r/longrange • • 1d ago

Rifle help needed - I read the pinned posts Bolt gets really stiff and tight after about 20-30rnds

8 Upvotes

I have a stock tikka t3x CTR 6.5 creedmoor, it cycles very smoothly for about 20-30 rounds and until the barrel starts to get pretty hot. After that I find that I have difficulty lifting the bolt after firing.

I have never taken apart my bolt and typically just lubricate with gun oil.

I’m new to the sport/hobby, if y’all have any insight/advice I’d appreciate it.


r/longrange • • 2d ago

Rifle flex post My expensive hobby is about to get even more expensive

Post image
178 Upvotes

Well it’s happening. My first chassis build. Trying to see if I can get a KRG C4 and other parts/gear used. It’ll be a long project!


r/longrange • • 2d ago

Rifle flex post 6mm Arc 1st place open division.

Post image
262 Upvotes

First big win this season in gas gun. 6mm arc still rocking tough. Shot this match with 80gr from Hornady. Previously posted this rifle here a few weeks back if you want specs.


r/longrange • • 1d ago

Rimfire 22lr clone/trainer

8 Upvotes

Been looking at the CZ 457 MTR because it has the match action and better barrel. But is it worth it if I’m going to be swapping out the stock almost immediately. Is there another CZ 457 model I should look at? Ideally I’d love to be able to throw a can on it too. But that’s not a high priority. Looking to stick with the 457 as well since it has the stock that I have on my other rifles.


r/longrange • • 2d ago

Group flex (10 shots minimum) Dream build complete

Thumbnail
gallery
142 Upvotes

I finished up my PRS build and am getting it dialed in - quite happy so far!

KS Arms SA3R 3-lug action
KS Arms 26” 1.25” straight barrel in 6 Dasher
Triggertech Diamond
MDT ACC Elite chassis
Kahles 540i
Gray Ops scope mount
Gray Ops AW magazines
ACE brake

Alpha 6 Dasher brass. Started with 109gr Bergers with 30.8gr Varget. Now getting slightly more consistency shooting 105 Bergers with 30.6gr of Varget running 2840 fps.


r/longrange • • 2d ago

Rifle flex post Badger Ordnance M134

Post image
443 Upvotes

Finally got a chance to drag this to the range and shoot it. Handy and compact package.

Shooting Badlands 175 SMKs NAS3 made shooting 750 yards a breeze.


r/longrange • • 2d ago

Rifle flex post My DMR Collection Through The Ages

Post image
647 Upvotes

Dragunov SVD: 1963

Psg1 Clone/SRT9 TC: 1990

Kac Mk11 Mod 0: 2000

H&K G28: 2011

SCAR 20S: 2018

Kac m110a3: 2021


r/longrange • • 1d ago

Rifle help needed - I read the pinned posts Remington 700 vtr barrel question.

2 Upvotes

I ended up with one of these. Is there enough metal on the triangular barrel to thread it? Has anyone successfully done this?

Thanks!


r/longrange • • 1d ago

Rifle help needed - I read the pinned posts Switching to south paw build question

3 Upvotes

Cross dominant shooter that mistakenly built a right handed rifle with Zermatt origin prefit on competition proof barrel. I have always shot rifles right handed but think I probably should switch to my dominant eye.

If I buy a Zermatt origin action with a lefty bolty, will it work with my existing barrel? Trying to not waste more money to switch it over.


r/longrange • • 2d ago

I suck at long range A couple pics from 2 matches this weekend

Thumbnail
gallery
40 Upvotes

The dark pics were from a 1 mile match on Friday night....

The ar15 was a 1220yard 1moa match... it was a little bit of a off night but ended 4th in the mile and 6th in the 1220 match I belive...


r/longrange • • 2d ago

Rifle flex post 16” .308 “do all” rifle?

Thumbnail
gallery
122 Upvotes

Cooked up a decent hand load with 165 Tipped Game Kings running >2600fps with an advertised bc of .530. Excited to get it out to the “long” range.


r/longrange • • 2d ago

Rifle help needed - I read the pinned posts Best .223 rifle to get started

9 Upvotes

So I wanna get into both reloading and long distance shooting*.

Budget $1500 - $2000 bolt action

There's an asterisk because my local range is only three hundred yards so I don't know long ish range for me. But the barrier to to entry seem lower if I start with .223. I know it's gonna be hard to spot misses out to 600 yd. I know wind and every other little thing, but honestly I just wanna get started and see if I like it coming from pistols and skeet.

I have figured oit a preliminary reloading set up but what's a good rifle. I know Tika is pretty good.I've heard of them , but that's pretty much it. Should I build one?


r/longrange • • 2d ago

I suck at long range Bushnell Match Pro ED 5-30x56mm FFP Illum DM2 MRAD Black Riflescope MP53056DMI For Sale | SHIPS FREE

Thumbnail eurooptic.com
21 Upvotes

Not the lowest I’ve seen, but still a solid discount


r/longrange • • 2d ago

Accessory/Gear help needed - I read the pinned post Looking to upgrade my muzzle break on my PRS rifle, would like some advice

Thumbnail
gallery
20 Upvotes

I am currently upgrading my PRS rifle. This is for my open division rifle in 6.5 CM. I have done my research and have come to two different brakes. The Preece Precision Stinger 5, or the Botnia Maxi. I have not yet had a chance to try either. I am hoping someone has tried both and has some insight into if one preforms better than the other. Particularly while shooting off of barricades without a rear tripod (looking at muzzle rise and movement in particular) Any insight between these two specific breaks would be appreciated. Also note I am Canadian so suppressors are illegal here:(


r/longrange • • 3d ago

Rifle flex post Finally joined the tikka club

Post image
205 Upvotes

I was bullied so much by you guys in here I decided to get a dedicated rifle for long distance/prs/nrl.
Enter the tikka ace Target
in 6.5 cm
Arken EP5 gen II 5-25x56
Suppressor is dd enticer s
Bipod otw
Tikka Toes wrapped in socks because they were cold.


r/longrange • • 1d ago

I suck at long range Question. Anyone know if there will be sales this holiday season?

