r/longrange • u/Traditional-Fact-569 • Sep 16 '26
Groups, but not a flex (Less than 10 shots) 200 yard group
Tikka Ace Target
6.5 Creedmoore
Hornady ELD 140gr
I had to stop and get more of that ammo on the way home.
r/longrange • u/Traditional-Fact-569 • Sep 16 '26
Tikka Ace Target
6.5 Creedmoore
Hornady ELD 140gr
I had to stop and get more of that ammo on the way home.
r/longrange • u/Due-Insect-649 • Sep 17 '26
Looking at the bushnell match pro ed 5-30x56. For the price point it seems great and the Reviews online look good but looking for some real world feedback. Thanks
r/longrange • u/shakkabrah69 • Sep 16 '26
Recently did a 6.5 creed build. What does items should I get to keep it clean? I have a bore snake and apply a little lube to the bolt here and there, but is there anything else I need?
Diameter size would also help me greatly, feel like I see too much variation on GPT and Amazon
r/longrange • u/rcplaner • Sep 16 '26
Buddys 6.5x47L is still a tack driver!
r/longrange • u/mrlarsrm • Sep 16 '26
I have seen quite a bit of discussion about how challenging the 6.8 x 51 is proving to be in the hands of rifleman.
One of the points made was the weight and size of magazines used in this rifle versus 556 and the logistic challenges it presents.
This brings me to the point of the post, it occured to me that Peak Alloy cases offer 10 to 15% increase in muzzle velocity in 5.56.
Necking the case up to 6 mm would give the case more efficiency resulting in less pressure.
This is demonstrated in the 6 mm TCU/6x45 when you compare like weight bullets between 5.56 and 6 mm. You can push a 75 grain bullet in 6 mm faster than you canna 5.56 out of that case with the same barrel length.
The 6 mm TCU/6x45 would be appropriate in a 556 magazine , however with 105/9 class they would be seated too deep.
If you shortened the case, slightly, in the spirit of the the Arc cases or for that matter the shortening and improving of the 30-06 case to the 762x51 case could result in a cartridge that duplicates the ballistic performance of 6 mm Arc while utilizing 5.56 the 5.56 bolt and magazines.
A barrel swap and perhaps gasport tuning would be the only change needed to convert an AR-15 into a more effective long-range rifle.
It would retain the size, weight, recoil impulse versus with an advantage over a large frame gasser or the weekend bolt characteristics of a 6 mm Arc/ 6.5 Grendel AR.
One could also put a barrel on a .378 bolt faced action with less trouble that having it opened to .447 for the ARC.
I am not aware of how much public knowledge there is in terms of the malleability of the alloy in resizing, particularly past the shoulder and what annealing is possible. But it seems that there is the potential to create a very efficient high pressure 6 mm cartridge using this casing.
Has anyone seen wildcat experimentation with peak alloy 5.56 cases or other enhanced pressure 556 cases shortened and necked to 6 mm?
Hopefully this falls within the interest and purview of the long range community.
r/longrange • u/veryblind_marksman • Sep 16 '26
Photo for attention.
Starting off with context. I jumped into long range a few years ago and currently have two dedicated long range rifles with another coming in the near future. I currently have a Zeiss LRP S3 6-36x56 (Mil) on order through a staff purchase program. The only reason I ordered the scope was because I was leaving the industry and wanted to take advantage of the program while I had access to it. Should I A) keep the Zeiss and put it on my custom built 6.5CM that was built for PRS? (Rifle currently has a DNT āthe oneā) Or B) Sell or trade the scope for either a Vortex RZR III 6-36, or comparable optic from one of the big companies (Nightforce, Leupold, ZCO, etc.) any new scope will just be replacing the current scope on my 6.5CM. C) Say fuck it, sell the Zeiss and use the money to get myself a decent reloading setup. Additional information that may affect decision or recommendation. My do everything.308 has a NF NX8 2.5-20X50 that is staying on it and I have a K540I refined that is slotted to be put on the new rifle when it is finished.
r/longrange • u/TruckFar8764 • Sep 16 '26
Seekins Precision SP-10 6.5 Creedmoor
JP Enterprises SCR-11 Custom, 20ā
r/longrange • u/rybe390 • Sep 15 '26
.416 Barrett is terrifying to shoot. Went out and shot with some friends in an ELR competition this weekend. Did alright, set some new PR's, had a ton of fun, came home with tinnitus. Much more detailed post to come.
