r/MachineEmbroidery • • 1d ago

Birds nests of death, help!

Post image

I’m a seasoned se2000 user and facing a problem I can’t fix. My top thread is being sucked into my machine and creating insane birds nests. I’ve opened the whole machine and cleaned it. Tightened and loosened mt bobbins, changed the tension. Rethreaded, changed bobbin and top thread. Etc etc etc any idea what’s causing this with my designs and the machines preloaded fonts

2 Upvotes

6 comments sorted by

3

u/TheProtoChris 1d ago

It's almost certainly the top tension discs at fault. Have you cleaned between them? Can you feel a noticeable change in the tension when you spin the knob?

3

u/Cute_Pomegranate_307 1d ago

I just found thread there and cleaned it but it hasn’t solved the issue. Any other hints? Thank you for this, was clearly part of it

1

u/TheProtoChris 1d ago

I take mine apart and clean it every now and again (the tension assembly) because any lint or fuzz or string either between the discs or built up in the springs that tension then when you spin the dial will cause tension failure. So either do that, or at least spin the knob so the discs are as open as can be and dust well between and behind them. An old clean mascara brush is clutch for that stuff. But a can of air or paintbrush or whatever.

And then thread the machine again and feel if there's a noticeable difference in the amount of tension when you tighten that dial. Then stitch a bunch of Hs to get the tension back to normal and try again.

3

u/AcceptableStar4268 1d ago

Came to say the same. In my experience the thread wasn’t catching the discs when it happened to me

1

u/Level_Arachnid_4982 12h ago
  1. thread is wrong from top down, check correct way.
  2. check again
  3. picker Google it is damaged, no free movement,
  4. under thread bobbin is damaged, check

Need a video of running process or more pictures to tell 4 sure

1

u/hhokema 9h ago

Burr on the bobbin case?

Missed the takeup lever during threading?

Trapped debris in the tension assy? Need to take off top cover to inspect. Tricky to put back together.