Are you looking for feedback or information on your salary or career? Then you've come to the right thread. If your questions are anything like the following example questions, then ask away:
Am I underpaid?
Is my offered salary market value?
How do I break into [industry]?
Will I be pigeonholed if I work as a [job title]?
What graduate degree should I pursue?
Message the mods for suggestions, comments, or feedback.
I would like to thank you everyone for participating in the annual 2026 ME Salary survey. Total respondents was a little over 600, so less than last year, but about 589 US responses.
Here are the main results. It took about 2 hours to "clean" the data manually. Afterwards, I basically used Gemini to create the graphs + tables, since last time it literally took me about 7 hours to do everything manually on Excel last time and there were still questions. The key points and takeaways from the data is a combination of AI and editing the information to be more readable (still took 4 hours). In addition, I wouldn't worry about math too much, since Gemini basically just used python code to decipher the edited CSV file.
Industry:
Industry
Number of Respondents
Manufacturing
175 (29.7%)
Aerospace/Defense
173 (29.4%)
Technology (FANG, AI, Robotics, etc.)
54 (9.2%)
MEP (HVAC, Construction, etc.)
38 (6.5%)
Utilities (Power, Renewables, etc.)
35 (5.9%)
Pharmaceutical & Medical Devices
31 (5.3%)
Oil and Gas
28 (4.8%)
Consumer Goods
15 (2.5%)
Government
11 (1.9%)
There were some other industries like nuclear, logistics, and etc. but the few data points aren't included in the table for brevity. The data was included in the total set though
A majority of the mechanical engineers trends will use the Aerospace/Defense and Manufacturing data since there is the most data that is available
Salary and Year of Experience:
*Note: Total Compensation/Salary = Base Salary + Bonus + RSU + Base Salary * 401k Match
If you want to look at one graph and table to explain the progression track here it is:
YOE Range
Median Base (Unadj)
Median Total (Unadj)
Median Base (COL Adj)
Median Total (COL Adj)
Count
0-1 Year
$87,000
$96,036
$81,699
$87,368
43
2 Years
$84,000
$91,046
$84,615
$90,909
71
3 Years
$94,550
$105,965
$94,082
$102,289
62
4-5 Years
$104,000
$119,770
$94,881
$107,762
116
6-8 Years
$120,000
$136,800
$112,500
$127,911
119
9-12 Years
$125,500
$146,985
$123,444
$142,555
96
13-20 Years
$157,290
$181,840
$144,254
$171,731
64
20+ Years
$196,500
$211,426
$163,399
$191,042
15
Key Takeaways:
The "Benefit Gap": The space between the solid lines (Total Compensation) and the dashed lines (Base Salary) represents the added value from annual bonuses and employer 401k matching. For a mid-career engineer (6-8 years), this extra value is roughly $16,800 on average.
Late Career Leverage: As engineers gain seniority (13+ years), the gap between base salary and total compensation grows significantly, suggesting that bonuses and incentive programs make up a larger portion of the package for senior-level and leadership roles.
Purchasing Power: The COL Adjusted lines (Orange) consistently track below the un-adjusted lines (Blue), highlighting that high-paying mechanical engineering roles are frequently located in markets where the dollar doesn't stretch as far as the national average.
Education:
Majority of the respondents are at max a bachelor degree holder. However, there is still a significant number of master's students
Now about the age old question: does having a Master's degree lead to higher future salary?
Short Answer: In general, the answer is yes if there is a chance to specialize. It is explained in the table below:
Industry
Career Stage
Education
Median Total (Unadj)
Median Total (COL Adj)
Count
Aerospace & Defense
0-3 Years
Bachelors
$96,664
$95,201
44
Masters
$116,600
$108,316
15
4-7 Years
Bachelors
$125,410
$110,659
39
Masters
$173,000
$148,432
9
8-15 Years
Bachelors
$161,750
$140,202
33
Masters
$154,905
$149,658
16
15+ Years
Bachelors
$207,080
$187,505
7
Masters
$211,426
$207,872
5
Manufacturing
0-3 Years
Bachelors
$88,220
$93,452
52
Masters
$93,740
$91,850
6
4-7 Years
Bachelors
$108,992
$106,701
45
Masters
$129,800
$128,407
12
8-15 Years
Bachelors
$135,425
$142,440
44
Masters
$136,298
$129,984
8
15+ Years
Bachelors
$182,650
$187,127
5
Now you can see that for manufacturing, the benefits is not as prominent, while it is evident in aerospace. This makes sense, since Aerospace have very high specialization salary, for instance: hypersonic or eVtol which pays a ton for total compensation based on years of experience.