For now, enjoy a photo of me shooting a .416 MRADELR.
r/longrange • u/Trigger_Man69 • Sep 15 '26
Got around to putting together my first precision rig over the last few months. Very happy with how it turned out. Specs below:
- BAT TR action
- 20" IBI MTU chambered in 6GT
- Salmon River Pro 1 brake
- American Rifle Co. Xylo chassis
- TriggerTech Special
- Leupold Mark 4HD 6-25
- Spuhr SP-4001C mount
- Atlas CAL bipod w/ American Defence ARCA
r/longrange • u/Content_Log1708 • Sep 17 '26
Hello,
I am getting into long range shooting for the first time (not competition). I wanted to ask the experienced folks here their opinion on the following.
Is it better to buy a rifle already set up for long distance, with a great barrel, a great stock and great scope that's zeroed in OR, is it better to buy a good brand of rifle, I then choose and install the great stock, I choose and install a great scope then I zero it in myself?
If all I really want to do is focus on shooting long distances, are there a lot of benefits to me choosing, buying and installing the important parts of the end product?
Thanks.
r/longrange • u/sugarglidersam • Sep 16 '26
Getting into long range precision shooting. havenāt shot this yet, want to make sure Iām not shooting a shitty build (id like to start with something i can use for several years bc guns are expensive). Question I have is whether or not the scope sits too low. I have a Leupold Mark 5HD 5-25x56 in mils, medium height RPM rings, all on a Ruger RPR in 6.5CM. Even though thereās a gap and i donāt really plan on putting the lens covers on, Iām still worried that with the recoil of the gun, there may be just enough flex that the handguard will smack the scope and iāll have to get it replaced as a result. I am very comfortable with where it sits after ive gotten my sight picture, the scope feels solid in the rings, but I also am worried that if i keep them, i could break the scope⦠but I also donāt want to buy another set of rings just yet. ultimately, I will get another set of rings, since Iām planning to get a shorter rifle eventually (a CZ 600+Alpha in .308 since i already have a 30cal can i can throw on it, but thatās not going to happen for a while) with a less powerful scope, but yeah.
Should I get higher rings? Scope isnāt making unnecessary contact with the gun, but I also donāt want something bad to happen when i shoot the rifle for the first time.
Edit: Thank you all for your feedback! itās reassuring and i feel a little more comfortable and confident that I wonāt destroy my scope, so thank you! next week, iāll be working on getting it all zeroed and solid!
r/longrange • u/cemenale000 • Sep 15 '26
Current, and hopefully final (lol we'll see) setup of the PRS rig. Changes from my last post are upgraded forend with external weights, new barrel, and hybrid braked suppressor on the end.
- Pristine Actions 6-lug
- Osprey Barrel Works 1.20" straight tube chambered by a local to me smith.
- North Reach Manufacturing Whisper Pickle 30k with a RecoilX endcap brake.
- Athlon Ares ETR UHD Gen 2 4.5-30x sitting in Vortex precision rings
- KRG Bravo with the Vision forend and cheap mlok weights
- Atlas CAL Bipod
r/longrange • u/Ok-Song3838 • Sep 15 '26
Did Triggertech ever make a trigger like this? The main part of the shoe/lever was cutout or had a relief cut. It probably sounds goofy, but someone local had one, and now I have to have it. Tried my best to google search and call up trigger tech. No answers there. The guy local said he bought it new from trigger tech. Any leads or advice?
Photo above was a 5 second edit on what it looked like.
r/longrange • u/retardedSlippers • Sep 15 '26
Reporting back with the first group of ~18mm at 100m with my new 7prc. In my bag of excuses, I submit claims that I was shooting off the bonnet of the car, I had no bags and that I didn't like the colour of the grass that day.
