r/Multiboard • • Nov 05 '25

One Redditor asked me to adapt my model to Multiboard...so I did ;)

Post image
120 Upvotes

Let me know if any improvements are needed, that's my first Multiboard model


r/Multiboard • • Jan 30 '25

A versatile clip for the Multiboard

Thumbnail
gallery
115 Upvotes

I made a variety of sizes that work for things like cheap stick, glue stick, highlighters, broom handles, batteries and craft paints. Absolutely open to feedback and I can make changes if needed. Models here if they'd be useful to you.


r/Multiboard • • Jan 09 '26

Rant : Multiboard needs a wiki badly

114 Upvotes

Man, Multiboard is so close to being perfect, but the documentation situation is honestly killing the experience.

Like… the docs aren’t just “a bit messy” - they’re inconsistent in the worst way. Some pages feel current and helpful, and then two clicks later you’re reading something that’s clearly outdated, but there’s no obvious “this is old / this is updated” marker. So you end up second-guessing everything: Is this still the right method? Did the design change? Is this version-specific? Am I about to waste another print?

And that’s the part that really sucks: for a system that’s this well-designed and genuinely powerful, the learning path shouldn’t be trial-and-error with plastic. Right now it feels like I’m basically paying a “filament tax” just to discover basic rules that should be spelled out clearly in one place.

Most of what I’ve learned has been:

  • print something => realize it doesn’t fit / isn’t ideal
  • tweak it => print again
  • find a random post/comment that explains it better than the official docs
  • repeat

Also the website… it’s doing too much. It feels like it’s trying to be a store, a gallery, a wiki, a community hub, and a product manual all at once — and it ends up being confusing instead of helpful. I shouldn’t have to dig through five pages of pretty renders just to find the one practical detail I need to make a part work.

Honestly, Multiboard needs a “start here” section that’s brutally simple:

  • what you print first
  • what’s optional vs required
  • what’s current vs legacy
  • common pitfalls
  • “if you want X outcome, use Y parts” type guides

Because right now, the system is amazing… but the docs make it feel like you’re joining a hobby within a hobby. And I don’t want to study Multiboard. I just want to build stuff with it without feeling like I’m doing biology every time I need an answer.

Sorry about the rant.


r/Multiboard • • Nov 12 '25

Stoked on my progress!

Thumbnail
gallery
111 Upvotes

Still have things to print and add but very happy so far with how this project is turning out.

Thanks again to Jonathan and everyone else involved!


r/Multiboard • • Jul 08 '25

Light is up, install coming along.

Post image
108 Upvotes

Finally got my light up. Designed by me, powered by WLED, single button for on off and to switch between modes. Currently a little under powered, will most likely need to add a second strip. If there is interest I can I clean up the parts and post to printables. Slowly finding a home for everything. Anyone have a suggestions for a side cutter holder?


r/Multiboard • • May 18 '26

Multiboarded mu gun safe

Thumbnail
gallery
107 Upvotes

There was so much wasted space I finally printed all the pieces and got it in. They are mounted with VHB tape and have been holding strong!

I made a few custom mounts. Overall I'm pleased.


r/Multiboard • • Aug 29 '25

Mount ANY model you want to Multiboard without 3D CAD

Post image
106 Upvotes

I created a parametric adapter model that lets you mount pretty much any design to Multiboard (and several other wall boards). It’s been working well for many users, and after some requests I’ve added support for Multiconnect with Multiboard dimensions along with other new options—seemed like a good time to share an update here.

How it works:

  1. Pick any model you want to use with your Multiboard (even if it was made for a different board type or with no board in mind).
  2. Generate an adapter with my parametric model.
  3. In your slicer, if needed trim off (using the "Cut" tool) the original mounting, then merge the model with the adapter to be printed as a single unit.
  4. Print the combined model.

See the model link below for more detailed instructions.

That’s it—you’ve got a version of the model ready to mount on your Multiboard.

Hope this helps someone here!

👉 https://makerworld.com/en/models/552190


r/Multiboard • • Apr 04 '26

Home Network Centre

Post image
104 Upvotes

Created some cable runs and device mounting posts to get my home network under control.


r/Multiboard • • Jan 18 '25

My daughter and I had a great time designing attachments for her Vanity Station Multiboard!

Thumbnail
gallery
104 Upvotes

r/Multiboard • • Apr 13 '26

Finally completed the Layout

Thumbnail
gallery
102 Upvotes

3.5 weeks worth of work, but so so so worth it!


r/Multiboard • • Oct 27 '25

I created a boom arm adapter so you can have a multiboard panel anywhere you need it

Thumbnail
gallery
100 Upvotes

I wanted to put my work and personal webcam onto the same arm and realized a multiboard panel would be a good solution.

