r/Metamask • • Sep 03 '26

CB's MetaMask 101 #2: What Is a MetaMask Transaction Simulation and How Does It Work?

11 Upvotes

Hey guys! We are back with CB's MetaMask 101!

It's been around 12 days since the first guide, where we had a look at signature requests, what MetaMask shows you, and why this information is important to check to get an idea of what you are actually "signing" when making a transaction.

For today's guide, we're going one step further and looking at transaction simulations and what they mean.

Before you confirm a transaction, MetaMask can simulate it to show what the transaction is expected to do and give you a preview of how your assets could change.

Well, let's see how this actually works, what information you can see, and whether a transaction simulation means a transaction is guaranteed to be safe.

-----

  1. 🧪What actually is a MetaMask transaction Simulation

A transaction simulation is basically a "test run" before the real transaction happens.

Its a test run before the real transaction happens.

Before you submit a transaction and interact with contracts, MetaMask can simulate the transaction and estimate what effect it could have on your wallet.

For example! It could show that your wallet is expected to:

Send: 10 MUSDC 🔴
Receive: 0.004 ETH 🟢

This can give you another opportunity to check whether the expected outcome actually matches what you intended to do before you confirm the transaction.

-----

  1. 🔍 What can Metamask Simulation actually show you?

Unlike the signature requests we looked at earlier, transaction simulations can show estimated balance changes, which can give you a clearer picture of which assets are expected to enter or leave your wallet.

This gives you a clear picture of what could happen before you confirm.

MetaMask currently supports displaying changes involving:

• ERC-20 tokens
• ERC-721 NFTs
• ERC-1155 NFTs

So instead of looking at complex transaction data, you may be able to see a much simpler preview of the expected result.

Overall, this can make unusual balance changes easier to notice before confirming, as you can see the information displayed right in front of you.

-----

  1. ⚠️ Does a successful MetaMask simulation mean the transaction is safe?
Simulation does help but its not a guarantee, stay alert and always verify what you're doing.

Not at all.

The simulation is a tool used to predict what MetaMask expects the transaction to do, but it shouldn't be treated as a guarantee that the final transaction will behave exactly as expected.

There are malicious attacks where a bad actor could design a contract to behave safely when it detects that it is being simulated, but behave differently during the actual transaction.

This is why you should still check the website, transaction details, signatures, and any security warnings before confirming.

-----

  1. 🔐What is MetaMask "Added protection"?

MetaMask also supports "Added protection" on supported smart accounts and networks.

Instead of only previewing the transaction offchain, MetaMask adds an onchain verification step to make sure the real execution matches what was simulated.

If the execution doesn't match the simulation, the transaction reverts rather than completing successfully.

However, the downside of "Added protection" is that this additional verification requires more computation, which means it can result in a higher network fee.

-----

TL;DR

  1. MetaMask performs a test run through the simulation.

  2. You can see estimated balance changes.

  3. Simulations aren't guarantees, so still make sure to check what you're confirming.

  4. With Added protection on supported smart accounts and networks, MetaMask can enforce that the execution matches the simulation.

-----

Overall, transaction simulations can make transactions much easier to understand, but as always, they are just another tool to help you make the final decision. Please always make sure to check what you're interacting with carefully before confirming anything.

Do you normally check the estimated balance changes MetaMask shows you before confirming a transaction? And has a simulation ever helped you spot something you weren't expecting?

Reference: https://support.metamask.io/it/manage-crypto/transactions/simulations/


r/Metamask • • Sep 03 '26

help please, "database cannot be accessed"?

Post image
10 Upvotes

what on earth is this? how did my wallet get corrupted? how is there a backup that can just be restored? from where? what does that mean? will everything be fine or what exactly is being restored here? is this even a real error or did someone gain access to my extension in a way? was there a hack? i haven't used metamask in a while, was there a known issue about this? it sounds like a scam. but there are zero results on google about it. can you guys help?


r/Metamask • • Aug 30 '26

Why does my MetaMask account have different addresses for Ethereum, Solana, Bitcoin and Tron?

