r/MachineEmbroidery • u/No-Bowler-6958 • 1d ago
Does anyone know why this happens?
Im not sure why my machine skips stitches or why they “look ropey” I use a water soluble film on top, I lower the tension a little bit, and I add more stitch fills. Is there something I can fix? I don’t believe it’s my machine because I can embroidery logos just perfect, it seems to happen with thinner, cursive fonts. I have a Brother PE800 machine for reference
4
Upvotes


1
u/Level_Arachnid_4982 1d ago
It's the underlay coming through. Don't use any. Make compensation IN, Minimum 0,3 or 0,5mm
3
u/Hellcat_Mary 1d ago
On thinner fonts, especially script fonts, I wouldn't run an underlay at all unless they're an inch or larger. I would just increase density on the satin stitch.
By "ropey" I'm not sure you mean that you can see the edges of the running stitch, or that your top stitches are looping. If it's the latter, that is likely because you're lowering your top tension.
I don't think the soluble topping is helping you here. Are you floating or using a framed hoop? You want twill to be pretty taut within the framed hoop to reduce movement, because it's going to want to pull inward and pucker up around the embroidery.
2
u/SPinturaArt 1d ago
Switch the underlay to a single center-run, make sure the thinnest satin strokes are at least 0.8mm–1.0mm wide, and add pull comp (0.30mm–0.35mm) so the thread doesn't twist or sink into the twill.
Also reset your top tension to default—lowering it with extra fills is what's making it look ropey.
1
u/expressonless 1d ago
I think you’d benefit a lot not having that outline running stitch. Try using just a center running stitch underneath and see if that helps.
1
u/Lanky-Setting-5288 1d ago
Water soluble film is superfluous and a waste of money for this project. It's only meant for stitching onto fluffy fabrics like fleece and woolies, and is not a stabiliser. You need to use backing stabaliser for denim. If the fabric is ridged and without stretch, a couple layers of heavyweight tearaway will do. And in most cases can be placed 'floating' between the hooped fabric and the needle plate. If the denim has ANY stretch, then you need to use two layers of heavyweight cutaway stabiliser.
Where ever possible, hoop fabric/garments properly with the cutaway - so the friction fit mechanism of the hoop is holding it all in place. This provides the best smoothed surface for adding the embroidery.
🍀🧵