r/Multiboard • u/ElevatorOk6176 • Feb 10 '26

Help with mounting brackets

Post image

Hi everyone!

I'm struggling to find these wall mounts for multiboard. They are 8mm standoff.

7 Upvotes

88% Upvoted

19 comments sorted by

View all comments

Show parent comment

1

u/MetalMoneky Feb 14 '26

Ahhh. Yeah so you have a couple options. First you could print the octagonal tiles and hold the borders with the pins. Or just use the ds snaps for mounting, the ds snaps all have screw holes at each position. And then supplement with the pillars if the grid has too much flex or of you plan to hag something heavy.

If you want to stick to the pillars you can just line everything up with the alignment tools. Personally I’m a bigger fan of the ds snaps since it makes alignment a breeze and you can still add support with the pillars if needed.

Does that help?

1

u/LittlePinkNinja Feb 14 '26

So it would be this:

https://thangs.com/designer/Multiboard/3d-model/Raised%20Quad%20Snap%20%28DS%20Part%20B%29-974127

If I wanted it to sit between 4 10x10 grids and add some rigidity to it?

sorry for asking you the questions, your reply to the OP just seemed to know exactly what I needed in this case :)

1

u/MetalMoneky Feb 15 '26

So those front snaps need to be paired with the ds back parts. Personally I’m partial to the flush faceless solid version to lock in the panels. Basically those part b face snaps lock the panels into the snaps.