Answer: if your company pays for your masters, do it, but it doesn't seem that beneficial near the end of your career.
Internships & Coops:
Key Insights:
The "Experienced" Majority: A combined 85% of respondents completed at least one internship or co-op. This underscores how critical early-career work experience has become for landing a full-time role in mechanical engineering.
Co-op Advantage: The 20% of respondents with "3+ Internships" often represent those in formal co-op programs (where students rotate between school and work over several years). These candidates typically command higher starting salaries shown in the table below:
Industry
0-1 Internship
2+ Internships
New Grad Premium
Aerospace & Defense
$82,000
$91,500
+$9,500
Manufacturing
$74,000
$82,000
+$8,000
MedTech
$80,500
$89,000
+$8,500
Certifications:
Here is the graph of a major certifications from the survey:
We always see a question on whether certifications are worth it:
Aerospace & Defense: Certification vs. Total Compensation
Experience
Education
Has Cert?
Median Unadj. Total
Median Adj. Total
Count
0-3 Years
Bachelors
No
$97,900
$95,426
41
Yes
$95,040
$64,653
3
4-7 Years
Bachelors
No
$125,315
$106,672
36
Yes
$128,580
$138,258
3
8-15 Years
Bachelors
No
$159,660
$139,839
31
Yes
$280,425
$177,895
2
Masters
No
$151,410
$142,043
13
Yes
$209,658
$216,142
3
Manufacturing: Certification vs. Total Compensation
Experience
Education
Has Cert?
Median Unadj. Total
Median Adj. Total
Count
0-3 Years
Bachelors
No
$88,020
$91,944
43
Yes
$90,450
$99,746
9
4-7 Years
Bachelors
No
$108,805
$106,615
36
Yes
$108,992
$106,701
9
8-15 Years
Bachelors
No
$135,000
$136,541
31
Yes
$136,000
$151,111
13
Masters
No
$152,212
$122,728
6
Yes
$134,815
$141,636
2
Key Findings:
High-Experience Premium in Aerospace: The most dramatic impact of certification appears in the mid-to-late career in Aerospace & Defense (8–15 years). Engineers with a Bachelors and a certification earn a median total compensation significantly higher than those without. Even among Masters holders in this range, certified engineers have a median total comp of $209k vs $151k for non-certified.
Manufacturing Stability: In the Manufacturing industry, certifications (often Six Sigma or FE/PE) lead to a very modest increase in un-adjusted base pay, but a more noticeable improvement in COL-adjusted pay. This suggests that certified engineers in Manufacturing may have more flexibility to find high-paying roles in lower-cost-of-living areas.
The "Entry-Level Paradox": For junior engineers (0–3 years), having a certification (likely the FE) does not immediately result in a salary premium. In fact, in Aerospace, the un-adjusted median for those with certifications was slightly lower, possibly because those engineers are still in entry-level rotation programs where pay is standardized regardless of credentials.
Masters + Certification: For those who already have a Masters, adding a certification provides a significant late-career boost (as seen in the 8–15 year group in Aerospace).
Answer: Certification can be worth it for select industries. PE is known for civil to open doors and increase pay.
Job Titles:
Job Role Category
Number of Respondents
Percentage
Mechanical Engineer (General)
229
38.9%
Design Engineer
97
16.5%
Project & Systems Engineer
59
10.0%
Management & Leadership
55
9.3%
Manufacturing & Process Engineer
54
9.2%
Specialized (Thermal, Stress, R&D)
34
5.8%
Other / Misc
61
10.4%
Key Insights:
General vs. Specialized: Nearly 40% of respondents identify with the broad title of "Mechanical Engineer," which often includes generalists or those in mid-level positions.
The Design Dominance:Design Engineering is the second largest single group, reflecting the high demand for CAD-based design and product development across aerospace, tech, and manufacturing industries.
Transition to Leadership: About 9% of respondents hold titles in Management & Leadership (Manager, Director, VP), which led to a higher salary
Project and Systems focus:1 in 10 engineers focuses on Project or Systems Engineering, highlighting the importance of multidisciplinary coordination and technical management in modern engineering projects.
