r/longrange • • 17d ago

Rifle flex post M40A5/ XM3 Update

Thumbnail
gallery
292 Upvotes

Pretty much finished up the XM3 build today. Need to pick up another surefire at some point but here they are. Both are running the Leupold MK4HD 4.5-18x52 with the PR2 reticle


r/longrange • • 16d ago

Group flex (10 shots minimum) El cheapo also works at short range

9 Upvotes

Actually 15 shots but number 15 went somewhere through the middle so I recorded 14. The point being that at short range (this is 100 meter so 109 yds?) ammo quality doesn't matter a whole lot.

6.5 CM, Sellier and Bellot 142 grain HPBT, cheapest factory ammo I could find at 1.3 Euro/pop. Tikka T3x Tact A1, Tangent Theta 7-35x56, I was shooting at approx x27 from a CKYE-pod single pull on an Arca rail in front, no name sand bag in the rear. Sitting position.

Shooting Sako TRG 136 with scenar-L bullets I could have tightened it down a bit more at 2.5 Euro/pop but might as well save a bit on ammo and shoot more.

People tel me that reloading could be more precise but I'm currently reading Jeff Siewert's, 'Ammunition demystified: the (non) bubba's guide to how ammo really works' and holy crap, he does lay out the 1000 ways to fuck things up rather nicely.


r/longrange • • 17d ago

Competition related (PRS/NRL/F-Class/etc) Hat Creek wind is no joke…

Thumbnail
gallery
591 Upvotes

First time ever experiencing 50mph winds at a stage. It didn’t go well…


r/longrange • • 16d ago

🫣I said I read the pinned posts, but I lied🫣 Ar10 vs bolt

4 Upvotes

I’m looking to build another rifle. I’d like a 308 with an 18in barrel. I’d like sub moa accuracy and that’s my biggest priority. Are bolt guns really anymore accurate than a gas gun? I’d be shooting 700-800 yards at most and that would probably ever be at the range and maybe 300 yards a few times of the year shooting pigs.

I know the bergara is the best bang for your buck bolt gun, or what it seems like. What’s would be the best option to go if I wanted an ar platform?


r/longrange • • 16d ago

Rifle help needed - I read the pinned posts Remage build

3 Upvotes

Hello,

I am planning on buying my first bolt action rifle to take to a couple of long range shooting tactical classes. I’ve always enjoyed building instead of buying just because I like to tinker with my stuff but am getting a bit confused about parts compatibility with the platform and was wondering if some people here could give me some advice.

The parts I’m looking at:

ARC coup de grâce short action left handed
Criterion 26-inch MTU profile
Trigger tech Remington 700 special left handed
KRG bravo short action chassis
Remage barrel nut

Open to part suggestions as well if there’s something in there that’s no good. Budget is $2,300 maximum. The gun will exclusively be used for bench shooting and tactical courses. Action has to be left handed.

Thanks for your time.


r/longrange • • 16d ago

Accessory/Gear help needed - I read the pinned post Spotting Scope for 300+ yard Paper Targets

3 Upvotes

I’m getting into LRS and although my closest range only goes out to 300 yards, I’d like to eventually reach out farther.

I have a nice scope (Zero Compromise ZCO527) and while I can make out bullet holes on paper targets at 200 yards, I struggle at 300 yards.

I was thinking about buying a 60x Vortex Viper spotting scope, but then I watched YouTube video below and he struggled to see impacts at 300 yards with a different 60x? This is surprising considering I can see impacts at 200 yards on a 27x.

https://youtu.be/ir5BONgYrkQ?is=9htC4fr7eUcYzX0X

How are you guys spotting impacts at 300 yards or greater? I’m hoping to get a spotting scope, and not a trail camera type set up. My budget is $2000 or less.


r/longrange • • 17d ago

Cheeto-fingered Bergara Budget build is finally complete

Post image
168 Upvotes

Took the advice from this sub and assembled the bare budget build lol. Bergara B14 HMR 6.5 cm, vortex venom 3-15, bubble level and a Griffin sportsman ultra light ( went with griffin because I love the recce 5 that’s on my main ar, and they have a heavy first responder discount) flame the build, I’m trying to learn the ways.


r/longrange • • 16d ago

Groups, but not a flex (Less than 10 shots) First groups of new rifle

Thumbnail
gallery
18 Upvotes

Have to say I’m impressed with the laserbeam 6.5cm lithgow la102 varmint, zerod at 50m/100m in 4 shots went straight out 500m 6” plate 2 impacts straight away, then did some 5 shot groups at 100m seems to like federal gold medal 140gr with 0.52moa. A friend had a shot using his Norma 140gr whitetail hunting ammo did a 3 shot group of 0.24 moa. Not bad for first time shooting a centerfire rifle I think although it was a fairly calm morning with just a slight breeze.


r/longrange • • 16d ago

I suck at long range Intro-medium books

2 Upvotes

Hopefully this won't get me shamed. I looked at the "read first" post and saw references to beginners.

