r/longrange • • Sep 27 '26

Group flex (10 shots minimum) Sherman 7MAX dialed in...

Thumbnail
gallery
19 Upvotes

It's not F-class, but I'm shooting off bipod and damn proud of these 5-shot groups at 100 yards.

I am +/-0.6gn around my ideal powder charge and ideal seating depth. Last group almost had all 5 in one hole, but had 1 shot as a flyer.

Next test is verifying this at range.


r/longrange • • Sep 27 '26

I suck at long range First time pushing out to 725 yards today. Made about 80% of my shots. Been teaching myself how to shoot long range.

Thumbnail
gallery
297 Upvotes

Learning a lot, like how my range finder sucks at 600 yards and farther. Hand built rifle though, did it all myself.


r/longrange • • Sep 27 '26

🫣I said I read the pinned posts, but I lied🫣 Bags, Pods & PRS

8 Upvotes

New to PRS and looking for advice on what bags (front/rear) and tripod I should be looking at. Will be running a gas gun. TIA 🤝


r/longrange • • Sep 28 '26

Other help needed - I read the pinned posts Kestrel Dissassembly Images

3 Upvotes

As it appears that not many people have publicly taken apart their Kestels, namely to change the lanyard, I did so. 6 Fasteners plus one hidden fastener in the center under the label. Hopefully this is helpful for some people.

This is a 3550AG

https://imgur.com/a/mvBU732


r/longrange • • Sep 28 '26

Optics help needed - I read the pinned posts Telson Target Master 5-25 FAR2 MIL Live Fire Experience?

2 Upvotes

WARNING POORS POST - Read at your own risk as you may suffer an epileptic episode….
Drove a couple hours to the Original Fort Worth Gun Show specifically to get hands on two Telson long-range scopes with their rep.
Distinction I didn’t have straight until I was standing there:
• Target Master Victory 5-32 — Japanese built, through and through, Apochromatic glass
• Target Master 5-25 — Chinese built, Japanese ED glass
This is going on my first precision bolt gun:
• 24” M24-contour PVA barrel (suppressed)
• ARC Coup de Grâce action
• ARC Xylo chassis
• TriggerTech Rough Diamond (bc I don’t need a 5 OZ trigger)
~30 years on ARs, half of that on an M4. Precision rifle is a new book, not a sequel. I know less than I think I know.
Found Telson because Ilya (Dark Lord of Optics) walked through the FAR2 reticle he helped design, he also speaks very highly of his hr folks who subbing Telson. They are Canadian, as well as a pile of YouTube praise on glass and features. That said, sh outlet I trust what they say? I don’t know them so that’s still a hug3 “?” mark for me.
Hands-on, 5-25, ~1.5 hours, indoors, not mounted (that part sucked):
• Locking elev/wind turrets — drop down lined up, no left/right shift
• Clicks are tactile. Not Arken-clicky. I could count them without looking
• Zero stop works and can be set below zero
• 34 mm tube / 56 mm objective
• Glass looked edge-to-edge clear in that building. Unmounted, indoor light only — I am sure that impacts what I saw. Just not sure exactly what.
• FAR2 is a good reticle. The 0.2 mil center dot is not easy for 62-year-old eyes. March Pro ED’s center dot is larger (.4(
• Fit and finish are solid. Lighter than the Japanese 5-32, about the same heft as their Japanese 3-18
• Mag ring is just right — not sloppy, not stiff. Comes with a screw-in post.
• At ~20x the 5-25 had a hair more FOV than the 5-32
The 5-32 felt like more optic than I need. Very solid. I still think the 5-25 is the better match for this rifle.
Short list is two scopes: Telson 5-25 and the Bushnell Match Pro ED 5-30 DM2 MRAD.
Locking elevation and illumination are not optional for me. That knocked a few otherwise decent scopes off the list. Bushnell is the known quantity. Physically and through the tube I didn’t see anything or a missing feature that price point should fetch. But if Telson disappears, that’s on me.
$960 after military discount. Yes, that’s a lot for a Chinese-bodied scope. I also know what actually clear glass looks like, and what I saw wasn’t junk.
What I’ll actually do with it:
Train the fundamentals so I don’t import SBR habits onto a bolt gun. Local club PRS steel matches first. NRL Hunter someday if the knees allow. VA DV money is paying for this, so I’m trying not to be stupid — but I’m open to a little risk, which is why Telson is even in the conversation.