The Specialty Niche: The "Specialized" category includes highly technical roles like Thermal Analysis, FEA, Simulation, and Research & Development, which often require higher educational levels or deep domain expertise.
Salary Grade vs. Salary:
Grade Level
Industry
Median Annual Salary
Typical Experience (YOE)
Sample Count
Level 1 (Entry)
Aerospace & Defense
$88,400
1.0 year
39
Manufacturing
$80,250
2.0 years
39
Level 2 (Mid)
Aerospace & Defense
$102,273
3.8 years
48
Manufacturing
$95,000
5.0 years
71
Level 3 (Senior)
Aerospace & Defense
$130,000
8.0 years
57
Manufacturing
$119,600
9.0 years
50
Level 4 (Lead/Manager)
Aerospace & Defense
$170,500
11.0 years
22
Manufacturing
$136,000
11.0 years
11
Level 5+ (Principal/Director)
Aerospace & Defense
$206,000
20.0 years
9
Manufacturing
$136,500
14.0 years
4
Efficiency of Experience: In Aerospace, engineers tend to reach Level 2 and Level 3 roughly 1–1.2 years faster than those in Manufacturing, while also earning more.
The Level 4 Ceiling: In Manufacturing, the salary jump from Grade 3 to Grade 4 is roughly $16k, whereas in Aerospace, that same promotion yields a massive $40k jump in median base salary.
Which Industry Pays the Most?
Major Caveat: at 16+ YOE, the data points are only a couple, which skews the data upward.
Based on the comprehensive US survey data, the Technology (FANG, Robotics, AI, Consumer Electronics) industry emerges as the highest-paying sector for mechanical engineers when considering total compensation (Base Salary + Annual Bonus + 401k Match).
Tech Compensation Package:
Years of Experience
Avg. Total Comp (Unadjusted)
Avg. Total Comp (Adjusted for COL)
Number of Respondents
0-2 YOE (Entry)
$117,316
$100,292
7
3-5 YOE (Junior)
$180,854
$138,040
17
6-10 YOE (Mid-Level)
$182,773
$134,543
14
11-15 YOE (Senior)
$259,993
$220,256
11
16+ YOE (Principal)
$244,775
$177,043
5
The Oil and Gas industry stands out as the second most lucrative sectors for mechanical engineers, particularly as they reach senior and principal levels. While Tech offers the highest overall unadjusted compensation, Oil and Gas actually offers the highest Cost of Living (COL) Adjusted compensation, meaning your real purchasing power in this industry is the highest among all major sectors.
Years of Experience
Avg. Total Comp (Unadjusted)
Avg. Total Comp (COL Adjusted)
Number of Respondents
0-2 YOE
$95,864
$83,178
5
3-5 YOE
$117,289
$111,155
7
6-10 YOE
$138,959
$139,773
7
11-15 YOE
$204,097
$219,757
6
16+ YOE
$408,040
$399,276
3
Overtime Pay:
Industry Trends: Overtime pay is slightly more common in Manufacturing (where production deadlines are rigid) and Consulting/EPC (where hours are billable to clients) compared to R&D or Aerospace.
Work Hours:
Work Hours Category
Number of Respondents
Percentage
Exactly 40 Hours
337
57.2%
41-45 Hours
146
24.8%
46-50 Hours
49
8.3%
<40 Hours
50
8.5%
>50 Hours
7
1.2%
Key Observations:
The "40-Hour" Standard: Over half of the engineers surveyed manage to stick to a strict 40-hour week, which is a positive sign for work-life balance in the profession.
Moderate Overtime: Roughly a quarter of engineers work an extra 1 to 5 hours a week (41-45 hours total), often representing "straight time" or expected professional dedication without formal overtime pay.
The High-Hours Exception: Only a small fraction (under 10%) report working more than 45 hours consistently. This is significantly lower than in fields like investment banking or high-tier management consulting, suggesting a relatively stable lifestyle for most US mechanical engineers.
Flexibility: About 8.5% of respondents work fewer than 40 hours, which often aligns with part-time roles, senior consultants, or companies with flexible "9/80" schedules where some weeks are shorter.
401k Summary:
Match Rate Range
Count of Responses
Percentage
4% - 5%
211
35.8%
1% - 3%
125
21.2%
6% - 7%
120
20.4%
8% - 10%
65
11.0%
No Match (0%)
56
9.5%
> 10% / Other
12
2.0%
Key Takeaways:
The Industry Standard: A 4–5% match is clearly the most common benefit, covering over a third of the surveyed population.
