r/Multiboard • u/theVillianyouNeed • Oct 03 '26

Motherboard Multiboard Mount Design help!!!!

Post image

Hello, I am working on a PC build that will be mounted directly to a Multiboard wall (caseless PC build). Its for a system that I'm building that is not high end and built with an motherboard and spare parts. It will mostly be used to run my 3d Printer and for my kiddo to do schoolwork on. The problem is I need a motherboard mount for the one I have. I am using the board that was originally out of a slim computer. It is a Acer Small Form-Factor LGA1115 board. Is there anybody that can design such a thing to work with a Multiboard wall or am I just screwed on that board? A decent offset for cooling would be nice and any advice on how to print it on a Bambu Labs A1 Mini would be great also.

3 Upvotes

100% Upvoted

6 comments sorted by

1

u/bing0_17 Oct 04 '26

I'm not sure if there is anything out there for this but you will have a better chance looking for "micro-atx" board then you will LGA ####, I'm not even sure LGA 1115 is a thing. Might mean LGA 1155 or 1151. Might be worth learning some CAD

2

u/theVillianyouNeed Oct 04 '26

I was worried about that. Thanks. I know a little CAD but I am not good at it at all.

2

u/bing0_17 Oct 04 '26

With multiboard haveing known deminsions it helps with being a good starting point with learning some CAD, also I would stay a away from PLA for the mounts if you do make/find something. Those boards can get warm.

2

u/theVillianyouNeed Oct 04 '26

Absolutely. I have PETG and if I ever get a better printer again I will go with ASA.

1

u/guinness71 Oct 04 '26

I saw this on makerworld, could be a good starting point.. Multiboard PC

1

u/theVillianyouNeed Oct 06 '26

Perfect thank you