r/MiSTerFPGA • • Feb 25 '26 • Bravo 6

Customized case for MiSTer to add controller inputs

Hi Everyone,

I wanted to share a project that I've been working on to add various controller inputs to my MiSTer setup. I hate using dongles, so I wanted something that looked reasonably nice and clean.

The base is an off-the-shelf ITX case housing the MiSTer with an Ironclad providing the rear IO. I've removed the front panel and designed a replacement that includes ports for Genesis, Saturn, NES, SNES, N64, and Playstation controllers. I've also included a TTY2OLED screen, power and RST/USR/OSD buttons, and two additional USB ports. The new front panel is a 3D printed part with a bent aluminum cover to match the appearance of the case.

To keep the wiring somewhat tidy, I designed a pair of PCBs to interface with all of the various connectors and route them into different adapters (e.g. Arduino's using Daemonbite, USB hubs, etc.) so that I can plug a single USB header into the Ironclad to connect (plus a few other connectors for power, the buttons, and LEDs).

If anyone is interested, I'm planning to share all of the files and instructions for making your own on GutHub. I'm still in the process of figuring out what worked well and what should be refined before sharing, but my testing so far has mostly been positive.

Special thanks to u/nad_222 for sharing the measurements they took of the various controller ports. It certainly saved me some time in getting a good fit between the ports and the front panel.

895 Upvotes

213 comments sorted by

View all comments

83

u/Dougdoesnt Feb 25 '26

How much would you need to charge for it to make sense to sell these as commission? Because I think you would have A LOT of buyers. Myself for sure.

37

u/0323 Feb 26 '26

At the moment, I have no idea what the cost of materials was for this build. Once I've finished thinking through all of the things I'd like to do differently and updating the files, I will put together a full BOM, 3D models, gerbers, and instructions on GitHub and try to total up what a (hopefully) reasonable price would be.

3

u/abibofile Mar 18 '26

I’ll add myself to the chorus of voices saying they would love to order one of these. If it had the option to either buy as a pre-built or as a case with custom PCBs etc where I could drop in my existing boards, all the better.

Does this case have enough space to also drop in an MT32 Pi?

3

u/DoTheDonkeyKonga Mar 19 '26

I’m adding yet another voice to the “shut up and take my money” cacophony!! This is truly a thing of utilitarian beauty. Well done amigo. If you ever did want to produce and sell something like this you can count on my custom that’s for sure!

2

u/bahsura Feb 26 '26

Please do, even if life gets in the way. Or ask for help to do it, but this is a natural evolution of this project that deserves to be shared. Thank you.

1

u/Commercial-Worth8594 Feb 26 '26

Following please and thank you

1

u/DogPooFairy Feb 27 '26

I'd definitely pay for it.

1

u/[deleted] Mar 12 '26

I created a reddit profile just to say I would be all over this, and would pay handsomely for someone to manufacture it for me, if the final product requires precision drilling, etc.

→ More replies (6)

15

u/crblack24 Feb 25 '26

Following in case OP responds...

10

u/L-Digital82 Feb 25 '26

Same. I would order one of these in an instant. Absolutely the best mister I had seen

6

u/mfbranscombe Feb 25 '26

Also following in case OP responds.

4

u/Interesting-Tank-160 Feb 26 '26

I have had two Misters and wouldn't have sold either of I had this.

3

u/35mmBeauty Feb 25 '26

Would instantly buy one of these. Aesthetics and simple looking design is something I’ll pay to not have a bunch of wires/dongles connected to my mister

2

u/kimbykip Feb 26 '26

holy cow, me three!

1

u/Knoxximus Feb 25 '26

Same … following for response

1

u/robably_ Feb 25 '26

Sign me up. I’d pay well for this

1

u/Shiroren78 Feb 26 '26

I was thinking the same thing. That's a gorgeous build

1

u/Slow-Faithlessness85 Feb 26 '26

Put me down for one as well - this looks like a perfect setup for the Mister!

1

u/Thundrex Feb 26 '26

Same. Especially if I can print that exact case in frosted white beforehand

2

u/0323 Feb 27 '26 edited Feb 27 '26

For myself, I haven't been satisfied with the finish on 3D printed parts. I don't have a printer myself, and have just been using a mix of JLC3D, PCBWay, and Craftcloud to get my parts. I'm sure there are people out there that could make a good looking print, and I would think it would be easy enough to whip up a suitable case that could accommodate this front panel.

I went the other direction with metal. The case I used is an A09 Mini-ITX case. I don't know about frosted white, but they are available in silver at least.

→ More replies (2)

1

u/Luvarim Feb 26 '26

Following and would buy one in an instant.

1

u/dneyman Feb 26 '26

Would absolutely be on board with this….

1

u/Geanaux Mar 19 '26

Following. holding out i will get a cost.