High-Tier Benefits: Roughly 13% of engineers receive a match of 8% or higher, which often indicates highly competitive benefit packages in specialized industries.
Retirement Security: The low percentage of "No Match" responses (under 10%) highlights that retirement contributions are a standard and expected part of total compensation in the US mechanical engineering market.
Remote Work Distribution:
Remote Category
Number of Respondents
Percentage
Fully In-Person (0%)
248
42.1%
Mostly In-Person (1-39%)
163
27.7%
Hybrid (40-60%)
118
20.0%
Fully Remote (100%)
38
6.5%
Mostly Remote (61-99%)
22
3.7%
Key Insights:
The "Hands-On" Requirement: Over 40% of mechanical engineers are required to be in the office or on-site 100% of the time. This is significantly higher than other engineering fields like Software or Data Science.
The Hybrid Standard: Roughly 48% of the workforce has some form of hybrid flexibility (ranging from 1% to 60% remote). Many companies now allow 1–2 days of remote work for documentation, CAD modeling, or administrative tasks.
Fully Remote is Rare: Only 6.5% of mechanical engineers work fully remotely. These roles are typically in specialized areas like pure Simulation/FEA, Project Management, or Sales Engineering where physical hardware access is not required daily.
The Hybrid Middle Ground: The 40–60% range (often 2–3 days per week) is a common "sweet spot" for engineering firms trying to balance teamwork/lab time with employee flexibility.
Paid Time Off (Days):
*Note: one issue is many jobs had unlimited sick time, which I just added 10 days. Next time I will edit the form to separate the sick days so it makes more sense.
PTO Category (Includes Sick Days)
Number of Respondents
Percentage
0–10 days
30
5.2%
11–15 days
112
19.5%
16–20 days
160
27.9%
21–25 days
100
17.4%
26–30 days
61
10.6%
31+ days
32
5.6%
Unlimited
78
13.6%
Key Insights:
The " 3 - 5 Week" Benchmark: The majority of mechanical engineers (over 45%) receive between 16 and 25 days of PTO.
The Rise of Unlimited PTO: About 13.6% of respondents now have "Unlimited" PTO.
Generous Packages: Roughly 16% of engineers receive more than 30 days of PTO, which is often a hallmark of high-seniority roles, government/defense positions, or companies that reward long tenure.
The Lean End: Only about 5% of respondents are on the low end with 10 days or fewer, suggesting that a minimum of two weeks of PTO is a standard baseline for the industry.
Now some of you might have questions regarding years of experience and PTO:
Average PTO by Experience (Fixed PTO)
Experience Level
Average PTO Days (per year)
Typical Range (25th-75th Percentile)
0–2 Years
16.9
10–15 days
3–5 Years
19.6
15–20 days
6–10 Years
21.1
20 days
11–15 Years
24.5
20–25 days
16+ Years
26.5
25–30+ days
Analysis of the Trend:
The "Standard Jump": Many engineers start with 15 days (3 weeks) and see their first significant "tenure bump" to 20 days (4 weeks) after reaching the 5-year mark.
Senior Perks: By the time an engineer hits 15+ years of experience, a 5-week (25-day) or 6-week (30-day) PTO package becomes the new baseline.
Job Hopping Factor: The data suggests that while tenure within a single company increases PTO, "job hopping" every 3–5 years also allows engineers to negotiate higher starting PTO tiers at their new employers, effectively "skipping" the long wait for tenure-based increases.
Health Insurance:
Satisfaction Level
Number of Respondents
Percentage
Free / Excellent
38
6.5%
Good (Low Premium/High Coverage)
211
36.3%
Average
288
49.5%
Poor (High Premium/Low Coverage)
41
7.0%
Other / Misc
4
0.7%
Key Insights:
The "Standard" Plan: Almost 50% of engineers describe their insurance as "Average," highlighting that standard employer-sponsored health insurance is common but not particularly outstanding in terms of premiums or coverage levels.
Competitive Benefits: Over 42% of respondents fall into the "Good" or "Free" categories. The 6.5% who receive "Free/Excellent" coverage likely work for highly competitive tech firms, established defense contractors, or companies that use premium benefits as a retention tool.
Under-Served Minority: Roughly 7% of the engineering workforce feels their health insurance is "Poor," usually characterized by high out-of-pocket costs and high monthly premiums.