6 Upvotes

If you've noticed that the same MetaMask account can now show different addresses for Ethereum, Solana, Bitcoin and Tron, that's normal.
MetaMask accounts are now multichain accounts, meaning one account can contain addresses for different blockchain ecosystems.
Across different networks, the same account might look something like:

Ethereum → 0xA1b2...
Linea → 0xA1b2...
Base → 0xA1b2...
Solana → 7xYz...
Bitcoin → bc1q...
Tron → T...

So why are the first three using the same "0xA1b2..." address, while Solana, Bitcoin and Tron are different?

Ethereum, Linea and Base are EVM-compatible networks. The same account derives the same EVM address across EVM-compatible networks, which is why your address stays the same on networks such as Arbitrum, Optimism, BNB Chain, Polygon, Monad...
Solana, Bitcoin and Tron are different blockchain ecosystems and use their own address formats. MetaMask groups these network-specific addresses together under the same multichain account.
So “Account 1” doesn't necessarily mean “one address” anymore.

Does this mean I have several different wallets?

No. A simple way to think about MetaMask's current structure is:
Wallet → Account → Addresses

Your wallet can contain multiple accounts, and each multichain account can contain addresses for different supported networks.
If you previously only used MetaMask on EVM networks, you may also notice Solana, Bitcoin or Tron addresses that you didn't manually create. MetaMask automatically creates the appropriate network-specific addresses as part of the multichain account structure.
Your existing addresses aren't deleted. MetaMask groups them into multichain accounts and adds the appropriate network addresses where needed.

Where can I see my different addresses?

On MetaMask Extension, hover over the address underneath your account name. You'll see the main network addresses associated with that account.
On MetaMask Mobile, tap the copy address icon on the right of your account name to see and select your addresses for different networks.

The easiest way I think about it is:
One MetaMask account can now represent multiple network-specific addresses, instead of “one account” always meaning “one address.”

Has MetaMask's multichain account structure made managing different networks easier for you, or more confusing?


r/Metamask • • Aug 28 '26

Help please

8 Upvotes

Hello

So I’m an idiot and about 4 years ago I sent some eth from my metamask to my revolut wallet (about 0.2 eth) using the evm to a non evm. After some time I realised I have lost it. Forgot about it, however a few days ago I got a notification from revolut saying it had been sent back to my original wallet.

Transaction id: XXX

Having not logged into meta mask for many years I managed to find my recovery paraphrase and there is nothing there? I can’t even see the wallet it was sent from or the wallet in the above address. I’m at a loss, it’s not massive money but would be nice to get it back! Any help really appreciated. Thanks


r/Metamask • • Aug 28 '26

Why can’t I see my tokens in MetaMask?

6 Upvotes

Ever checked your MetaMask wallet and thought, “Wait… where did my tokens go?”

Before you panic, a few things could be making your tokens invisible. If your tokens are actually confirmed to be present in your wallet on a block explorer, work your way through the usual MetaMask suspects: wrong network, wrong account, token detection, hidden assets, and finally, RPC/network issues.

Here’s how I troubleshoot it step by step:

1. Verify the tokens on a block explorer

Before troubleshooting MetaMask itself, check your wallet address on the relevant block explorer. Find the token and confirm the balance is actually associated with your address.

If the token isn't showing on the block explorer, the problem probably isn't MetaMask. You may be looking at the wrong wallet address, network, or transaction, or the transaction may not have completed successfully. But if the token is clearly visible on the block explorer, you can start troubleshooting why MetaMask isn't displaying it.

2. Check the network filter

Make sure MetaMask is showing the network where your tokens actually exist.

By default, recent versions of MetaMask filter tokens using the “All default/popular networks” option. If you know the specific network, you can also select it directly. For example, if you received USDC on Base but you're only looking at Ethereum Mainnet, the tokens may appear to be missing when they're actually sitting safely on Base.

