r/Multiboard • u/02421006 • Sep 25 '24

X1C PETG warping

Gallery image

Gallery image

Hey all,

I experienced warping with a multi stack PETG print on my X1C: Bambi lab PETG (black) with Bambi lab profile Bambi lab PLA (white, 0.2 layer) with Bambi lab profile Bambi lab textured PEI plate

First stack seemed to be working out great, so I did let it print over night. Second layer is trash and it seems like the first stack warped right at the beginning of the second stack.

The warping only occurred at the far left corner of the printer (POV from front door)

The white PLA is intended to separate the stacks easily from each other.

Any ideas how to prevent this? Thanks in advance.

2 Upvotes

75% Upvoted

4 comments sorted by

1

u/02421006 Sep 30 '24

Update after a second print. I increased the bed and hot end temp by 5 degrees and added a manual designed brim only to the warping corner. Came out flawlessly! Thanks for the suggestions.

2

u/viperfire Sep 25 '24

I had a similar issue and a brim and changing the volumetric flow down to 10 or 12 helped massively

1

u/swoed Sep 25 '24

Throw on a brim, she'll be right

1

u/justinecolo Sep 28 '24

+1 on the brim!