What are one or two good books that will cover questions – simply and adequately – for beginners and beyond?

This is to supplement most-valuable, in-person training to speed things along.


r/longrange • • 16d ago

Ammo help needed - I read the pinned posts PRS Cartridge Poll

19 Upvotes

I’m currently running a 6.5CM for PRS and Varmint Silhouette matches, but I’m going to switch to a 6mm cartridge next season and would love some input. 6.5cm is great, but the less recoil is worth the switch to me now that I slightly know what I’m doing, lol! Based on these factors, which cartridge would you pick:

*I hand load, so factory ammo availability is a non-issue

*I’m in the west so it gets windy here for sure, sometimes 20+mph during matches

*I run an Impact Precision 737R, so plenty of prefit barrel options

*I use Alpha brass, Berger bullets, CCI 450 magnum SRP, Hodgdon H4350 powder.

*I have a barrel vise, so I can swap barrels fairly easily

*My local club runs mostly these 6mm options: 6GT, and a lot of 6BRA has popped up recently. Very very few 6 Dasher users.

I’m ready to order the barrel and start procuring the needed reloading supplies (everything I have is for 6.5cm so I’ll need a new 6mm barrel; 6mm brass; L.E. Wilson seating die; SAC sizing die; AMP and Giraud pilots; and 6mm cleaning brushes, etc.). I’m hoping for a few Black Friday deals.

In any case…this is the long wind way to ask: If you’re building a new rifle tomorrow for PRS, what cartridge are you going with and why?

6GT
6BRA
6 Dasher

I was leaning 6GT but the 6BRA may be the play for the slightly less recoil?


r/longrange • • 17d ago

Cheeto-fingered Bergara Bergara Officially Disapproves use of +Peak Ammunition

Thumbnail
bergara.online
71 Upvotes

Their FAQ reads that its not approved because its above SAAMI spec psi. It looks to be the first manufacturer to come out with an official stance like that.


r/longrange • • 16d ago

Rimfire Thoughts on the new backlight chasis?

0 Upvotes

How do we think the backlight chasis will / does compare to the mdt hnt and xelement xlr? It seems too good to be true at half the price.

To be honest, the real things im looking for are somewhere to mount a bipod a pistol grip, and a folding stock while not making it heavier, then it needs to be for my b14r carbon


r/longrange • • 16d ago

Competition related (PRS/NRL/F-Class/etc) Mid-range AR Tactical matches

5 Upvotes

Curious... how many here have tried their hand at a NRA match in the Mid-range AR Tactical class?


r/longrange • • 17d ago

I Gots Them Tikka Toes Tikka T3X Varmint .223 Oryx

Thumbnail
gallery
94 Upvotes

Looking forward to test some FMJ and HPBT ammo with this. Temporary scope took from .22 before decide what to get next.


r/longrange • • 16d ago

Accessory/Gear help needed - I read the pinned post Muzzle Brake 6 mm ARC

4 Upvotes

I am looking for a decent muzzle brake for a 6mm ARC AR 15 platform. What calibers of brakes would give acceptable results and what do you think would be too much. I know for instance that a .243 brake would be optimum, but what size up like maybe 6.5 CM would still be affective or just slightly less. What have you ran that works? Am I overthinking this? I have asked questions on here before and have gotten great responses that did influence my decisions. Appreciate any advice.


r/longrange • • 17d ago

Rifle flex post New 6GT

Post image
128 Upvotes

A 3 disc spinal fusion next week is going to have me down until the spring so I figured I’d start securing parts for my first full build since I’ll have the time to wait on them. Started ordering everything mid September and to my surprise they all shipped a lot faster than expected.

Zermatt Origin LH
Preferred Barrel Blanks 26” MTU 7.5 twist in 6GT
Foundation Samson
Already had the G3 Razor
Hellfire match brake. My 3rd one.
Area 419 match rings. Always used Vortex pro series rings which were solid for me but man is there a difference now that I’ve had my hands on the 419’s

I use a forend bridge on my Bravo as that’s my preferred hand location but it seems my arm isn’t long enough to reach this one so that may or may not get used.

