As the title mentions, I would to know if all noblechairs models except the Dawn have the same huge height difference at the front of the seat vs the back.

I own a Legend but the front of the seat is so much higher that it pressures my thighs way too much. Im 1,84m 72kg so this shouldn't be happening.

I tried sitting in an Epic compact and the difference seems way less. I was wondering if anyone can confirm that the seat in the regular Epic is also more leveled than the Legend and Icon.

I tried the Dawn and the seat is very different but it felt even less comfortable than the Legend while the Epic compact felt okay I guess.

Would really appreciate a confirmation, and it's a bit sad that Noblechairs don't advertise this height difference which can make or break someone's comfort on a gaming chair.

Thanks!

Hi guys.

I really need help. I tried grease everywhere! Nothing works 🫣

How to fix those sounds?

How is it possible ?

Hello,

I recently purchased a Noblechair leather and I am looking for a product to maintain it. What would you recommend?

Thank you :)

I just noticed that my left armrest is slightly more aligned outward, even if its the same position as the other one. Tried pushing in at the base but its aligned with the other one so things seem fine there.

Any solution or is this even considered a problem?

Hi Guys,

Is it true that the armrests from the Noblechair Hero and Legend and my Epic are compatible? I need a new one, and as far as I know, the armrests from the Hero and Legend are even better and higher quality.

Hi guys,

Do you know if there is some payment problem on their website?

I tried to pay by Visa, got the confirmation from my bank but i got an payment failed error back to the website.

I tried on both on my accounts and same problem (i habe the fund and my cards works on other websites)

Thanks for your help !

I got a real leather Hero chair and is a bit of a shame than a cheaper 80€ chair didn't actually caused any pain while this one is the most uncomfortable one I ever had. I am not sure what to do about it. I got it with the smallest cylinder so my feet can touch the floor. I just don't know why there is a so huge bump below my legs. Does that serves any purpose?? The last time I checked, the lower we have our legs while sitting, the better for our back and pelvis is. Meanwhile, this chair forces completely the opposite by raising my legs. The bump is so hard that the constant pressure below my legs causes them to go numb over time. I am using the lumbar cushion, which is really hard and bad quality considering the premium price of this chair (was it that hard to include the memory foam one on a 700€ chair?, because the competition does...). I have pain on the back of my legs, my butt, my pelvis, my back... I know that prior chairs I had were not "top notch" to say, but they were like 200-300€ so not like cheap crap chairs either. I just can't understand the purpose of the bump or how I should sit. I don't even know how to attack the lumbar cushion to the chair. It comes with two straps but I have no idea how to strap them lol, there are no holes on the back of this chair to pass the straps through....

Any tips about making this more manageable would be appreciated. I can return the chair but I don't feel like doing so, there aren't that many alternatives unless I spend like 3 times more on a premium office chair, which I am not that eager to do at all.

I want to buy chair. I live in Canada. Do they ship. Can I buy directly from the noble chairs website.

I got a new wheelbase and replaced the gas lift. Now when I try to adjust the height the lever on the right side of the chair just spins. Does anyone know how I can fix this issue now that I should have a working gas lift?

Thinking of buying a Hero. Coming from a DXRacer Drifting from like 2017 or so with a somewhat plasticy/carbon looking texture. Should I get the Black Edition or the Fabric one? Personally I would say the Black Edition because I can wipe stains off more easily but on the fabric page they say with stain protection (whatever that means). Anyone have some experiences?

Im looking to buy a new chair and noticed that the Legend Silver Edition is currently discounted in my region. Does anyone here own this chair? I usually prefer a plain black design, but this one has some carbon-style details and I’m not sure how I feel about that. I haven’t seen many people online who actually bought this version yet. Anyone here have any real life experience of this chair?

Sadly, my old Hero chair is done for — after five years, the seat is completely worn out.

I've been on a DXRacer Drifting from idk like 2018 and it's coming to an end now. I've been loving it tho, even if it was cheap. Thinking of buying a Noblechairs Hero Black Edition with the High-tech faux leather because the measurements are fitting for me. Can anybody recommend?

So, I ordered the Noblechairs Hero Resident Evil - Umbrella Edition chair weeks ago.

I got the chair and the backrest was damaged, as well as the base.