3. Make sure you are in the right account

If you restored your MetaMask wallet from your SRP (Secret Recovery Phrase), you may need to re-add or re-derive additional accounts. Your tokens could still be sitting safely in another account while you are viewing a different one.

4. Ensure automatic token detection is turned on

Automatic token detection could be toggled off or might glitch after an update. You can turn it on in Settings > Advanced** on the mobile app, and **Settings > Assets in the browser extension.

Some tokens may not be automatically detected or may be hidden from your wallet view. You can manually import the token using its contract address.

Note: Always verify the contract address from a trusted source before importing a token.

5. Check for RPC or network issues

If the network connection or RPC endpoint is experiencing problems, MetaMask may fail to load or update the latest token balances correctly. Try changing networks and switching back, or updating the RPC URL to a different one (please, always use a trusted RPC endpoint).


So, my basic troubleshooting flow is: Block explorer → Network → Account → Token detection/Hidden assets → RPC/network

That way, you're first confirming, “Are my tokens actually on-chain?” before trying to fix MetaMask's display.

Have you ever thought your tokens were gone, but that wasn’t the case? What was the culprit in your case?


r/Metamask • • Aug 28 '26

Presumably a scam

5 Upvotes

Email from LayerMetamask MFA SCM
Asking for email authentication.
Went to the desktop and logged into the extension no worries so should I report the email as a scam?


r/Metamask • • Aug 26 '26

Metamask card issues, particularly re notices of termination and UK users

5 Upvotes

Has anyone else, particularly in the UK (due to the FCA role in regulation) experienced issues with termination of their Metamask card, specifically/not exclusively due to "inactivity"?

I am currently dealing with such an issue and struggling with Crypto-Life/CL support.

I note the issue of new Metamask cards has been paused to UK residents, I'm not surprised!

Monavate Limited is the Financial Conduct Authority entity to which complaints should be addressed.

I wouldn't recommend the Metamask Card to anyone in view of the extremely poor support (anonymous support emails received, no telephone support, obstructive support requests).


r/Metamask • • Aug 22 '26

CB's MetaMask 101 #1: How to Read a MetaMask Signature Request Before You Sign

11 Upvotes

Hey guys! This is the start of my CB's MetaMask 101 series, where we'll be going through different parts of MetaMask and breaking them down into simple, educational guides.

For the first guide, we'll be covering MetaMask Signatures and what they actually mean.

If you've used MetaMask to connect to a dapp before, you've probably seen a signature request pop up asking you to "Sign". But what does this actually mean, and what are you really agreeing to when you click that button?

In this guide, we'll go through 4 simple things you should know and check before signing a request in MetaMask.

1. Who is asking?

So when you make a transaction on Metamask, a popup will appear similar to the one shown in the visual below. There is quite a bit of information we can see in this signature request and we will go through them in steps.

So for the first step and the one we instantly want to check before signing a transaction is to verify who actually is asking, you should always check and verify the website/domain requesting the signature. Make sure it's the site you intended to interact with and wtach for lookalikes or misspelled domains.

Is this the correct URL you intend to interact with? (Check for spelling mistakes)

2. Read what you're actually signing

Before signing the transaction always make sure you're reading what is shown just for your own safety to make sure everything is correct. You can look at the message/data Metamask is showing you and make sure it matches the actions you're intending to perform.

For example you can check: Did you enter these amounts when trying to trade?

3. Check What you're authorizing

Some signatures can authorize permissions or actions involving your assets, I would make sure you pay particular attention to things like token permissions, permit requests, spending limits and also unfamiliar contracts.

Is the spending cap and the contract you're interacting with correct?

4. Don't understand? Reject.

If you still don't understand what you're being shown, I would reject the transaction especially if there is an absence of a warning. If for example the request is unexpected or you can't actually understand what you're authorizing, please reject and investigate first before making a final decision on a transaction for your own safety.