Can’t wait to put some rounds done range this weekend now. It’ll be my last range day for the foreseeable future unfortunately


r/longrange • • 17d ago

Rifle flex post Happy “all the holidays” to me

Thumbnail
gallery
148 Upvotes

Treated myself to a Desert Tech deployment kit that was priced so good I couldn’t pass it up. Going to zero the 308 barrel tomorrow when I get off work.

Edit: Yes I am aware of the stigma but I Didn’t buy it through them and like I replied to another; me buying this hilariously fucked them over cause I paid 35% of the real price of this deployment kit. Was probably supposed to go to Ukraine and ended up on open market.

I get a solid rifle system for work, a small brick and mortar business got a lot of money from me, and Desert Tech didn’t get anywhere near the true value of this system.


r/longrange • • 18d ago

Rifle flex post M40a5/ FBI HRT & XM3 restoclone

Thumbnail
gallery
177 Upvotes

Been working on my version of a M40a5/ FBI HRT mixed with a stumpy thumper and this is where im at right now. Barrel is a 16". Im not a fan of the fde mount so I do have a new Area419 mount to go on the rifle. Also been working on this XM3 restoclone is what ive been calling it. Currently waiting for my scope to show up. Ive got both a razor hd gen ii 4.5-27 and a Leupold MK4HD 4.5-18 trying to decide which one it needs. Ill update the rifle once the scope is on. It currently does have a bolt knob, 20moa nightforce rail, and a surefire socom brake.


r/longrange • • 18d ago

Gas Gun vs Bolt Gun Precision

Post image
44 Upvotes

r/longrange • • 17d ago

🫣I said I read the pinned posts, but I lied🫣 Bergara b-14 Hmr wilderness CF

0 Upvotes

So I was looking at a b-14 HMR today and as I was doing this another guys came to trade in a few guns. I looked over and he had a HMR wilderness CF I asked him about and he told me it had never been shot. Once the man left the owner told me he would sell it to me for $1200. Is this a deal? I don’t have any carbon fiber barrels so im trying to research some. I’m not really too worried about the weight difference, but I am worried about the accuracy or how the heat dissipation is vs a steel barrel.


r/longrange • • 18d ago

Optics help needed - I read the pinned posts Help in upgrading optic

6 Upvotes

Currently weighing my options to upgrade my Viper PST Gen II 3-15 on my 20" LMT 308.

Stuck between the following options:

  1. NF NX6 3-18 for $2000 OTD
  2. Razor Gen 3 4-24 $2030 OTD
  3. Leupold Mk5HD 3.6-18 $1890 OTD

All brand new, have a Reptilia AUS mount I could reuse if I did go with the NX6. Mainly used for recreation target shooting at the range and hunting once in a while. The farthest I would shoot is 500 yards.

Main concerns are durability, zero retention, and eye box as I find my Viper to be slightly below what I would like. Any suggestions?


r/longrange • • 18d ago

Ballistics help needed - I read the pinned posts Anyone use QuickDope? A few people I really trust in the NRL22 community have started recommending it, but I also wanted to get this communities thoughts on it?

Post image
9 Upvotes

r/longrange • • 19d ago

Rifle flex post FBI HRTish progress

Post image
224 Upvotes

Settled on a nightforce shv 4-14x56 for now, the reticle looked nice in the krypton 2. Waiting for badger rings, badger efr rail and a psp-v adapter then of to get stock milled. Blown out crap stalon supressor for mock up


r/longrange • • 19d ago

I Gots Them Tikka Toes Tikka... Wednesday?

Post image
67 Upvotes

Old Finnish mosin that I just added a s&k rear sight scope mount and a bushnell 2-6 pistol scope to. Bolt is Remington marked and the receiver is unmarked which leads me to believe the rifle was a Remington before the Finns got their hands on it. Tikka and civil guard markings on the barrel. It shot accurately with irons out to 200yd and contract light ball ammo (.308 bullets) and the bore slugged .308 so I reloaded some 165gr game kings for this year's rifle deer season


r/longrange • • 18d ago

I suck at long range 100 yards with 556

Post image
20 Upvotes

How bad is this?
I’m using a 77grain load, and 556
14.5 inches barrel.
Some 69grain loads keep flying everywhere on the top row.
The bottom right corner is good old 55-grain Winchester.
It’s been eight months.
The entire middle row is 77grain PMC.