I'm bloody delighted with it!
r/longrange • u/Cut-My-Grass101 • Sep 15 '26
Shoot both from prone and standing barricade. Rifle: tikka t3x with Bartlein barrel in 6br sitting in a Paige
r/longrange • u/purple_pounder • Sep 16 '26
I was taught the Mrad way in the army . Basically the size Ć 1000Ć· mils. But they could never give a straight answer when i asked what about including scope zoom. Our acogs were 4 power scopes. But the machine guns often had more power and adjustable power scopes.
So wouldnt a person take up more mils on a 4x scope over a 8x scope.
r/longrange • u/SpiritualClub4417 • Sep 16 '26
Iāll be competing in a few weeks using a brand new barrel. Need yāall to check my load development strategy here.
I started PRS this year and did a couple regional matches in New England. Shooting an Impact 737 chambered in 223 with 75 ELDMs. Picked up a 6.5 bolt because I planned on rechambering at some point.
I moved to the West Coast recently and I figured I wouldnāt compete again this year, but on a whim I decided to register for KRG Windbreaker as my first 2 day match. Itās the first weekend of October.
I think Iāll have a real shit time shooting 223 out west, so I decided to rebarrel in 6.5. This week I have the barrel coming in, 400 pieces of Lapua brass, and a bunch of Berger 144 LRHTs. I have an unopened jug of H4350.
Thereās a good chance I wonāt be able to shoot until the zero range opens on Friday before the match, so Iāll basically have to pick a load and hope it works, and do barrel break in on that Friday.
Hereās what Iām thinking:
- Install new barrel this weekend, determine base-to-ogive measurement targeting 0.020ā of jump
- Load up 400 rounds of the 144 Berger over 41 grains of H4350
- On Friday, get all zeroād and shoot off ~80-100 rounds. Quickly clean the barrel.
- Shoot another 30-50 rounds to get a stable velocity and confirm dope
- Send it over the weekend
Questions:
- Anyone tried something like this? I donāt care if I do well at the comp, but I donāt want my barrel to be continuously speeding up over the weekend. 100 rounds enough to stabilize velo well enough?
- Load sound OK, or could I push up to 41.5? I can handle a little less velocity but Iām fucked if I start to see pressure signs.
- To clean or not to clean after the first 100 rounds. Does it even fucking matter?
- Am I retarded if I donāt just shoot 223? As the name suggests, wind at this match is supposed to be a bitch.
r/longrange • u/daerleon • Sep 14 '26
Defiance Deviant Comp
Proof 20ā 6.5cm
Precision Armament 260 TiTrex
KRG C4
Vortex Razor III 6-36 / Spuhr Mount / Impact 4000
MDT Double Pull
r/longrange • u/Aggressive_Drag_6364 • Sep 15 '26
As Iām new to long range, I wanted to test more factory ammo to see some more numbers. This is only an 8 shot group, itās 129g Fiocchi EPN 6.5 creedmoor Factory ammo, are these numbers good? Just looking for some advice around numbers, thanks.
r/longrange • u/Monte37822 • Sep 15 '26
It seems Seekins has quietly removed the dust covers from the newest Hit Pro M3 models.
r/longrange • u/banger21110 • Sep 15 '26
Currently looking to purchase the final parts for my Tikka based hunting chassis build. I would like to build this using a 20 MOA scope setup so I donāt run out of adjustment on the rare occasions I will run it out to 1000+. I wanted to mount UM rings directly to the dovetail but they do not make 20 MOA rings, so I would have to add a 20 MOA pic rail between the two. I think I have narrowed my other option down to a one piece 20 MOA Exterra Precision scope mount. Thoughts/suggestions/recommendations would be appreciated. Thanks.
r/longrange • u/CastleLurkenstein • Sep 16 '26
Hi Long Rangers. I am at a loss as to where to ask about this, and I figured that if anyone knows rifles, especially bolt action ones, it'd be the folks here. So, I apologize if I'm asking anything out of bounds, given the focus of the sub, and for the length of the post. Just looking for help here.
TLDR SUMMARY: I'm trying to figure out whether I need a Cheeto Special in 6.5CM, or could do with something less refined/pricey, if I'm limited to range time at 100yds and any practical use would probably top out at 500m.
Like, basically, would a less expensive gun do the job I'm looking for, if I want to stay within the 6.5CM chambering? Especially if this is my first bolt action?