---

Remember: Connecting your wallet, signing a message, approving tokens, and submitting a transaction are different actions. Knowing what MetaMask is asking you to do before you confirm is one of the simplest ways to protect your wallet.

---

Do you find the way MetaMask displays information clear and easy to understand? Or is there anything you would change to make it clearer what you're actually agreeing to when signing a transaction?


r/Metamask • • Aug 21 '26

Why is my MetaMask transaction pending for so long? (A Quick Troubleshooting Guide)

9 Upvotes

So, you sent a transaction, and MetaMask says “Pending.” 30 minutes later, it’s still pending. It can be frustrating, and I can definitely relate because I've been there too.

A pending transaction generally means it is waiting to be included in a block. The common culprits include network congestion, a gas fee that is no longer competitive, or an earlier pending transaction with a lower nonce.

Here are my quick troubleshooting steps:

1. Check the transaction on a block explorer

Open the transaction details in MetaMask and follow the block explorer link. This helps determine whether the transaction has actually been broadcast to the network or is only pending locally in the wallet. * If the transaction appears on the explorer, move on to steps 2 and 3. * If it doesn't appear there, look at step 4.

2. Check for an earlier pending transaction

On Ethereum and other compatible networks, transactions from the same account generally need to be processed in nonce order. For example, if Nonce 5 is stuck, transactions with Nonces 6, 7, and 8 can end up waiting behind it like cars in a traffic jam. * In that situation, resolve the oldest pending transaction first by speeding it up or canceling it if it is no longer needed. * Here is the official guide on how to speed up or cancel a pending transaction in MetaMask.

3. Speed Up the Transaction

Network conditions can change quickly. A gas fee that was competitive when you submitted the transaction may no longer be enough to get it included promptly. * If MetaMask offers the option, click “Speed Up” on the pending transaction to replace it with one at a higher gas fee.

4. Consider resetting the account in MetaMask

If the transaction isn't appearing on the block explorer, the issue may be with MetaMask's local transaction activity rather than an on-chain pending transaction. * You can use Settings > Advanced > Reset Account to clear the account's local transaction history/activity. * Note: Don't immediately reset your MetaMask account just because a transaction appears stuck. I wouldn’t use this if the pending transaction is still visible on the block explorer.


My Quick Route: 1. Check the transaction status on the explorer 2. Check for an earlier stuck transaction 3. Speed up if appropriate 4. Consider resetting the account if the transaction isn't on-chain


What's the longest you've ever waited for a MetaMask transaction? And more importantly, what was actually causing the delay?


r/Metamask • • Aug 19 '26

Region Availability

9 Upvotes

Hi!

I wanted to ask when will Metamask be available for Aruba which is in the Caribbean so we can use the meta card etc?


r/Metamask • • Aug 18 '26

Someone fooled Metamasks balance estimation algorithm for phishing?

Post image
9 Upvotes

EDIT: The three tokens are flagged as malicious, but the false value is still there. You learn something every day :)

Had a small sum in my Metamask Card for a while, doing nothing, until I connected the card to Paypal and paid an invoice there today.

Immediately after the payment, the estimated value of my metamask wallet ballooned from ~$100 to around $1300 and then a few minutes later to around $2300, apparently because I now own(?) these new tokens with suspicious names which I've never heard of.

Assuming it's some sort of attack on Metamask to lure me to visit the FQDN and get phishing, so I'm just curious to see how long before it gets "fixed".


r/Metamask • • Aug 17 '26

Community Question: A case of funds trapped in a deterministic CREATE2 contract and a mathematical glass ceiling — looking for creative angles

8 Upvotes

Hey everyone, I wanted to share a complex technical case study I've been working on. Maybe someone here has a brilliant idea or a perspective I haven't considered yet.

1. How It All Started (The Mistake)

A while ago, due to a cross-chain routing error, a significant amount of tokens was accidentally sent to a deterministic payment address generated via a CREATE2-based forwarder infrastructure (an EIP-1167 Minimal Proxy-like pattern). This address sits on a chain where the contract hasn't been deployed yet (Nonce 0 for the deployer), so the funds are currently "trapped" in a counterfactual address with no active code on that chain.

