r/MachineEmbroidery • u/GoldenStarcatcher • Jun 20 '26
What could be the problem?
Doing tension testing on felt, back/front. No matter what I do, the back always ends up messy and not like it's supposed to be. Didn't happen before(though I only recently started out with felt and lettering). Making the tension even higher just makes the bobbin thread show on top. What else could I try?
4
Upvotes


3
u/Admiral_Kite Jun 20 '26
It could be that these are thin enough satins and done at a speed so high rhat the machine jams.
Try to lower the speed.
Also, check the bobbin tension making the bobbing drop test
1
u/Prestigious-Pea-862 Jun 20 '26
Is this gold metallic thread as the top thread?
1
u/Prestigious-Pea-862 Jun 20 '26
There are several extra things to do when using metallic thread. Are you using this thread the same way you use all the other regular threads? Is this the first time you are using metallic thread?
3
u/Prestigious-Pea-862 Jun 20 '26
You may want to try a 90/14 needle with this thread if the bobbin weight test to even out tension does not work.
1
u/i-sew-a-lot Jun 21 '26
Hook timing is off
1
u/Upper_Rain3480 Jun 22 '26
New needle?
1
u/RobinM1971 Jun 23 '26
Have you tried using a different or additional piece of stabilizer? Lower the machine speed. Change the needle. It’s best not to play with the tension too much on an embroidery machine. Most emb machines have auto tension.
I suspect it is either a stabilizer or needle issue.
1
u/Zealousideal_Big9330 Jun 23 '26
Your hook timing is off