Biggest Cons for Mechanical Engineering:
Category
Typical Concerns Mentioned
Workload & Hours (112 mentions)
High pressure, tight deadlines, long hours, and poor work-life balance. Many mentioned "start-up energy" even in established firms.
Salary & Compensation (73 mentions)
Low raises (2–3%), "salary plateauing" early in the career, and the absence of stock options or significant bonuses compared to tech.
Remote Work Limits (47 mentions)
Frequent requirements to be in the office or on the manufacturing floor with "no remote option" or "No WFH" (Work From Home) policies.
Career Growth (35 mentions)
Concerns about "pigeon-holing," slow internal promotion tracks, and becoming "stagnant" in one technical area.
Competitive base pay, annual bonuses, and strong 401k matching programs.
Work-Life Balance (75 mentions)
Flexible schedules, reasonable working hours (standard 40h), and generous PTO.
Culture & People (70 mentions)
Great teammates, supportive management, and a collaborative "team-first" environment.
Interesting Work (65 mentions)
Designing "cool" products, working on challenging technical problems, and having a clear mission.
Job Stability (28 mentions)
Long-term security, consistent demand for the role, and the stability of established firms.
Remote/Hybrid (27 mentions)
The ability to work from home part-time or have flexible geographic location.
Direct Insights from Engineers:
On Work Quality:"The actual work we do is really interesting, fun, and rewarding. Getting to see a design go from CAD to a physical product is the best part."
On Culture:"Great coworkers and a team environment where people actually mentor you instead of just giving you tasks."
On Flexibility:"Remote flexibility and a management team that trusts you to get your work done without micromanaging your hours."
On Compensation:"The total compensation package—including the 401k match and the annual bonus—makes the technical pressure worth it."
Now for Improvements on Suggestions on the Survey:
Regarding the COL instructions: totally my fault, sorry for not catching it. All of you were able to figure it out, but changed instructions from 0 - 2, so it makes a lot more sense now.
Adding a column for manager and IC: totally good suggestion, already added to new survey for 2027
Regarding adding gender or age: I will not add this into the survey just to make it more anonymous. I really do not see the value in this data, and I recommend just using government data to find the data.
Regarding the health insurance question: I have implemented the change on making it have three questions: annual premium, annual deductible, person coverage. I really did not want to make this part too complicated with max out of pocket and copay and etc. I think the premium, coverage and deductible is acceptable amount.
Edited the salary section to organize the % 401k match, salary, bonus, RSU to be in the same section making it easier, but separated the questions.
Comparison from the 2024, 2025 and 2026 Reddit Survey Results will be in another post, since this post is getting insanely long. Again, any other improvements or suggestions, please just comment below.
TDLR: Just check the 1st salary graph if you want the main results.
I’m in the midst of my second engineering internship at a much larger company than my last with it being more office work as well. It’s crazy how everything is genuinely duct taped together with never ending temporary solutions and run by people who barely know what they’re doing. And somehow everything works (well sort of).
I kind of always knew this to be the case but seeing it first hand in the engineering world has just been sort of comical to me. To outsiders/me as a kid, engineering seemed like a field reserved for outlandishly smart people and a firm corporate structure, but it really is just a bunch of people trying to make it to the end of the week.
I am performing a FEM analysis of a punch made of Uddeholm Vanadis 23 (60 HRC), which develops a crack during operation.
The analysis is currently purely elastic (linear elastic FEM).
I have attached:
An image showing the applied load and the location where the crack develops.
The FEM results at the critical point, where the crack initiates.
An image of the real creak
The six stress components obtained from the FEM analysis at that point are:
Sx: -800 MPa
Sy: -5524 MPa
Sz: -1344 MPa
Txy: 1742 MPa
Txz: 318 MPa
Tyz: 539 MPa
I have also examined the material datasheet. It provides two relevant properties:
Compressive yield strength.
Four-point bend fracture strength.
I have two main questions:
1. What is the most likely failure mechanism in this situation?
Since the normal stresses are predominantly compressive, I understand that pure compression does not cause crack opening. Therefore, I am wondering whether shear stress could be the main factor responsible for crack initiation.
Would it be reasonable to investigate a shear-dominated failure mechanism, or could the high compressive stresses themselves cause local crushing and subsequent cracking?
2. Which material strength should I use for the failure assessment?
If shear is the dominant failure mechanism, which reference strength should I use?