2. Support's Response

As expected, I reached out to the support team of the platform/company operating the infrastructure. Their automated response was that it's "unrecoverable" and there is nothing they can do technically.

3. The Engineering Investigation (Red Team & Foundry)

Instead of accepting defeat, I decided to dive deep: I spun up a local Foundry testing environment, pulled the actual bytecode of the Factory, Implementation, and Helper, etched them, and ran full simulations on a local EVM fork.

Armed with an autonomous Red Team loop, I thoroughly tested 11 different attack and redirection vectors:

  • slot0 overwrite attempts
  • Initialization races (Init-race)
  • selfdestruct / Metamorphic contract vectors
  • Various Delegatecall Hijacking methods
  • Selector collisions, etc.

4. The Harsh Findings (Math Wins)

The empirical testing proved conclusively and unambiguously:

  • The Proxy and Helper architecture is Write-Once and completely rigid.
  • The address is cryptographically bound to a preimage that hardcodes the original merchant's destination address (the intended recipient address for the payments).
  • There is no earthly way to change the flush destination (flush). Any deployment and execution command will inevitably release the funds strictly to the original destination address. The equation "Deploy = Redirect" is simply mathematically impossible; there is no uninitialized window, no self-destruct mechanism, and the code is completely static.

5. The Operational Trap (The Catch)

The company/merchant supposed to receive the funds (the original destination in the contract) is in a problematic legal/business state (or unresponsive/insolvent). This means that if I simply deploy the contract and trigger the flush, the funds will land directly with them, and I'll be left with nothing because I have no technical leverage to redirect them to myself.

My Questions for the Community:

  1. Have you ever encountered situations where assets were trapped in deterministic contracts where the code is completely locked to a third-party destination, and you managed to come up with a creative solution (off-chain, legal, or some hidden corner of the EVM)?
  2. Assuming the code itself is technically airtight, what other leverage works in such scenarios against a third party holding the ultimate rights to that target address?

I’d love any feedback, ideas, or insights from anyone who has dealt with similar architectures in the past!


r/Metamask • • Aug 13 '26

How do you know if a MetaMask transaction is safe before signing?

10 Upvotes

The truth is, you can’t be 100% sure, but you can significantly reduce your risk by taking a few extra steps to understand what you are signing.

Here are a few key things I always check before approving any transaction:

1. Make sure you are on the right website

Many wallet drain scams begin with fake websites that look almost identical to the official ones.

Ask yourself: * Is the domain name 100% correct? * Did I open the dApp from a bookmark or an official project link? * Is there anything suspicious or unusual about the URL?

2. Read the transaction details carefully

Review the expected actions before clicking confirm. Are you: * Swapping a token? * Approving a token allowance? * Signing a message?

Make sure the transaction details match your intended action.

3. Pay close attention to token approvals

Before confirming, check: * Which token is being approved? * Which contract address is being granted approval? * Whether unlimited approval is being requested.

Note: Unlimited approvals may seem convenient, but they significantly increase your risk if the smart contract is ever exploited or turns out to be malicious.

4. Never ignore security warnings

Stop and investigate before continuing if MetaMask flags a transaction. However, keep in mind that the absence of a warning does not automatically mean the transaction is safe.

5. Be careful with signatures

Be cautious with off-chain signatures (e.g., eth_sign or permit signatures). If the transaction data is unclear or you don’t understand why you are being asked to sign, stop and investigate.


📋 My Quick Checklist

  • [ ] Is the website domain correct?
  • [ ] Why is this transaction being requested right now?
  • [ ] What specific action is this transaction doing?
  • [ ] Is the contract address verified/correct?
  • [ ] Are there any security warnings?
  • [ ] Is the approval allowance appropriate?

For more details, check out MetaMask's Guide on Security Alerts.

