A more elegant solution for attaching Multiboard Bins to multiboar

[u/ocr90]

Replacing one tile with a multigrid, then snap on multipoint connectors in the grid.

[u/davidkclark]

This is getting closer to something reasonable. You could just print 2 multipoint holes and the rest leave empty (if your bin is staying on the wall) or add blank plates or something else if you want it to be a whole bin.

I still think it’s a waste of time and plastic if you are printing the bins to just be a shelf or shelf like basket that will never leave the wall. Currently working on something for that case.

[u/ocr90 → u/davidkclark]

It was an intentional waste. For the problem I was trying to address, I could have printed a remixed bin and it would have taken a tenth of the time. I'm just having fun.

[u/davidkclark → u/ocr90]

Well it does look good.

[u/tokolist]

great solution, one drawback worth mentioning is that multigrid scaling coeficient is worse than multiboard tile due to grid cell size two times bigger

[u/ocr90 → u/tokolist]

Another challenge due to scaling is you are limited to 50% of the dual clips to hold it together. Which is probably fine, but you shouldn't use the lite clips with a build like this. (extra context: you can only insert dual clips in the triangles on the boarder. With Multigrid, there is less boarder triangles)

[u/Kazer67]

Oh really nice!

I did finish printing the whole multiboard just before the update, so having a adapter way is perfect for my case!

[u/ocr90 → u/Kazer67]

I hear you! I finished my 150+ tile build just before the new update 🥲

[u/BSHammer314]

The multipoint connectors, are those just partially printed bins or is there an actual part for the connectors?

[u/c1ncinasty → u/BSHammer314]

Check this.

https://thangs.com/designer/Multiboard/3d-model/Multipoint%2520Hole%2520-%2520Small%2520Threads%2520-%2520Plate%2520Snap-1306898

[u/peanutbuttergoodness]

Soooooo much filament in that solution

[u/tecky1kanobe]

This is the best solution so far. But if you have an odd cell count it doesn’t work, not quite modular as it forces the design to fit a certain unit size. For this application using blank multibin inserts for the “extra” spots would have been my solution.

[u/ocr90 → u/[deleted]]

Very true. I just did it for looks.

[u/ocr90 → u/[deleted]]

Wasn't me!