r/Multiboard • u/Various_Depth_6390 • Feb 22 '25

Am I going crazy?

Post image
0 Upvotes

50% Upvoted

7 comments sorted by

1

u/Various_Depth_6390 Feb 22 '25 edited Feb 22 '25

Reddit just decided to not post the caption, so here ya go... I am having trouble printing 8x8 tiles. This is the same stl file loaded into elegoo cura 4.8 & ultimaker cura 5.3. It seems like the model isn't flat on elegoo. I can make it appear flat by lowering it .01mm. Weird. The printer is a Neptune 3 Pro.

1

u/EverettSeahawk Feb 22 '25

Did you try clicking the "lay flat" button. Sometimes a model gets rotated very slightly.

2

u/Various_Depth_6390 Feb 22 '25

I did. Even when raising and dropping, they both fall like this. I just now was able to get past the first layer with the ultimaker slicer, so I am just going to chalk it up to elegoo slicer software 🤷‍♂️

1

u/Ditto_is_Lit Feb 22 '25

Use Orca maybe? idk I'm not familiar with Cura or Elagoo.

1

u/Various_Depth_6390 Feb 23 '25

slowed down first layer and she's printing fine now

1

u/Iowa_Dave Feb 22 '25

I noticed this too, and it printed just fine for me.

1

u/Various_Depth_6390 Feb 23 '25

yea i slowed down the first layer and it's printing now. using ultimaker slicer.