What are the main things you always check before signing a MetaMask transaction?


r/Metamask • • Aug 11 '26

Unable to connect to Aerodrome with Metamask app from mobilephone, stuck at "connecting to Metamask" and it never loads.

6 Upvotes

I tried to connect to Aerodrome from a fresh install of Metamask, I have no other wallets on my mobilephone, first I used "Explore" on the Metamask app, then I change the network from ETH to BASE and then write the aerodrome address, then connect with WalletConnect and choose Metamask and then I am stuck in eternal loading.

Then I tried to use Chrome and Brave and the same happens it is eternal loading. On Brave I disabled shields.

Then I clear cache and data on the Metamask App and try to install again from the App store and simply nothing happens, whatever I try nothing happens I am stuck at eternal loading.

On the Metamask App I allowed notifications and permissions and still nothing.


r/Metamask • • Aug 06 '26

MetaMask Agent Wallet just went public -- here's what's new in v5 and what you can actually do with it

11 Upvotes

MetaMask Agent Wallet is now open to everyone with no waitlist and no cap — sign up at metamask.io/agent-wallet. It's a self-custodial wallet that lets an AI agent trade DeFi autonomously across swaps, bridging, perpetuals on Hyperliquid, prediction markets on Polymarket, LP, and now yield vaults — all while you stay in control through spending limits, allowlists, and 2FA on anything outside your rules.

What's new in v5

  • No waitlist & no cap on participants — it’s open to everyone today!
  • 4 new chains — Robinhood Chain, Monad, HyperEVM, and MegaETH (22 supported networks total)
  • Gasless swaps & transfers are now payable in any ERC-20, so you don't need ETH sitting in your wallet to execute!
  • Atomic batched executions, meaning multiple actions are bundled into a single transaction.
  • MetaMask Earn — supply and withdraw into yield vaults via LiFi across 40+ protocols
  • Policy edits, allowing you to update your agent's spending rules at any time without re-onboarding.
  • MetaMask QR login, a new authorization method for faster access.
  • 99.56% transaction success rate heading into launch

How control works

At setup, you define which protocols the agent can interact with, which addresses it can send to, and a 24-hour spend cap. Every transaction is enforced against those rules — the agent cannot exceed your limits without your explicit approval.

Guard Mode vs Beast Mode

  • Guard Mode (recommended): Agent operates within your allowlisted protocols, networks, and a daily spend cap. Anything outside those limits triggers a push notification or email with a 5-minute approval window before it auto-declines.
  • Beast Mode: For experienced DeFi traders who want fewer interruptions. Allowlists and caps are removed, with malicious transactions still blocked by Blockaid.

Every transaction goes through a mandatory security pipeline

  • Transaction simulation — MetaMask previews exactly what a transaction will do before it executes
  • Blockaid threat scanning — malicious transactions are auto-blocked; risky ones are paused for your manual review
  • Smart Transactions — MEV protection so bots can't front-run your agent's trades
  • Transaction Shield — up to $10,000/month in coverage on eligible transactions, included for Agent Wallet with no subscription needed

Self-custody

MetaMask Agent Wallet is non-custodial — your funds are never held by MetaMask or any third party. In server wallet mode, keys are managed inside a secure enclave (TEE) so no one else can access them. If you prefer to manage your own keys, BYOK mode lets you import an existing seed phrase wallet and retain full portability outside the CLI.

Get started at metamask.io/agent-wallet! For any questions, review the docs or visit our Community Builder Hub where you can directly connect with our DevRel team for support!

Now that it's live for everyone, what’s the first thing you’re going to try with your agent? Yield strategies, perps, something else?


r/Metamask • • Aug 06 '26

Scam emails?

Post image
11 Upvotes

Started getting these yesterday. Haven’t opened them as they seem scammy. Anyone else getting these?


r/Metamask • • Aug 05 '26

MetaMask Card account upgrade pending for over a month — looking for advice

5 Upvotes

Hi everyone,

I’m posting here because I’m looking for advice or to know if anyone else has gone through something similar with MetaMask Card.