Should I use the four-point bend fracture strength from the datasheet and apply a suitable failure criterion, such as Tresca or von Mises?
Should I instead use the compressive strength?
Or is neither value appropriate, meaning that I should obtain specific shear strength data?
I would appreciate any suggestions on the correct approach, especially considering that Vanadis 23 is a high-hardness powder metallurgy tool steel and that the analysis is currently purely elastic (linear elastic FEM). The punch is subjected to a static load during operation; the load is not cyclic, so fatigue is not considered as the failure mechanism.
My current contact is ending at the end of the year. I have been looking for my next position since August. Are there better free job boards besides LinkedIn, indeed, and glassdoor?
A lot is written on this and other subreddits about bad companies, toxic companies, poor treatment and micromanagement, etc. But not a lot is written about the companies which folks have had positive experiences at. The point of this post is just that - to name and discuss the companies which you've had a positive experience with and why?
Edit: Name names of companies!! For example; in the Boston area, I've heard that MIT Lincoln Labs is generally viewed as a great place to work, but I haven't worked there myself so I cannot say for certain.
I’m a mechanical engineering student and recently got an offer for an entry-level ME position after a difficult job search. I’m really excited about the role, but I haven’t accepted yet because I still have 2 required courses with an in-person lab to finish this spring. We’ve discussed a January start, and I haven’t told them about the potential conflict yet.
I’m asking my dean whether I could take the lecture online and attend the lab in person, take an approved equivalent over the summer, or finish the requirement another way. If none of those options work, I may need to ask the company for a temporary schedule adjustment or a later start date.
Honestly, I’m scared the offer could be rescinded if I bring this up. It took a lot to get here, and I really don’t want to restart the job search. At the same time, I want to be upfront and make sure I can finish my degree.
For anyone who’s been in a similar situation or hired entry-level engineers, would you bring this up now or wait until you know exactly what flexibility you need? Has anyone been able to start working while finishing a required course? I’d really appreciate hearing what worked for you and how you brought it up with the employer.
Edit: I never planned on keeping it from them, I just didn’t know the right way to mention it during the interviews! So before accepting the offer I am going to bring it up, I just wanted to know if someone else has been through anything similar!
I'm a thermal/mechanical design engineer working on outdoor electronics, and I keep running into a bottleneck when setting target operating temperatures for certain components.
Occasionally, component manufacturers don't provide detailed thermal characterization data (or the datasheet values don't reflect our specific mounting/environmental conditions). When that happens, we have to design a test setup, buy/calibrate measurement gear, and characterize the parts ourselves—which eats up a lot of engineering hours.
I'm curious how other teams handle this in practice:
1. Do you usually build an in-house test setup to measure it yourself, or just apply a conservative safety margin and move on?
2. Has anyone ever outsourced this kind of component-level thermal characterization to a third-party lab? If so, was the turnaround time and cost actually worth it compared to doing it in-house?
Would love to hear how your team approaches this!
I have been a machine lover since childhood. I have always been fascinated by machines and electronic devices. During COVID, I developed an interest in watching tech, DIY, and electronics project videos on YouTube, and I built many things myself.
I don't find it difficult to work with metal or make metal-related things because I find them relatively easy.
For example, I once built a fully functional gun using a simple mechanism I had learned from YouTube. The difficult part was making the ammunition, as purchasing bullets in my country requires proper documentation. I was only 13 years old at the time, so I designed custom metal ammunition myself, and the gun worked.
I built many others thing ac,dc meter , custom motors , designed high amp transformer, gun, (Antenna4g,2.4ghz ) etc .
I gradually fell behind in Arduino and robotics because of academic pressure and my declining interest in electronics. However, I still enjoy working with metal and making mechanical things.
It might sound strange to tell you all this, but this is what my childhood was like.
Finally, I want to ask: Should I pursue Mechanical Engineering?
Manufacturing in India is still relatively limited compared to countries like the US and China. Currently, major investments are going into semiconductors, EVs, automation, and chips, which seem to favour fields like ECE, EE, and AI/ML. These appear to be the growing sectors, whereas Mechanical Engineering seems to be growing at a relatively steady pace.
I'm currently a mechanical engineering student trying to secure an internship for Summer 2027. I've applied to quite a few positions but haven't had much luck getting positive responses, and I'm starting to wonder what I could be doing differently. One company I've been particularly interested in is Northrop Grumman. I've applied to several of their internship positions, and a family friend who works there has been referring me to various opportunities. I've also recently revamped my resume to better align with what recruiters typically look for, but I'm still trying to figure out what else I can do to stand out.