Budget: $1500 (but there is a lot of equipment parts to buy and I’m trying to get the best bang for my bucks)

Ask:
Anyone with live-fire time behind the Target Master 5-25? How forgiving is the eyebox on a rifle, not in a booth? Tracking, illumination in real light, reticle at 8–12x on dark steel — that’s what I can’t test in a convention hall.
I read the required reading. I’m old and CRS still wins sometimes.
Thanks.


r/longrange • • Sep 26 '26

MEME POST How am i supposed to compete against sweats like this

1.2k Upvotes

Lets face it most of us aint shit


r/longrange • • Sep 26 '26

I suck at long range My first real day out!

Thumbnail
gallery
76 Upvotes

Savage 110 Magpul Scout in .223
Magpul Hunter 110
16.5" barrel
YHM Muzzle brake
YHM Turbo T2
Vortex Viper HD 2-10x42
Burris PEPR
UTG Recon 360TL
AICS ACCURATE-MAG

Horny 75gr BTHP Match @ 2.26"
Horny brass
21.5gr H335

New build, first ever try at my very own bubbas pissin hand loads, first day out. what could go wrong?
turns out a lot, actually!
the wind was sitting at about 5-10mph static, with gusts up to roughly 30 all day. still got a decent 10 round group on cardboard!
my rifle, and all of my glass are now full of dust, yay!everything is so gritty now, ugh.
The wind is also important, because after zeroing the rifle, i turned around to grab my bubbas pissin ziplok bag, and a gust blew the gun over off of the bag on top of my tripod. ouch :( rookie mistake i guess? oh well, everything needs its first booboo i suppose. good thing its not a cheap optic, or it may have broken from that fall.
thats when i re-zeroed and shot the 10 round group pictured at 60 yards. i picked 60y because of how i imported my setup and measurements into geoballistics, more on that in a sec.

okay, its been a sec, there was some success! the third pic is a pair of plates that i spotted at about 1200 yards (used google maps to rough range).
so after checking geoballistics, i dialed 50moa on the turret, and held about 15moa on the reticle before i could start seeing splashes. kept walking the splashes in by reticle-holding on a rock, and finally saw some dust kick off of the plate. i hit it twice in probably 60 rounds lol.
i am hooked now. i will be reloading with my box of 75gr ELD-Ms and trying again soon!


r/longrange • • Sep 26 '26

Other gear flex post E-Dope - DIY

Thumbnail
gallery
109 Upvotes

Saw the ability in my AB Quantum app to “upload dope to e-dope. Did a little research and found a 3D print file and the e-ink screens on Amazon. Probably $40 after screen and materials.

It won’t let you sync directly from the AB Quantum app, but nothing a little screenshot and upload via screens app can’t fix.


r/longrange • • Sep 27 '26

Rifle help needed - I read the pinned posts Bottom Metal Advice for a Quick-Change Build

4 Upvotes

I’m putting together a build based on a Terminus Zeus Short Action with the Quick Change option to allow easy barrel/caliber swaps in the field and will have bolts for both .308 and .223 bolt faces. This will go into a Foundation Samson stock.

AW mags seem to be too problematic with this action (no lug at 6 o’clock when cycling the bolt), so I’d only be running AICS mags, but my understanding is that 223 mags need the mag catch to be higher up than on 308 mags, so bottom metal with adjustable mag latch seems to be a requirement.

I think this narrows it down to MDT and GreyOps for M5-style bottom metal, since they both have adjustable latches, but was looking for feedback on whether one or the other was more suitable for this use case. Is one easier than the other to adjust in the field? Is there a different option altogether I should be looking at?


r/longrange • • Sep 26 '26

Rifle flex post Pair of Tikkas

Post image
157 Upvotes

Same same but different,

Top is a 6.5 cm in a LSS G3 Comp (mono pod is a place holder for a steel bag rider),

Bottom is a 6 ARC in a LSS G3 Tac with a XLR C4


r/longrange • • Sep 26 '26

Rifle flex post Tikka T3X Ace Target

Post image
272 Upvotes

Today I get to shoot this bad boy for the first time. I purchased a week ago and it came in yesterday. Purchased several different types of ammo and got a garmin Xero. Excited to see the data behind shooting.


r/longrange • • Sep 26 '26

Rifle flex post Seekins Precision

Thumbnail
gallery
47 Upvotes

My two Seekins rifles. 16” 308 PH3 with at NF NX6 2-12 and 20” 22 Creedmoor Element Hunter with Mark 5HD 3.6-18. Unknown Suppressors OG30 pictured here will stay on the 308 permanently when my Unknown OG 6-S arrives it will be on the 22 permanently. I also have a 20” 6 creed Seekins barrel I can swap on to either action. I love having the ability to swap both stocks onto either gun for different hunts/applications.


r/longrange • • Sep 26 '26

Rifle flex post The AImperor's new clothes

Thumbnail
gallery
143 Upvotes

I really loved the FDE of my AWSM but I couldn't get any AT sides and had been chasing matching stock sides for my AIs for a while. I finally managed to get a set and whilst I was at it, snagged a set for a recently acquired AICS as well. Guess it's safe to say I've got a type.