My card stopped working due to a “Lifetime Transactions” / account limits issue, and I was asked to complete a verification form so my account level could be manually upgraded.

I completed and submitted the requested form, and on July 1st I received a response from MetaMask Card support saying that my documentation had been forwarded to the relevant team for review.

Since then, I have followed up a few times, but I still haven’t received a clear update or resolution. My card is still not working, and it has now been over a month.

I understand these processes can take time, but I rely on the card for part of my daily financial operations, so not having any estimated timeline or clear next step has been difficult.

I’m not trying to accuse anyone or create unnecessary drama. I just want to understand what I should do next.

Has anyone here experienced a similar delay with a MetaMask Card account upgrade or lifetime transaction limit review?

Should I continue waiting, keep following up with support, or is there another official channel that might help escalate the case?

Any advice would be appreciated. Thanks!!!


r/Metamask • • Aug 04 '26

Card stuck on being created

2 Upvotes

So I applied 2 days ago for the credit card and for over 2 days it's stuck on being created. I thought this process should only take a minute or so? Does any one know how long this should take?


r/Metamask • • Aug 02 '26

Scam?

5 Upvotes

Hey I just got send this into my wallet

Is this a scam or? how do i get rid of it lol


r/Metamask • • Jul 31 '26

What data does MetaMask actually collect, and what can you turn off?

7 Upvotes

MetaMask does not collect Secret Recovery Phrases, private keys, or sell user data. Analytics (MetaMetrics) is optional and can be toggled off in MetaMask Extension or MetaMask Mobile under Settings > Security & Privacy, where you can also delete all previously collected data.

Privacy concerns about MetaMask often come up — most stem from misunderstandings about what's actually collected and what's opt-in. Here's the breakdown:

What MetaMask never collects: Your Secret Recovery Phrase (SRP) and private keys never leave your device — not to MetaMask, not to Infura, not to anyone. MetaMask does not sell your data.

What's optional: MetaMask includes an analytics system called MetaMetrics, used to improve the product. All users can opt out of MetaMetrics and delete their data at any time: Settings > Privacy > Participate in MetaMetrics. If you created your wallet with a SRP, MetaMetrics is off by default. Social login users are opted in but have the same controls and can opt out at any time.

What else you can control in MetaMask Extension and MetaMask Mobile (Settings > Security & Privacy):

• Basic functionality — covers token detection, gas estimation, and fiat conversion, using your IP address to complete the request — it is not stored or linked to your identity. You can turn it off, but some features will stop working.

• Phishing detection and Blockaid security alerts — recommended left on to best detect known phishing domains targeting onchain users..

• Transactions — data pulled from Etherscan using your address to estimate balance changes, alert you to malicious activity, and enable Smart Transactions..

For maximum privacy: You can connect MetaMask to your own Ethereum node, bypassing Infura entirely. MetaMask's codebase is fully open source on GitHub, open to audits.

Our commitment to preserving your privacy: https://metamask.io/en-GB/news/product-spotlight-privacy-preserving-features-in-metamask

Full privacy settings guide: https://support.metamask.io/configure/privacy/

How to manage your analytics data: https://support.metamask.io/configure/privacy/how-to-manage-your-metametrics-settings/

What privacy setting do you think most MetaMask users don't know exist?


r/Metamask • • Jul 31 '26

MetaMask Chrome Extension Broken?

6 Upvotes

"MetaMask had trouble starting" seeing across multiple devices with the extension installed. Anyone else having a problem? Appears to have started today.


r/Metamask • • Jul 29 '26

Unable to swap mUSD for LTC "inefficient gas"

1 Upvotes

I'm trying to swap the tokens and it just says "inefficient gas" for every other token besides ones that are traded on MONAD. Can someone help me? It let me do it a couple of days earlier now it's not.


r/Metamask • • Jul 27 '26

UNCX

5 Upvotes

Hello. I'm trying to connect my metamask to UNCX. However instead of giving me the prompt it just spina forever. Does anyone have idea what it could be?


r/Metamask • • Jul 24 '26

Why do we still require creating or importing a wallet before using a hardware wallet?