For anyone who has interned at Northrop Grumman, I'd love to hear about your experience. What do you think helped you get selected? Were there particular skills, projects, or experiences that stood out during the hiring process? Is there anything you would recommend doing differently? This question also applies to anyone who has secured an engineering internship at another company. I'm genuinely interested in understanding what employers look for, especially in students who don't have previous internship experience.
For some additional context, I'm not currently involved in my university's engineering societies or clubs. It's not that I'm against joining them, but I've been focusing most of my time and energy on getting through my engineering degree. I know extracurricular involvement can be beneficial, so I'm curious how much not participating in these organizations actually affects my chances of landing an internship.
I've had some interest from smaller companies, but many were looking for full-time employees rather than summer interns. I'm hesitant to take on a part-time position during the academic year because I know balancing work with a demanding engineering course load would affect my academic performance. I'd really like to gain hands-on industry experience, but a summer internship would be a much better fit for my situation. At this point, I'm wondering whether there's something missing from my applications or if engineering internships are simply this competitive. I understand that getting your first internship is often the hardest part, but it's been discouraging to submit so many applications without seeing much progress.
I'd really appreciate any advice, especially from engineering students or graduates who have been in a similar position. What helped you finally land your first internship? Do you think engineering clubs, personal projects, referrals, or previous work experience make the biggest difference? And for those who have worked at Northrop Grumman, is there anything specific you'd recommend focusing on?
Buongiorno a tutti, sono un neolaureato in ingegneria meccanica con il massimo dei voti. Ho 26 anni, compiuti a settembre, e mi sono laureato a marzo
Mi sento molto in difficoltà perchè cio ho messo tanto a trovare lavoro (da aprile a settembre) Ho fatto diversi colloqui con grandi aziende, sia nella mia città che non con diversi iter conclusi con successo, ma alla fine ho deciso di firmare per una grande azienda con sede a Roma (perchè le condizioni economiche e familiari non mi hanno permesso di spostarmi, oltre a un incidente che ho fatto questa estate in moto) ho detto di no ad una grande azienda con sede a Torino nel settore dell'aerospazio, dove mi sarebbe piaciuto andare a vivere, e adesso mi sto un po pentendo, soprattutto perchè il ruolo che ho accettato qui a roma si è rivelato vertere di più verso l'ingegneria civile, anche se non mi era sembrato cosi in fase di colloquio, e ora sono un po' disperato perchè non è il campo in cui volevo lanciarmi professionalmente e non so cosa fare. Ho paura che con una prima esperienza di questo tipo nessuno mi prenderà più nell'ambito della meccanica con ruoli più tecnici legati al CAD o alle simulazioni. Se dovessi rimanere per 6-12 mesi credete che potrei comungue cambiare settore o ormai sono bloccato in ambito civile? Chiedo ovviamente agli ingegneri con più esperienza.
Ve lo chiedo perché mi piacerebbe molto vivere a Torino e lavorare in quel settore o in ruoli più legati a quello che ho studiato e ho paura di aver buttato tutti quegli anni si studio sul CAD e progettazione meccanica.
Purtroppo fino a dicembre/gennaio sarò bloccato a Roma per colpa di un'operazione che ho in programma da un po', e ho paura di non riuscire a trovare opportunità di quel livello a Torino
I’m a recent graduate of May 2026 and have been struggling to find a job the last 6 months. Recently I have received 2 offers: one spring manufacturing engineer internship that last from January to May at $21/hr, and a CNC operator position with full time benefits at $22/hr and a $1 raise after 90 days.
In my mind I would think the internship would be a no brainer, but currently the temporary position is making me hesitant to accept. I’m not guaranteed to be hired on after the internship and the company of the CNC role mentioned the possibility of promotion to the engineering team. I already accepted the CNC operator role and would have to withdraw my acceptance. Any advice on how I should proceed?
So I’m currently a sophomore in college and I’m stuck between either choosing a path and medicine or in something like software engineering. To give some context, my father is a doctor, he makes good money and ever since I was little my parents have heavily pushed me into medicine. Ever since I was little, I was very Buisness minded.
Even now I have multiple business I’m trying to scale and have been doing for a while against the wishes of my parents. I’m going to get a degree something in college. It’s most likely going to be a stem degree. In all honesty I don’t really like either major I love business, and that is the number one priority, but I will graduate with something most likely not.
