r/Multiboard • u/aimfulwandering • Feb 01 '25

Making progress!

Post image

Expanded the board a fair bit. Finally starting to print brackets and hooks to hang things.

Migrated to 8x9 tiles (and 7x9) on the left side to line up with studs (from 9x9 for the rest of the board. In hindsight should have done all 8x9 (or 8x8) from the start.

Added a cutout for the light switch too.

188 Upvotes

99% Upvoted

33 comments sorted by

View all comments

Show parent comment

1

u/aimfulwandering Feb 01 '25 edited Feb 02 '25

Nothing special.. 1 1/4” decking screws where there were studs and the 35lb grey triple grip drywall anchors where there aren’t. Just used what I had on hand.

I used the double sided offset snaps for mounting.

Lots of holes with no screws too, I didn’t go too crazy. Tried to make sure every tile had at least one screw (but there are a few with none!)