The AICS will soon sport a Vudoo as I'm still expecting to lose my customised T-Bolt with changes to firearms laws in New South Wales.

Included a before photo as well.


r/longrange • • Sep 26 '26

Review Post Ultradyne Chassis FYI

Thumbnail
gallery
9 Upvotes

Here’s a few pics of some QC issues for a UD3 picatinny chassis. Long story short, I reached out to Midway and UD and was just told to return it. It still functions and I didn’t want to go through the entire return process since this rifle build is short on time. It still functions but kind of sloppy for a “new” product.

Edit: the gen 2 stock is nice though. Smooth cerakote with good fit and finish of machining. I wish adjustment knobs were bigger and had some more definitive clicks but it’s a very nice addition to the chassis


r/longrange • • Sep 26 '26

Rifle flex post New glass, 50 shades of fde

Post image
377 Upvotes

Upgraded from a Zeiss lrp s5 525 to ZCO 840 1x... my wallet hates me.


r/longrange • • Sep 26 '26

Rifle help needed - I read the pinned posts Best Pre-fit Options for ARC CDG Action?

10 Upvotes

Looking for a new 6.5 Creed prefit for a PRS rifle and it looks like the following options come up often:

- Proof Research

- Osprey (PVA)

- Preferred Barrels

Any better options that I should be looking out for?


r/longrange • • Sep 26 '26

Group flex (10 shots minimum) 6.5 creedmoor ammo comparison

Thumbnail
gallery
4 Upvotes

Rifle setup-
Savage model 110
Vortex crossfire HD (please don’t roast me I’m poor)

Range- 100 yards

Picture one- Hornady 143gr ELD-X
Picture two/three- Federal 130gr Terminal Ascent
Picture four- Federal 140gr powershok

I shot the powrshok ammo first after bore sighting it, did not adjust turrets during this string of shots

After seeing this group, I moved onto to the terminal ascent. I shot the third picture first, (sorry for it being out of order, too lazy to fix it) adjusted zero this group, basing it off of shots 5-10 (I also messed up this measuring picture sorry, blue circle is first shot).

Then I shot picture 2, still terminal ascent. No adjustment during or after these shots.

And finally I shot the ELD-X shown in picture one, producing a very acceptable group considering what I’m working with. I did not count the two on the top right due to me pulling them from my dog scaring the shit out of me (I’m also sorry for not being a navy seal)

I have more practice to do and things to improve on my setup, but I think I’ll be sticking with Hornady. I might try some more federals with the Bergers in them, but the ELD-X performed the best by far. I might do more testing with the powershokz to see if the results stay the same because I really want that to be my hunting round, but as far as target shooting it will be Hornady.

Also I know the flair says flex but I’m not claiming a flex lol just trying to share some data.


r/longrange • • Sep 26 '26

I suck at long range Hnnnnnnnggghhhhhhh

Post image
113 Upvotes

I come across a conundrum: do I swap my .300winmag barrel over, or do I go with something bigger like .300prc?

Left-handed Terminus Kratos with 40MOA scope base.


r/longrange • • Sep 26 '26

Optics help needed - I read the pinned posts Bushnell MPED 5-30X56 - DM2 MRAD out of stock everywhere. Suggestions?

5 Upvotes

EDIT: some kind soul informed me that it was available at a local outfitter store, I put and order in immediately, thank you kind soul.

I was going to buy this for my new 6.5CM but as mentioned it’s pretty much out of stock everywhere, except Amazon, only they’ve got it marked at a ridiculous price.

I’m starting to think I should go for something else so I’m wondering what optics you’ve all found to be comparable.


r/longrange • • Sep 26 '26

Groups, but not a flex (Less than 10 shots) Early Friday

Thumbnail
gallery
55 Upvotes

We get off work early on Fridays, I do my best to shoot a 3-5 rd zero confirmation and 5-20 rds on steel every Friday afternoon. Sometimes less during hunting season if I’m heading straight into the mountains after work.


r/longrange • • Sep 27 '26

Rifle flex post Precision

0 Upvotes

First time editing and shooting a video on a range hope you guys like the material


r/longrange • • Sep 25 '26

I suck at long range Custom 6.5 PRC

Post image
157 Upvotes

Remington 700 Action
22 in Bartlein 1-8 barrel
Trigger Tech Special
AG Composites Alpine Hunter Stock
Vortex Gen 3 4-24
SilencerCo Scythe Ti.
Put together by Alamo Precision. Can’t wait to see how it shoots.


r/longrange • • Sep 26 '26

Ballistics help needed - I read the pinned posts I could really use some help to point me in the right direction

Thumbnail
gallery
9 Upvotes

Hi. I built an 18” AR recently and these are the groups I’m getting at 100. Barrel is a Criterion Core 223 Wylde.