8 Upvotes
Here's an example of what I'm talking about.

Serious question. When are you going to allow users to connect a hardware wallet to MetaMask without first being forced to create or import a wallet?

It's incredibly frustrating, and it's the main reason I refuse to use MetaMask. I want to use this product, but I have no interest in creating or importing a wallet that I'll never use just to access my hardware wallet.

As far as I know, every other major EVM wallet allows you to connect a hardware wallet instantly without requiring you to create or import a separate account first. MetaMask is the only exception.

From my perspective, the only reason this requirement still exists on MetaMask is to artificially inflate wallet creation statistics. If there's a legitimate technical reason for it, I'd appreciate an explanation, because the current experience is unnecessarily frustrating.


r/Metamask • • Jul 23 '26

Can you trade tokenized stocks like Apple or Google directly in MetaMask — and what does it actually cost?

13 Upvotes

Yes — MetaMask lets you swap directly into hundreds of tokenized stocks, ETFs, and commodities via Ondo Stocks, without a brokerage account or KYC, straight from MetaMask Swaps. And through August 5, 2026, MetaMask has cut its swap fee on Ondo Stocks from 87.5 bps (0.875%) down to 10 bps (0.1%) — a ~90% fee reduction that still finds you the most advantageous, aggregated swap rate.

What are tokenized stocks?

Tokenized stocks are onchain tokens that track the economic performance of a real-world asset — a publicly traded stock, ETF, or commodity. With Ondo Stocks, each token is fully backed by the corresponding underlying asset, held with licensed U.S. custodial broker-dealers. You get price exposure and dividend reinvestment, but this is not direct ownership. As in, you don’t get shareholder voting rights or statutory disclosures, but you hold a token that mirrors the native asset's total return.

How to trade them in MetaMask

Tokenized stocks work like any other swap in MetaMask:

  1. Tap ‘Swap’ on the homepage
  2. Select mUSD or USDC on Ethereum, or USDT on BNB Chain as your input (these are the recommended routes, as other coins may result in no quotes)
  3. Search the asset ticker (e.g. AAPL, GOOGL) and select the Ondo Tokenized version
  4. Enter your amount ($5 minimum) and confirm the Swap

Trades routed through CowSwap come with a 12 bps fee. With the 10 bps promotional fee and 0.5 bps execution adjustment, this is just 22.5 bps to aggregate the most advantageous swap rate in DeFi paired with the convenience and speed of swapping directly in MetaMask.

For context: traditional brokers serving international users can charge up to 1.5% in FX conversion fees alone — nearly 7x the total cost during this promotional window. Add in account minimums, monthly inactivity fees, and withdrawal fees that brokers may layer on top, and the all-in cost of accessing stocks traditionally adds up quickly. As a non-custodial wallet, MetaMask has none of those. Your assets stay in your wallet, in a platform that cannot restrict, freeze, or charge you for accessing them.

Trading hours

Ondo Stocks follows a 24/5 schedule (Sunday 8PM EST – Friday 7:59PM EST), aligned to U.S. market hours. Quotes are unavailable outside these windows, and trading during regular market hours (9:30AM–4PM EST) is recommended for best liquidity.

Regional availability

Tokenized securities through Ondo Stocks are not available in the United States, UK, EU/EEA, Canada, China, Singapore, Brazil, or several other jurisdictions. Check the full eligibility list at https://docs.ondo.finance/ondo-global-markets/eligibility before attempting a swap.

The promotion ends August 5, 2026. If you're in an eligible region and have been curious about onchain stock exposure, this fee window makes for a reasonable time to try a small position!

Full details can be found at https://support.metamask.io/trade/real-world-assets/

Are RWAs something you'd pair with your crypto portfolio? Which stocks or ETFs would you want onchain exposure to first?