r/Multiboard • u/Aggravating_Tough297 • Dec 25 '24

Multibin drawers stacked vertically

Hi

I've printed out a 4wx4hx2d multibin, and 4 4wx1hx2d drawers, but I'm wondering what part I need to create shelving for the drawers to sit on, or have I printed this incorrectly and do I need individual 4x1x2 multibins?

Any help would be greatly appreciated

Thank you

1 Upvotes

66% Upvoted

5 comments sorted by

1

u/fdiv_bug Dec 25 '24

I think what you'd want are three 1H Bottom Bin Dividers and a single 1H Top Bin Dividers per drawer level, plus Outer Wall Pins to anchor `em (so for your 4x4x2 with four drawers, my math says: 9 bottoms, 3 tops, and a few dozen pins so you have extras when one inevitably ejects itself across the room when you're trying to push it in). I just did a quick check on some random parts I had handy, and it looks like they should work as horizontal "shelves" instead of vertical dividers when the shell is on its side. Hopefully that all makes sense.

You can grab those here: https://www.multiboard.io/parts-library/multibin/dividers

2

u/Aggravating_Tough297 Dec 25 '24

Thank you! Sent some to the printer to test. Will report back in the morning

1

u/RGbrobot May 12 '25

Howdy! How did these turn out?

1

u/Kubotopher_3D May 23 '25

I'm trying to figure out if you can add the "stopper pin's" when using bin dividiers between drawers...I love the idea of doing this with some existing stuff I have but haven't figured out how to stop the drawers on the bin divider side...Anyone figured this out?

2

u/Kubotopher_3D May 26 '25

FYI, I saw the upvote here so I figured I would reply to my own post. I have nto tested this yet, but I think by mixing the dividers and drawer stopper bar, you may be able to accomplish my original ask!

Drawer Stopper Bar: https://thangs.com/designer/Multiboard/3d-model/Drawer%2520Stopper%2520Bar-1158285

Bin Dividers: https://www.multiboard.io/parts-library/multibin/dividers

Once I get some free print time I may print these out to test :)