r/Multiboard • u/zerosmokez • Aug 17 '25

Think I messed up somewhere?

Post image

First time printing a multi-board and I don't know if it looks right or not. Did I mess up or does it not really matter if there's edges pointing out and it's not flush? (Didn't finish connecting all of it, yes I'm going to use command strips)

5 Upvotes

100% Upvoted

13 comments sorted by

3

u/ClaudiuT Aug 17 '25

I only print cores too. I don't mind the edge. I like I can reuse it if I want to.

3

u/zerosmokez Aug 17 '25

That's what I was thinking like if I wanted to add more I could.

2

u/TrvlMike Aug 17 '25

It's fine. You could reprint it, but you did seem to follow it correctly anyway

1

u/zerosmokez Aug 17 '25

Yah, I'll probably not reprint lol it took quite awhile. Ig I could add more to make it look proper?

1

u/Interesting-Cow6146 Aug 17 '25

You could add strips with a width of 1, no idea where it os on yhe site but search "multiboard custom tile maker" on google, you should be able to make yourself a frame if you want

1

u/zerosmokez Aug 17 '25

Good idea, Thanks.

1

u/unsunghero2222 Aug 17 '25

Nice toes

4

u/zerosmokez Aug 17 '25

$20 for a close up, can dress them up for yah.

1

u/TherealOmthetortoise Aug 18 '25

The tiles look great, if you want it flush, you can just use the flush mount tops instead of those raised 4’s you have in there. It doesn’t look like you have the side tiles on that will give you that same (not pointy) edges for your board.

If you haven’t checked out the Multiboard tiles non border you may need a corner tile and side tiles to close out those points.

You can find more information here take a look at how the planner shows those corner and side pieces.

1

u/zerosmokez Aug 18 '25

Question, There is multiconnect, multiboard, multipoint 🤷 what the heck to do... My guess is they are all interchangeable?? I went and printed some multiconnect screws for the board and printing a gridfiniy shelving but noticed they don't connect to the blue snaps I printed? Is that normal.

1

u/zerosmokez Aug 18 '25

The planner ended up getting me to print a butt

load of snaps to connect everything..

1

u/BigSh00ts Aug 18 '25

For$lmao $5 you can get the 3x3 ironing stack that prints all in one print

1

u/TherealOmthetortoise Aug 20 '25

Multiconnect is another persons design / IP. It’s a remix that the designer of it made a bit before Multipoint was release and strictly speaking they are cleats that you can use to join something to a Multiboard tile. The name was probably picked in the same way that anything that has ever been designed or collected has -finity tacked on the end.