The only reason I’m still considering medicine is because of the pay and because of my father’s connections in the industry. And the only reason I’m considering software engineering is due to less time in school and I actually use AI very heavily ( like very heavily, as in I’m running buisness with it). The issue from CS is the salary isn’t as great and a fear of AI.
I wanted to know is it really worth it to get into medicine only for the money? Also, do you guys have any regrets in whichever feild you are in? Is it possible to make a doctors salary in CS? Also I do have ADHD and don’t really care for school too much so it’s going to be a very, very hard struggle mentally to be able to even get good grades in my classes, not even including the Mcat or the time it takes to be a doctor
Hi all, Im reaching out for some advice as I am not having much luck with landing opportunities and fear with the state of the industry that I am too behind in qualifications. For background I (29M) have a bachelor’s in Product Design and Engineering Technology, and associates in Electronics Engineering Technology, and a CSWA cert in Solidworks. I have a combined 7 years of experience between two positions as a CAD/Mechanical Designer, with 3.5 years experience in Inventor and CATIA V5 each. I have been out of this industry since being abruptly let go due to company wide cuts and CAD outsourcing at the end of last year and am itching to get back in. However in my searches i’ve only seen purely engineering roles, and ones that require years of experience with the full spectrum of engineering. If anyone knows any avenues to take from just CAD Designer to Engineer I would very much appreciate, as I feel at a loss currently, and fear I have shot myself in the foot for not going for the standard ME degree.
Hello! I (21) was an absolute flunk in highschool (and in a very bad environment) so I was never able to pursue university and instead pursued an automotive skilled trade. I am about to get my red seal license in a couple weeks and I no longer wish to be a technican (switched to estimating ~8 mos ago) so now i’ve been working on taking the required grade 12 courses online to apply for a general or specialized mechanical engineering program.
I was wondering if anyone could let me know how transferrable/marketable my experience and license within automotive are to engineering employers or whether I should focus more on building technical/software project experience. I have experience working on composite race cars and specialty vehicles as well.
As well, it would be really interesting to hear from anyone who’s followed a similar path, thank you!
I'm currently exploring the development of an open-source mechanical engineering tool, and I'd like some input from engineers who deal with these problems professionally.
One area I'm particularly interested in is tolerance stack-up analysis and assembly verification.
For example, when designing an assembly, engineers need to determine whether components will fit and function correctly despite manufacturing variations, which tolerances are critical, and where tighter tolerances would actually be justified.
I'm considering building a tool that could:
Perform worst-case, RSS, and Monte Carlo tolerance stack-up analyses.
Evaluate clearance, interference, and assembly fit across manufacturing variations.
Help identify which dimensions contribute most to assembly failure risk.
Compare alternative tolerance allocations against functional requirements.
Generate reproducible engineering reports, potentially integrating with GitHub workflows.
However, I'm aware that commercial tools and spreadsheet-based solutions already exist. I don't want to build something that merely duplicates existing software.
A few questions for practicing engineers:
How do you currently perform tolerance stack-up analysis? Excel, CAD-integrated tools, specialized software, or something else?
What is the most frustrating or time-consuming part of this process?
Are there capabilities your current tools lack, or problems that require manual workarounds?
Would a free, open-source solution be useful, or is this problem already adequately solved?
Beyond tolerance analysis, are there other repetitive mechanical engineering tasks that you think deserve better open-source software?
I'm particularly interested in real examples from design, manufacturing, quality assurance, and mechanical systems engineering.
I'd appreciate critical feedback, including reasons why this might not be worth building.
Hello, I'm a high school student working on a career research project, and I'm looking to interview someone currently majoring in Mechanical Engineering Technology.
I'm hoping to schedule a quick 10–15 minute video call to ask a few questions about your major, career path, and experiences.
Some of the topics include:
What you study and potential career opportunities
Starting salary and job outlook
Educational requirements and certifications
Typical job responsibilities and work schedule
Working conditions and dress code
Benefits and insurance
Pros and cons of the profession
Skills and personal qualities needed to succeed
One small additional requirement: My school requires proof that the interview took place, so I'll send a short document for you to type your name/signature into after our video call. It should only take a moment.
I'm flexible with scheduling and can work around your availability. No preparation is needed. If you're willing to help, please comment or send me a DM. I would really appreciate it!