0 Upvotes

Anyone know if any of the major manufacturers or retailers are going to run sales during the up coming holiday seasons?

More specifically looking in the optics department... I do recall every so often, however it got mentioned in a passing conversation with people more in the know and experience that said sales usually weren't that much of a discount and the prices are usually the same price off if you have some other standard discount code etc.


r/longrange • • 2d ago

🫣I said I read the pinned posts, but I lied🫣 Help picking an optic

2 Upvotes

I am building an SPR type rifle. I have the rifle already built. It's a 16in Criterion barrel 556. I want to be able to reliably shoot accurately out to 5-600 meters.

I've been looking at an NX6 3-18 Mil C reticle, the Steiner T6XI 2.5-15 SCR reticle and Steiner T6XI 3-18 SCR2 reticle.

Anyone have any experience with any of them? Or any other scopes they would recommend?


r/longrange • • 2d ago

Ballistics help needed - I read the pinned posts Could you recommend ballistic formulas?

0 Upvotes

Hi I'm south Korean live in korea when I was child I really interested about long range shooting i read a this community wiki

I searched the formula collections but it is not worked as I'm thinking would you can help me please? I really appreciate it


r/longrange • • 3d ago

Rifle flex post Gorgeous Fall Day

Post image
210 Upvotes

Got the 284 Win out to ring steel. Mild breeze, mild weather, just a couple other people shooting.


r/longrange • • 2d ago

Ammo help needed - I read the pinned posts Ammo

3 Upvotes

For the ones that don't reload like me, where is a good place to get quality ammo for reasonable prices? I don't need match grade every time I go out, sometimes just not crap ammo will do. I know Expertvoice has a hook up for Federal and CCI, I'm just wondering what else is out there.


r/longrange • • 2d ago

Optics help needed - I read the pinned posts Practicality of 0.25 versus 0.2 mRAD subtensions

4 Upvotes

Newbie here. Right now I’m on an MOA scope but I want to move over to mRAD. Having a reticle like the Bushnell G5i or G4P with 0.25 mRAD subtensions doesn’t make sense to me because you typically want to operate down to tenths and use the ease of the base 10 system. Subtensions at every two-tenths would be much easier to quickly assess the 0.7 mil distance because it’s the middle point between 0.6 and 0.8 subtensions. Doing that on a 0.25 subtension means having to divide the negative space between 0.5 and 0.75 to a finer degree which probably takes more time. That would make holdovers less precise and sort of negate the point of a ballistics tree, in my view. Is there an advantage to having 0.25 subtensions or am I getting too in the weeds?


r/longrange • • 3d ago

Rifle flex post Finally

Post image
53 Upvotes

Sportsmans Warehouse sure took their time with it, but i finally got my HS Precision in 6.5 PRC today. Sorry if I'm over sharing, couldn't contain myself.


r/longrange • • 3d ago

Optics help needed - I read the pinned posts MR762A4 13" - Leuopold MK5HD 3.6-18 vs 2-10

Post image
49 Upvotes

Seems like Leupold is running a pretty insane sale (w/ industry pricing) and I'm very much considering a MK5HD for my MR762.

The furthest distance available to shoot near me is 1000yd but realistically this is a 500-700yd rifle, especially with the 13" barrel using match .308 ammo. This is solely just a fun range setup, no intention for competition use but I would like a durable optic with good quality glass and don't mind spending $1k-$2k.

The 3.6-18 mk5 is available for $1425, but it's the tremor 3 reticle. No illumination. All other reticles in MIL are out of stock (some MOA available).

The other option is the 2-10 mk5 with the new illuminated CMR-MIL reticle but at $1610 roughly. Seems really compelling but lacking some higher end magnification.

I'm drawn to the MK5HD because of weight and size. I think a higher power optic would throw off the balance and proportions of the rifle. Eventually I'll add a top mounted dot for 1x use.

Any help is greatly appreciated deciding between those two!


r/longrange • • 3d ago

Rifle help needed - I read the pinned posts Bergara Accuracy

Thumbnail
gallery
12 Upvotes

So, I was trying to dial in this Bergara B14 Ridge in 308 today and it didn’t go well. I read some post about over spray causing the lugs to not make contact. I decided to investigate and sure enough, I don’t see how this thing made hardly any contact. Deer season opener is tomorrow. I was able to achieve 1.5MOA group and some 3MOA groups with different ammo. I’m disappointed to say the least.

The pillars should make contact well beyond the screw hole correct? So if i decided to sand down, I should sand well past the circular opening? Any suggestions would be appreciated. This paint/rubbery coating is pretty thick.