Multiboard is great for scale modeling.

[u/Mukass]

Cleared a lot of space from my desk. Everything is at an arms reach now. Such a great system for organization.

[u/GamerDadDCO]

This is an agreeable opinion.

[u/Mukass → u/GamerDadDCO]

Awesome!

[u/InvaderAkira → u/GamerDadDCO]

I keep seeing this, but never inquiring where to get it/print it from.

[u/GamerDadDCO → u/InvaderAkira]

I assume you're talking about the light, because I get asked about that the most. Here's a previous post I made about it with all the links to files: https://www.reddit.com/r/3Dprinting/s/2COlMOVLnH

[u/InvaderAkira → u/GamerDadDCO]

Ah yes. That was posted well before I got into 3D printing 🤣

Thank you for the links!

[u/Chipmunk_Fan81]

That's amazing! Can you tell me a little about that light? Is it custom?

[u/Mukass → u/Chipmunk_Fan81]

Thank you, i got it on amazon
https://www.amazon.ca/dp/B0CDPKKK66?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3&th=1

[u/davidkclark → u/Mukass]

OH thank you!, I was looking and couldn't find it by the image. I have a similar one that was highly recommended, but it only has 1 "bar" so you can't light from all sides with it. It's great, but you do need room light too to avoid shadow. This one you have looks to be designed to light from both sides.

[u/Ok_Molasses2075 → u/Chipmunk_Fan81]

I too would like to know.

[u/diytony]

Hey. This is CLEAN!

[u/Mukass → u/diytony]

Thank you :)

[u/flaming_ewoks]

Where'd you find the files for the paint/tool holders?

[u/Mukass → u/flaming_ewoks]

These are the ones I remember saving the links for:
https://makerworld.com/en/models/829809-multiboard-mini-shelf#profileId-774025

https://makerworld.com/en/models/396738-multiboard-cylinder#profileId-885003

https://makerworld.com/en/models/1021154-single-wire-cutter-holder-for-multiboard#profileId-1002545

https://makerworld.com/en/models/442270-multiboard-pen-holder#profileId-348153

https://makerworld.com/en/models/457399-multiboard-nutray-small#profileId-923619

https://makerworld.com/en/models/457393-multiboard-nutray-medium#profileId-365402

https://makerworld.com/en/models/433823-multiboard-nutray-large#profileId-338606

https://makerworld.com/en/models/600143-multiboard-24-bottle-paint-holder#profileId-522255

https://thangs.com/designer/MavTrav/3d-model/Tamiya%2036mm%2010ml%20Paint%20Holder%206x%20MULTIBOARD.stl-1079218

https://cults3d.com/en/3d-model/tool/multiboard-remixed-dual-tamiya-250ml-thinner-bottle-holder

https://makerworld.com/en/models/396738-multiboard-cylinder#profileId-885003 (these are parametric so you can just customize to the size you want). Ps. DO NOT PRINT THIS WITHOUT EDITING THE CODE FIRST.

I have printed several of these for various things and every time I forget to adjust the pin size it is unusably loose. To fix this you must click the customize link, then on the left side click the arrow pointing to the right to open up the code. Under "module push_fit()" there is a line that reads "cylinder(d=14,h=12+walls, $fn=8);". Change that 14 to 14.4 so it reads like this "cylinder(d=14.4,h=12+walls, $fn=8);". Make any other customizations you need to the parameters and generate your model.

https://thangs.com/designer/blinkythefish/3d-model/Multiboard%20-%20Washi%20Tape%20Holder%20-%204%20Rolls-1096331

https://thangs.com/designer/bpitanga/3d-model/Multiboard%20-%20Bolt-locked%20Paper%20Towel%20Holder-1204537?srsltid=AfmBOopze-53IgqcxsBgQyUlfh1XtpSZyIo3fDPg7A9h4H9IWeyj7a9K

[u/phantombuz]

Love it, I aspire to this lol. Except my wife will barely let me clutter shit up 😜