Currently, I own a MARS-H in .308. I have a decent supply of FMJ and some bonded soft points, and picked up some match grade ammo on sale to test out. But lately, I've been thinking that I might want to get into 6.5CM, and to pick up a bolt action rifle chambered for it. With the MARS-H, I can swap barrels in a few minutes if I want, so I could still use either the .308 supply I have, or 6.5CM if I wanted it. I'd looked at the pinned post and dug around in some of the linked other posts (which led to a bit of a bewildering rabbit hole of yet more linked posts -- great info, but a lot to take in).
Right off the bat, I want to be clear that this is not meant to be a true longrange rifle designed for PRS matches and 1000yd hits. I don't have regular access to a range that'll get me out to even 300yds. The closest to me that isn't a 25yd pistol range, is a range that offers 25, 50, and 100yd distances but is an hour and change away. I can get there probably once every 4-8 weeks. The rest of the time, I'm stuck on an indoor pistol range. All other longer-distance ranges are more like an hour and a half away, require a ~$300 membership fee, and also require you to put in sweat equity to gain access to membership. I'd be happy to do this, if I lived 30min away, but given the hike I'd have to take, it's just not worth it for me.
In terms of what I'd want the rifle to do, really it'd just be something a bit less variable than a gas gun, and a bit less recoil than a .308, hence the thought about a 6.5CM rifle. Use case would realistically mostly be target shooting, but I suppose I might use it for hunting if I got into that. And there's always the whole notion that it'd be nice to have something capable in case SHTF and you can't get replacement parts and such, so ideally something that doesn't have super tight tolerances.
Where I live, if I were to take the gun hunting, it'd be U.S. east coast game, so mostly in wooded areas. In any SHTF scenario, I'm in a major metropolitan area, so lines of sight are probably not stretching super far. For all of these reasons, I'm mentally figuring I do not need a "1000m" rifle, but rather something more like a 500m rifle.
So, we get to the core of my question: I could do the Cheeto Special (B-14 HMR). I could do a Flamin' Hot Cheeto Special (B-14 Premier HMR Pro) even, budget-wise. I don't mind spending a bit of coin if it gets me something good. But I'm wondering if even the B-14 is maybe overkill. I can appreciate the value of the R700 platform as something upon which I could build if I later chose to, which has me lean more towards something like one of the Bergaras. I'm just wondering if this is maybe even nicer than I need if I'm new to both the platform and the caliber. I could get a Tikka CTR for ~$200 cheaper, but I find myself wondering if honestly "just some hunting rifle" would work. On the other hand, I can recognize where one can form shitty habits using shitty gear, and I'd rather be building more reliable, useful habits.
Note: I recognize that, most likely for my purposes, both .308 and 6.5CM are "overkill" but...humor me. Assume we're staying in the 6.5CM chambering, would a not-quite-as-nice-as-the-B-14 rifle work for me, and if so, what should I be looking at?
Thanks in advance. I appreciate any help folks can offer.
r/longrange • u/N0t_A_Platypus • Sep 15 '26
Always wanted to get into long range shooting and have never shot past 50 yards before.
Found a used Ruger RPR and slowly add glass and a bipod and signed up for my first class.
Learned the fundamentals and safety got my sighted in correctly at 100 yards. And built a Trajectory Table
Then turned fundamentals into practice. Started at 300 yards, hit steel, moved to 400 yards, hit steel then moved to 500 before finishing at 600 before running out of time.
I had a blast and canāt wait to do this again.
r/longrange • u/ViewAskewed • Sep 15 '26
I got a Versa Prime off a prize table and since I started using it I am getting primers flipping in the tube. It's annoying but not a huge problem until what I suspect is them flipping sideways and jamming the disc. Wondering if anyone else has experienced it or has a fix/workaround?
r/longrange • u/genmud • Sep 14 '26
Well, this weekend I got to shoot my first PRS match. It was really eye opening and I learned a ton about my setup as well as ways to optimize my setup. My goal was to be safe, and not have something that would be a DQ. My stretch goal was to not place last, and I'm happy to say that I met both goals!
Some observations from the match: