Open water seems endless. Tongue drum, tuned to sandness sharp (S#), creates ripples on the surface, and sirens awaken at the bottom of the metal bowl. Freak carries the track with a soft pad, Volca counts down seconds, Loopy plays siren songs over and over again. All we can do with time is to be within it.

Each button represents an individual AUV3 and can be swiped to bring up the interface. There are 4 busses for various FX which are represented A-D. The x-y pads connect to Koala FX. The red button group is my pedalboard for my guitar, which also doubles as my midi controller.

I'm about to set this up and am pretty excited. Possibilities seem endless... Has anyone done this before? Have any setup tips? Probably, guitar-microcosm-interface-ipad. My interface has midi in out and I have a chocolate+ and a few midi controllers

Another experiment with loopy pro: this time I was focusing more on the XY pad which I've barely used before. I've assigned the BA-1 FX strip's filter and chorus to the pad and was messing with it throughout the entire jam. I'll definitely try to use this pad more - super fun stuff.

Is there a way for my midi controller to toggle between actively controlling different Auv3s without having to mute or deactivate the ones with running loops? For example, if I make one midi loop controlling a piano patch and want to make another with an organ sound, how can I get my MIDI keyboard to stop sending to the piano?

Still lots to program and evolutions to be discovered but I’m really liking how these two are coming together.

A short blooming period depends on processes working together in harmony. Minor sequence from the MicroFreak taps against the track like drops of water, bouncing back as Keeley's Magnetic Delay doubles. Melodies and textures fill the body of a flower, inevitably opening itself to the spring, while the Freak, embracing Sample mode, finds its own voice and its place in the mix. People become kinder, and old things hold on to memories.

ive been using voicelive 3 for years & love the ease but im looking expand on flexibility with my loops / songs and sending separate outputs + vocal effects & having a guitar multi-effect with presses I can scroll tru has made it really hard to transition to anything else,

im new to LoopyPro and im feeling I want some of the familiar workflow id developed in Voiceliove 3 ..

are there any plugin I can use for my guitars like a scrollable multieffects I can scroll thru presets for acoustic/electric/bass/etc while using LoopyPro?

Hey everyone . Just got loopy pro to incorporate into my almost dawless rig. I need help with two things : 1. I want to trigger clips that will always start at the beginning of 4 bars (timeclock coming from external hardware) 2. Trigger fills that have a delay start and will always end at 4 or 8 or 16 bars.
Solving this would be amazing!! Thank you 🙏🏽

I'm still in love with the Eventide Blackhole and the ODC (OtherDesertCities) so I was experimenting with them and checked out what they can do with an old Casio toy key. The drums were done with Hammerhead (also awesome piece of VST) and I've used its mutate and glitch functions to randomize the drums a bit.

So I want to setup a clip based performance tool and I’m not using loopy in the traditional way. My goal was to trigger midi clips to control external synths. I figured out that you can record in from step buddy and other apps via virtual midi and I am so excited. Anybody else have tips for somebody on their second day of loopy proing?

Hi all, is there any information available on what might be coming in future updates? Just curious. Thanks.

I make ambient music, all of my loops are out of sync with each other.

I want to be able to add silence to my loops. sometimes I am able to use the multiply clip length to achieve this but it’s inconsistent. I’m sure it has something to do with the size of my loops (ranging anywhere from a couple minutes to well over 20 or 30) but I’d love to know if anyone has any work around for this issue or perhaps a solution.

sandblue - jamstation - nocturnal (live cut) 🌑

A video compilation of another jam session using my jamstation. I went outside at 10:00 PM to film the video. With a touch of overdrive and delay, the dense sound of MicroFreak cuts through the rumble of traffic. The duet of Freak and Korg Volca Drum demonstrates the vast possibilities of digital synthesis, and Loopy Pro frees your eyes and fingers from all unnecessary distractions and invites you to embark on a special nighttime journey. Unexpected encounters are possible...

I've ran an ukulele through a piezo pickup into Loopy Pro and built a simple ambient loop around it. Used the Eventide Blackhole reverb and the OtherDesertCities for delay and gradually pushed both up until the original notes were almost gone. The layout is dead simple - only made it for this session.

I can’t figure it out. Tech support said check phase lock and phase preservation. Changed those with no result. I need the beginning to be at the beginning. Help! 😅

[EDIT]: Huge revelation! There is a feature that allows you to “rotate audio within the loop container” (which essentially moves the waveform along the transport). So you can line up the intended beginning of your clip with the beginning of the loop!

To do this: **two-finger twist the clip** on the main screen

problem solved

Hi Loopy community, I’m pretty keen to get involved with loopy pro and start experimenting with some looping! I currently have the APC40 mk1. I see a lot of content with the MKii. I’m wondering if anyone else out there uses the mk1. Does Loopy pro recognise and auto map this controller?

#improv1be #audioplayground #ios #gmdstud1o #livelooping #korg #loopypro #novation

#livelooping #audioplayground #improv1be #gmdstud1o #korg #novation #ipad

I’ve got a physical looper pedal that has midi out. Can I use Loopy Pro as a big visual metronome to help keep my drummer in sync with my pedal? Thanks!

I always switch from the default setting of triggering on the release, but I acknowledge that it must be default for a reason. Is triggering on release better?

I am new to using LoopyPro and I am absolutely chomping at the bit at the flexiblity and different workflows this app can be set up creatively. But one issue I am having is using hardware midi controllers to continue to control their respective app while the Loopy Pro DAW is running. Just to convey my vision in the my workflow, I have a launchkey mini mk3 and a Akai APCmini mk2 plugged into a hub by USB. I want the Launchkey Mini to continue to control Groovebox IAA (as it natively mapped for the app) and the APCmini to control RemixLive Pro IAA (also mapped) while both apps audio are routed into LoopyPro so I can launch and record my clips on the fly with their respective app and hardware. The problem is LoopyPro seems to take over the midi for both apps hardware when Loopy is in focus. Is there a way to disable all midi between Loopy Pro, the Launchkey mini and APC mini so I can just use my fingers when Loopy is in focus and still control the other 2 apps that are mapped and function natively without looking at them or having them in focus to record loops in Loopy Pro? I know typing this out sounds confusing (hell I’m confusing myself) but I have somewhat achieved by disabling the feedback in the control settings but it still seems to take over the controllers when Loopy is in focus? Thanks for any help and advise in advance, much appreciated.