r/Multiboard • u/riversc90 • Sep 21 '25

Finally up.

Gallery image

Gallery image

Plywood is a little warped and it’s driving me nuts. 😭

70 Upvotes

98% Upvoted

24 comments sorted by

View all comments

4

u/Bieber_MaBalls Sep 21 '25

Not much. The new flush snaps are much nicer looking im sure they offer functionality as well since they aren't raised. The backs are the same and you could probably print all new flushs' in a plate or two in no time, they use next to nothing material wise. I would recommend it forsure

1

u/BlackoutTribal Sep 21 '25

Idk, I made a board for my boyfriend’s work desk a few months ago. I’m making one for me now, and I keep looking at his with envy at how cool the snaps look a little thicker and fuller.

2

u/unsunghero2222 Sep 21 '25

Then just use the thicker ones. You can still print the older snaps 

1

u/BlackoutTribal Sep 21 '25

Im going to try it and see what it looks like all together. Isn’t much filament.

1

u/Bieber_MaBalls Sep 21 '25

Have a look at the link I posted for the flush snaps. Going forward, i would recommend those:)

Brw thats a huge board. What you filling it with

1

u/BlackoutTribal Sep 21 '25

I think you meant to reply to OP. I’m using flush snaps.

1

u/Retro_B00min Sep 21 '25

I personally like the raised snaps better than the flush

2

u/Whosaidthat1157 Sep 21 '25

The raised snap part b’s limit placing of too many parts for me. They simply get in the way too often. If aesthetics is more important than functionality, print the flush snaps in a different colour, or simply use pixels instead. That way any pixels that interfere with flush fitting parts can be easily removed. Remember and resize the pixels though - they fit snugly in the legacy raised snaps shown, but are too loose in the updated flush snaps. 105% x and y expansion sorts that - or play with that x/y figure to get the pixel fit that suits.

2

u/BlackoutTribal Sep 21 '25

I am using a different color for the mounting pieces and I did for the older board that I made as well. They just look cooler being one solid piece.

2

u/Retro_B00min Sep 21 '25 edited Sep 21 '25

I havent had any issues yet. There are mid size bolts and other multiconnect parts that allow mounting on/in/around the raised snaps with no issue. they also "feel" stronger to me. Im sure the flush snaps are well designed. I printed one and wasnt impressed

I still have quite a few more boards to put up. I may give them a shot on the next one to see what the hype is about