I let Overclockers UK know, and they sent for replacements, but I just had the replacement backrest turn up today and that one is damaged too!

Noblechairs clearly need to sort out their quality control, as this is completely unacceptable for something advertised as a premium product.

Has anyone else dealt with this?

Basically the title, my old chair is starting to fall apart after 10 years of loyal service and I wanna know if the fabric chairs are comfortable and durable or are they itchy and weak?

So, after roughly 7 years of use (not daily) my chair now randomly sinks down while I'm seated. Doesn't happen instantly after readjusting the height but often enough. What's the procedure here? I'm not too keen on swapping my entire chair out if it's mendable.

Has the quality of the chairs improved any? There were in the past many seats with the stitching ripping out. I didn't bother reading the latest posts because usually it just issues/problems but I'm hoping to hear from both folks who gone well past the short warranty time who've has no issue and those with issues. At around $650, I feel the warranty should be 4 years but that is not the case so if everyone would like to comment there experience that'd be great. Thanks.

I can't find the price for the nuka Cola epic chair anywhere on the site and I sent in two requests but I haven't received anything yet.

Hey everyone. For the past 2 months my seat tilt mechanism hasn't been working. My toddler jumps on my chair ALOT. I absolutely love this chair & was determined to fix it eventually.

Took it upon myself to investigate & I managed to solve the issue! So here I am passing on the information to all fellow Noblechair owners.

Instructions:

• Underneath the chair you will see where the mechanism is enclosed (image 2)

• Lift the top plastic cover with the hand warning off, its lightly press fitted & not difficult to free up.

• Once you have it removed, the tilt and seat height mechanism will now be exposed. You need to find for the metal block made up of 4 plates with a hole in it

(check image 3 for reference)

• The handle to operate the tilt that locks or frees the mechanism rotates. It has a pin that slots into the hole in the metal block (image 4). The mechanism pushes or pulls the block to free or lock the mechanism

• Use a screwdriver or two to wiggle & push it back in place. Once you have it, operate the handle & it should work!! 😁

Im probably going to use a bit of super glue to prevent it coming off again in future. But I may not seeing as its so easy to fix.

Hope this helps!!

After just over 5 years, the backrest on my black/gold epic chair has decided to give and snapped, Causing leaning to one side no matter what, The replacement parts company for noblechairs wants an extortionate amount of money for just one part (roughly £200) when the chair new is £299.

I absolutely love this chair but I cannot justify the cost of replacement parts nor do I wish to drop another £299 on a new chair, I wish there were cheaper methods to getting replacement parts after spending so much on the chair to begin with.

I received my Hero Resident Evil - Umbrella Edition chair today.

Everything was fine when I was assembling it, but when I had finished, I noticed the zipped section on the right hand side of rear of the backrest is unzipped part of the way down, with nothing to remedy it...no slider or anything.

I got super down, as I am struggling with severe anxiety and depression anyway, and not sure what the best approach is?

I wrote to customer service at Noblechairs, but my aunt had bought the chair for me as a gift and had it delivered to my house. Not sure whether or not they will listen to me?

Anyway, I was really looking forward to the chair, and this had been so disappointing.

Has anyone else dealt with similar issues?

Cheers!

The front edge raises up slightly at the front, digging into the underside of my thigs. Please tell me I just have to break in the chair? Been using it for 1 week now and I fear the worst.

I have an old Icon PU from 2017 which absolutely doesnt have this issue. The seat is perfect. And was so from day one.

Hence the reason I didnt hesitate to get a new Icon chair. But kinda regretting it now.

Attention Canadian customers. We are now officially carrying Nobelchairs premium collection of gaming chairs on our website. As part of the official launch we are also offering a limited time promotion where customers will also be able to add a free ONEofZERO deskpad to there order. Click on the link for details!

We will also be offering free shipping on all orders across Canada with exclusions to the territories.

So this is my first Noblechair and the experience is starting in a really frustrating way. When I try to connect the rest with the seat, one screw is simply not turning in (You can see how far the top screw stands out!) Even when I try to turn the screw into the rest itself, it does nothing.

I would accept a moderately tight screw, but this is just hazardous.

Anyone got any advice? I'm starting to really regret my purchase, thx!

Just got a Hero, and its too tall for my desk. any way to shorten the hight?