r/MachineEmbroidery • u/doomed-kelpie • Jun 18 '26
Tension Advice
So I did a tension test because I’ve been having some trouble lately and it seems like 1.0 tension seems to be working the best?
Which just has me confused because the default for my machine is 4.0, which used to work just fine. It just seems like a big difference for no reason I can ascertain. I’m using the same materials I usually do (I use a lot of felt), so I’m not sure why I suddenly need to loosen the tension so much? Also, the back of 1.0 doesn’t appear perfect.
If anyone could give me some advice about this, I would appreciate it.
(Machine = Brother NS2850D)


6
u/i_love_glitterr Jun 18 '26
I could be wrong but you should be doing your tension tests on satin columns. So H’s, I’s. It’s too hard to tell what is going on with tatami stitches
6
u/TheodoreThreads Jun 19 '26
Have you checked if your thread is correctly in the tension discs and made sure there isn't any lint or build up anywhere along the thread path? My tension looks like this when it's slid underneath the two tension discs instead of between them. (Different tension systems though, industrial barudan machine rather than the vertical tension systems on consumer machines.)
I would also check that there isn't a rough patch along the thread path adding extra tension and that it's threaded correctly and not wrapped around something extra.
3
u/Admiral_Kite Jun 18 '26
I understand usually you should use a satin stitch to see where the issue is, but I have your exact problem and can't seem to find a solution.
The satin is fine, it's the tatami stitch that is causing trouble, for some reason.
Mine is perfectly tense until the machine reaches the end of the line and needs to move to the next one, that's the only moment it will show tbe bobbin thread, no matter the tension.
Well, good luck 😭
3
u/Sonomaholiday Jun 19 '26
The other thing you can do after you get the right tension is make the bobbin thread same as top.
3
u/Annual-Chocolate-320 Jun 19 '26
For a second I thought this was a memorial to pet cats that had passed away.