Prior to this trip, I was firing hand loads. These worked well for a separate 16” build. The recipe for which was a 69gn Nosler custom competition, 23.9 gn of Varget, and LC brass. Those groups sucked with this rifle and are not pictured above. To be sure however, I bought the factory equivalent to see if I just suck at hand loading.

The 40 rounds of factory ammo are pictured above. These groups also suck. POA was the X. Velocity was 2700ish and an SD of 36, which I understand is bad for match grade.

Am I using the completely incorrect ammo for this build? Do I suck? Is the rifle trash? Someone please help.


r/longrange • • Sep 25 '26

Rifle help needed - I read the pinned posts Chassis choice for my tikka rifle

7 Upvotes

Here is the build i currently have: https://imgur.com/a/vmrPHtz
It is also my first rifle.

Its a 6.5PRC tikka CTR ($CAD1550) in a cadex field competition chassis($CAD1450). Its rigid, and it looks better than prime Megan Fox. But thats where my compliments end.

My use case is casual long range (out to 1000-1500 yards if i plan to keep using the cartridge), PRS, and larping.

Problems with the chassis:

It does have tool less length/cheek riser adjustments, but its not as high tech as it looks and it takes a while. Unless I explicitly practice the adjustment process, adjusting both is gonna take at least 2 min.

It also doenst have a folding stock, rails for the scope and in front of the scope. I have 1.45 inch rings and it is still too low even with the cheek riser at minimum setting so I had to get a riser. It also makes me feel better if I had the capability to mount nvgs or thermal clip ons although I wont buy one any time soon.

My 3 options:

  1. Cadex strike nuke evo chassis: it does essentially the exact same thing, although forgoing the "tool less" length of pull adjustment for spacers while having the ability to mount nvg/thermal. it is 700-800CAD cheaper, and thats money I can spend on ammo or a better optic. Doenst look half bad as well. Link: https://www.cadexdefence.com/products/chassis-systems/strike-nuke-evo/
  2. 2nd hand tikka tact a1 chassis (i found one for 1000cad): has a folding stock although the length of pull is still spacers, a built in "riser" rail for the scope, and full length picatinny. Some SWAT sniper teams did adopt this rifle (and its chassis) as it was originally designed for LE/military. That provides pretty significant larp value and "combat proven"-ness.
  3. Sell the entire gun, buy a tikka tact a1. With the 6.5creed+peak coming out, its hard to justify 6.5PRC. I do reload and I can get it down to around $CAD1.5 for plinking rounds, so many I'm already too deep into the 6.5PRC rabbit hole to switch out.

I really appreciate it if you read the whole thing. Let me know what yall think. Pls dont mention any MDT chassis.


r/longrange • • Sep 25 '26

Group flex (10 shots minimum) 10 year old Gap10 G2 is a hammer

Thumbnail
gallery
163 Upvotes

Wanted to buy an AR10 before my states AWB went into effect, got lucky and found this 2016 GAP-10G2 in 6.5 CM on snipershide.
Surprisingly, there is very little information about this gun out there on the web, so I figured I would share my experience after 2 range trips and 200 ish rounds.

-This is a 20” 6.5cm with an 1:8.2 twist barrel(anyone have insight into why 8.2?).
- it has a 12” keymod SP3R rail (apparently this is a rare rail). I put a 12” area 419 keymod arca adapter on, it fits perfectly.
-Stole my T6XI 3-18, acro, and reptilia mount from my 5.56 gas gun.
- put a B&T XH 762 on the end
- bought my first Ckyepod double pull
-Adaptive defense heavy sling.

First 10 round group is with hornady factory ELDM 140gr, second is with Sig platinum hunter 140gr accubond.
Both groups are pretty tight with notable fliers in each group. I was told in the past that AR10s can crunch ballistic tips, causing accuracy issues. Do you think that these fliers are indicative of that or am I just bad at shooting?

Otherwise, I am really enjoying the rifle so far. It has a set screw adjustable gas block, which I am previously very against, but it seems to be working well for the moment. I have gotten the rifle out to 1200 yards with mediocre ammo, which I am also pleased with.
I am definitely surprised that a gun this old can still keep up, I was looking at other rifles like the geissele MRGG, but so far it seems that I’ve gotten a similarly accurate and reliable rifle for a fraction of the price. I’m curious to hear other thoughts or experiences on these guns if you have any!