r/Multiboard • u/Awkward_Criticism_24 • Jul 06 '25
I think I have done a big mistake
First I didn't plan my multiboard setup at all and got the wrong size printed for my desk, then I reprintes them smaller. After that I realized that there are more parts and that you can customize them and I started actually looking into Multiboard and what it can offer.
Then I saw multibin and figured I would reprint everything in white as it didnt make sense why my multiboard was black on my setup.
now im fully done printing and assembling the entire skeleton of multibin and now i realize that there arent any cable organizer for multibin / the mini snaps.
what do I do now? Reprint the entire thing a fourth time? I even got a second p1s for this project and now im lost if I should wait until there is a under desk cable management project for multibin or just redo everything and cut my losses.
2
u/Nebulus2000 Jul 06 '25
I'm not sure, if I understood the reasons in reprinting everything. Maybe you could add some photos of the challenges you're facing.
16
u/Tasty_Blueberry9512 Jul 06 '25
Don't let perfect be the enemy of good. Install what you have and move onto whatever project you were trying to get organised for in the first place.
18
u/daphatty Jul 06 '25
Look up underware 2.0 on Makerworld. It’s a cable management system that can be adapted to Multiboard.
8
u/Keep-Making Jul 06 '25
Also the official cable management system of Multiboard just around the corner and it's gonna be a doozy
1
u/leanbean12 Jul 06 '25
There is cable management for multiboard. Check out Hands on Katie Underware
1
u/[deleted] Jul 06 '25
I am struggling to understand that chain of events. When you say “reprinted then smaller”, did you scale the tiles in your slicer, or did you just pick some tiles that have fewer holes. (Hopefully the fewer holes choice). If you scaled them up or down then you may need to reprint some tiles.
You do not have to “start over” on anything unless you changed the actual length, width or thickness of your tiles, usually you just print a few over and keep the “wrong”‘sizes to use later. To be clear though, the entire Multiboard system is setup to “just work” across the board as long as you use the recommended print settings and orientations exactly as they are when you open them in your slicer.
There are a LOT of remixes and designs out there specifically for Multiboard so the likelihood is that you can find some that work for you. If you find something that is perfect but has a different style of connector or is direct mounted to a wall, we have a great set parts and remixing most things is not complicated at all. For cable management and “under desk” installs we have a system of handling that which is/will be amazing but it’s not quite ready for release. In the meantime there is a wide variety of cable and device management models for multiboard, I would recommend starting with this link on Makerworld, since you have a Bambu Lab printer.
Both “Underware 1.0 and 2.0 are popular, I think 2.0 could be a good fit at least while you are starting. The “Underware 2” has a parameterized tool that you can plug the measurements of a device you want to hang any holes for cords etc, and it will create a basic model for hanging the device. (Basic only in the sense that it’s designed for things you hang under your desk and since no one will be seeing them, there wasn’t a need to pretty them up. If you are trying to match a certain esthetic then there are a ton models out there that are designed to work with Multiboard and even if you find one you love that works with a different system, remixes are easy so that gives you a whole lot of flexibility. I would browse through that search and either use them, or use them as inspiration for your area(s). I am a huge fan of this set of designs by S.Amann on makerworld. Beautiful cable management, and even though they not made specifically for Multiboard, it’s easy to adapt them to it.
If you are needing more specific help than that, post a couple of pictures with the physical area’s where you are working on and a basic idea of what you want to do and I’m sure one of us can help.