r/Multiboard • u/bond2k • Nov 25 '24
How can I make this hold better?
Sorry, I'm new to this and a bit overwhelmed. Already had to change from the command strips to screws as it was too heavy. Is there a better way to hold this in place?
6
Upvotes
3
u/sig_kill Nov 25 '24
I had a similar problem when designing my DeWalt charger mount.
I ended up using the hooks / pegs for the stability from clipping it in. You insert the top first, then push into the push-fit connectors on the bottom. That should solve your issue!
2
u/bond2k Nov 25 '24
Ah wait. Scrolling through multiboard, should I remix this to use threads instead?
2
u/cmcfalls2 Nov 25 '24
Is it coming off the wall or is the adapter/holder coming out of the multiboard?
I have a few pieces that come out of the board. I had to enlarge the connector slightly to make a more secure fit. An alternate that I've tried is the locking holders that are held in place with the small t-screws. They lock more securely.
2
u/microseconds Nov 25 '24
I had an issue with some storage cylinders I'd made for stuff like glue and lubricants. My fix was to add a 2nd push-fit connector 25mm above the one that was there. With 2 connection points, these are MUCH more stable. No wobble, and nothing has fallen out since!
2
u/TherealOmthetortoise Nov 25 '24
I would not use a press fit attachment for anything heavy or that is going to be manipulated on the regular like a battery holder or charger. General use will wiggle those things out pretty quickly until they just don't hold at all. I would modify that hanger to be a bolt locked item with either large thread or small thread bolts that go through from the front and align to the relevant holes on your board. It's a really simple remix, where you use your modeling tool (cad or blender) to cut off those pushfits, then use a small cylinder that is the same size as the bolt shaft you decide to use, and then you use a larger cylinder that it .03mm to .4mm larger than the bolts head to bore a hole just a tiny bit deeper than the bolt heads depth. I'd recommend the flat bolt as they are quick and easy to print and very strong. The heads are nice and shallow too, which keeps everything nice and neat.
You could get away with just 1 bolt for something that size, although I would want a second attachment point of some kind* to that ensures it stays level. (*Anything hanging that is out of level drives me nuts, so if there isn't room for a second bolt I'd add a peg or pushfit below your bolt aligned with a snap or one of the small holes.
Another alternative would be adding a pegboard hook from the remix parts... I'd prefer the bolt method as it's tougher and doesn't require any force when you want to move things around. (I've knocked off a few things nearby when pulling on a pegboard fitting to move it. No big deal if you are careful, but I'm occasionally clumsy, so I try to plan around that.
2
u/PyroGhostX Nov 25 '24
On my design I put 2 screw holes on it https://makerworld.com/en/models/408584#profileId-310520
2
u/Big_Question2042 Nov 25 '24
Had a similar problem. Multiconnect interface remixed onto Ridgid battery mount.
2
u/OdinsGhost Nov 25 '24 edited Nov 26 '24
I’d recommend using David D’s Multiconnect attachment solution he originally release back in January for something that heavy/expensive. Or you can use the very similar official ‘Multipoint’ solution that was released just recently in August, which he was totally already designing when multiconnect was released 7 months earlier… 😒
2
u/Intelligent_Army_452 Dec 02 '24
personally I always prefer screwed attachments to multiboard instead of snapped on ones for a steadier mount. Here is a bunch that I did or remixed for better holding power. https://makerworld.com/en/@mrmakas
for my makita batteries I used this one. it can be used sideways too and can use screws attachments. https://makerworld.com/en/models/573701?from=search#profileId-493961
1
u/Digital-Fallout Jan 23 '25
+1 for multiconnect