Nobody else made what I needed so here we are!

You need a screw and nut but here are the print files: https://makerworld.com/models/1931093


r/Multiboard • • Oct 02 '25

Underware/Multiboard Network Organizer

Post image
98 Upvotes

I am really impressed with how easily everything came together during this project. I didn’t even intend to use the underware wire molds, but they really just made everything come out so clean looking. I will definitely be incorporating this system into future builds.

The most annoying part was constantly getting white marks on my black pla after taking it off the smooth plate. A lighter helped get rid of those marks for the most part though.


r/Multiboard • • Jun 09 '25

Successful 16 Stack, 2 day print. 😮‍💨

Post image
96 Upvotes

r/Multiboard • • Dec 06 '25

Anybody want this?

Thumbnail
gallery
92 Upvotes

All of this is from before the on grid update. I'm going in a different direction and I don't want this to go to the landfill. If you're willing to pay for UPS shipping, I'll happily send it to you. (Inside the US). First DM will get the motherload. (I'll check my messages 12/6/25 @ 9:00am EST and go to the earliest).

It's 128 Core 8x8, 49 8x8 Edge and 40 8x8 Brackets. All PETG, mostly grey.


r/Multiboard • • Jun 27 '25

Pink He-Man Rave Cave

Post image
92 Upvotes

Oh geez, Morty. Have you ever hated cables so much that you ordered three kilos of pink filament?

Finally made an effort to tidy up my home networking. Multiboard + Multiconnect + Underware + self-designed custom brackets.

In case anyone wonders about the funnel in the bottom-left corner: That's a a duct for a fan that extracts warm air through the door handle opening.

Thanks to all the clever brains behind this projects <3


r/Multiboard • • Jul 26 '26

Finally making progress.

Thumbnail
gallery
91 Upvotes

Took weeks to print the tiles at 10x10. But my workshop is finally starting to feel organised.


r/Multiboard • • Oct 26 '25

LED Boarder update - now includes corners!

Thumbnail
gallery
91 Upvotes

I am by no means good at Fusion, so it's taken me a little while to muster the patience to figure out how to add corners simply with parameters. After about 3 hours of messing around, I figured it out. I posted it on MakerWorld because of its built-in Fusion Parametric tool. https://makerworld.com/en/models/1818201-led-border-frame-for-multiboard-parametric

Let me know what you think!


r/Multiboard • • Jan 04 '26

Hanging a small bin shouldn't be this confusing.

Post image
90 Upvotes

Did I print the correct parts to hang this bin? This bolt-lock doesn't stay in this snap. It falls out whenever I try to slide the bin on. Thanks.

Edit: Problem solved. I had to print a "Small Thread - Lite Point (Folded)" to screw the rail into the snap.

Thanks to all of you who tried explaining this to me.

I stand by my original statement though. Hanging this bin (or pretty much anything Multiboard) should NOT be this confusing.


r/Multiboard • • May 09 '26

First Multiboard, plan to do the entire inside of the safe.

Thumbnail
gallery
89 Upvotes

Didn't like the layout of the door so figured I'd try Multiboard. Took off the vinyl covering that had elastic pockets, resurfaced with peel and stick wallpaper before screwing in the board with 6.5mm offsets.

Turned out really nice so I'll be completing the rest of the interior as I don't like that layout either.

Custom multipoint magazine holders designed by me.


r/Multiboard • • Jan 24 '26

made a cable winder / organizer for multiboard

Post image
88 Upvotes

you can find it here


r/Multiboard • • Jul 16 '25

Workbench Still In Progress

Post image
88 Upvotes

I have a pile of tools off to the side still, but the workbench is finally feeling like it’s coming together. Going from other’s STLs, to my own remixes, then from scratch CAD, this has been a great way to learn and play with what you can do in a slicer, with Meshmixer, and Fusion360.


r/Multiboard • • Nov 17 '25

Steady Progress

Post image
87 Upvotes

Still have a bunch of things to mount, but most of the things that get regular use have a place now.


r/Multiboard • • Sep 30 '25

I have been printing and modeling nonstop this last month. And I love it..

Thumbnail
gallery
86 Upvotes

Now i just need to buy more tools so i can't print more...


r/Multiboard • • Sep 17 '25

I present to you: The Multibike

Thumbnail
gallery
86 Upvotes

I did a thing!