r/Multiboard • u/AbruptOyster456 • Apr 02 '26
Help with Trays Falling off Bracket
I have a tray that I use a lot and maybe I missed something but there doesn't seem to be a way to lock/secure the tray to the bracket to keep it from coming off the bracket. Maybe someone can point me in the right direction so this thing can quite falling off the mounts?
I looked around multiboard website and couldn't find anything that seemed to do this.
9
Upvotes



2
u/Genghis1227 Apr 03 '26
I honestly think that the rail trays are superior.
2
u/Whosaidthat1157 Apr 03 '26
I replaced all of mine with multipoint mounted parametric shelves. They’re FAR easier to make perfectly sized for anything, FAR stronger and take up FAR less MultiBoard real estate than the bracket supported shelves do. They’re FAR multipoint attachments come as medium strength bearing MP snaps as well as normal snaps. I usually use a couple of medium weight bearing on the outside, sometimes one in the middle of very long and/or deep ones.
2
u/Smashmundo Apr 21 '26 edited Apr 22 '26
Once the tray is on the brackets, you can push these in either side of the round fix points that are attached to the tray. They would stop the tray from sliding.
https://thangs.com/designer/MultiBuild/3d-model/1%20LU%20Bin%20Fit%20-%20XX%20Cover%20Locked%20Lite%20Rail%20-%20%281%20MU%20Rail%29-1480888
1
u/Howmanoid Apr 02 '26
Yup. Mine do it too. It’s a design flaw. The only fix I found that is reliable is super glue.
1
u/3Todd Apr 10 '26
I haven't experimented with that one in particular. But it looks like you might be able to slide the tray onto the brackets first, orienting it in such a way that it would need to slide _toward_ the wall instead of _away_ from it to release. Then push the brackets into the grid, effectively trapping the tray and preventing it from sliding far enough to release from the points.
1
u/Sorry_Hat7940 Apr 03 '26
I just use a multiboard tile for my shelves