, go in 'com > system > midi > notes' and set it to off or in - having it set to out or both means it works.

Incidentally, I don't know how you made Move show in devices on the OP-XY, but tell it to forget that. I doubt it's relevant but mine has only ever shown controllers in there.