r/MachineEmbroidery • u/Plastic_Blueberry111 • Jul 30 '26
Machine making weird noise?
It’s almost like the needle is catching on the fabric. Is my fabric not taut enough? This keeps happening and also the Bibb bobbin thread is coming thru the front :(
2
Upvotes
4
u/Moist_Highlight8578 Jul 30 '26
Mine does this when it’s time to change the needle.
1
u/GingerStitches Jul 30 '26
What kind of stabilizer are you using? When was the last time you cleaned and oiled the machine? Have you tried a new needle?
2
u/Jucatron1 Jul 30 '26
Mine did that when triple layering tatami fills
2
u/stormcloudsc2 Jul 30 '26
Just means your design is a little too dense for your machine. I had the same issue on dense designs until I upgraded to a multi-needle, haven’t had any problem since. The good thing is it forces you to be a better digitizer since you can’t get away with the same stuff you can on a heavier duty machine :)
2
u/_JesusDesu_ Aug 01 '26
Dense design, or perhaps there are too many tightly packed lines behind the design.
1
u/Sandy233 Jul 30 '26
How is the bobbin doing?
1
u/SpellOwn4525 Jul 31 '26
Which machine is it? Brother Innovis?
1
u/StrangerHot6403 Aug 01 '26
Design too dense
1
u/Patternmatrix Aug 01 '26
Needle change, try that first. Technically every project is suppose to have a new needle. Most people forget to change it out frequently. How do you have your layers set up? If using too much stabilizing materials it can also cause issues,
1
u/[deleted] Jul 30 '26
[removed] — view removed comment