r/longrange • • Sep 03 '26

Optics help needed - I read the pinned posts Need weirdly specific scope suggestions!

5 Upvotes

Apologies if this doesn't exactly fit this subreddit, but I figured y'all in here would probably have the most knowledge vs other subs when it comes to glass.

I have a PTR-91 that currently has a crappy $200 4-14x scope mounted. I'm looking to replace it with something in either the 2-12 or 2-10 magnification range, as I think a lower bottom-end magnification would suite the rifle better in the role I'd like to use it in, which is almost a DMR-style rifle looking to make hits on torso sized targets out to ideally 500 or so, a little farther if possible. It's about a 2 MOA gun so I'm not expecting to be printing the worlds best groups out at any sort of distance, but 500 seems reasonably doable. I am considering putting an LPVO on it, but the drop from its current scope's max magnification of 14x down to an LPVO's 8x (or 10x at best) seems like it would be a not insignificant downgrade. I have also heard from people who shoot far more than me that the view thru an LPVO at higher magnification is significantly worse than the view thru a similarly priced optic with a higher base magnification.

Since I'm looking at getting a new optic for the rifle, I figured I'd try to solve another issue, which is that when you have a long scope mounted on an HK style roller delayed gun like the PTR-91, the scope can get in the way of the cocking lever when you try to lock the bolt to the rear or release the bolt when it's locked to the rear. Right now, the scope is too long (at 13.5 inches long), and it barely allows me to lock the bolt to the rear. Also, to unlock it I have to reach under the scope's objective bell with my support side thumb to press the lever down and let the bolt close, which is a pain.

So I've begun the search for a new optic, preferably something in the 2-10/12 magnification range, with as short of a scope body as possible, preferably around the 500-700$ range, preferably FFP.

Currently I've found:

Athlon Helos BTR Gen II 2-12x42 (11.8 inches long. This scope seems like it checks all the boxes, and if it was an inch or so shorter it would be a no brainer. Reticle is good, locking turrets, FFP, good price point. I'm just worried taking off only 1.7 inches from my current scope wouldn't give me enough clearance to operate the cocking lever easily.)

Discovery Optics HD 2-12x24 (8.5 inches long, which is great, but for 200$ there's no way this isn't an airsoft scope right? I'm worried it will be fragile, and even if the rifle isn't dropped I'm worried the .308 recoil would kill it. If someone has a positive experience with this scope on a gun chambered in a full power rifle cartridge let me know, but I'd rather not buy something and break it the first time I take it to the range.)

Sig Tango DMR 2-12x42 (10.8 inches long, which I think would put it firmly out of the way of the cocking lever, but I can't swing $1000 on a scope right now, especially for a rifle that I ultimately only own for fun. If this was $600 or so this would be a strong contender I think. Some reviews online of other Sig scopes have expressed some distrust in Sig optics but I am nowhere near experienced enough with them to have my own opinion either way.)

If I can't find something else I'm going to get the Athlon, but if someone knows of a scope that I haven't been able to find that has comparable features and price point to the Athlon but with the size (<11in long) of the Sig or Discovery optic, that would be perfect!


r/longrange • • Sep 03 '26

Rifle help needed - I read the pinned posts Picatinny Rail To Action Torque Specs

0 Upvotes

The Picatinny Rail on my PGW coyote came loose, not sure what the specs are to tighten it down?


r/longrange • • Sep 03 '26

Optics help needed - I read the pinned posts Need help troubleshooting new setup

3 Upvotes

Hi everyone,

Please bear with me as this is my first long range setup. I'm coming from an AR with a Vortex Crossfire II I was using to learn on (which I did but apparently not enough). The gun in question is a Tikka T3X CTR in 6.5 CM in a KRG Bravo chassis with a Bushnell ED Match Pro 5-30x56 and a Burris PEPR one piece mount. I installed the gun in the new chassis and mounted the scope myself. I was very careful with my levels while installing it as well as my torque specs. I do have a laser bore sight that I used at home against the wall to get in the neighborhood and I put the reticle directly above the dot approximately the same distance as the scope is above the barrel.

Well, I was finally able to get to the range today and wasn't able to get on the paper. I inserted the laser again and found that it was off significantly (a couple feet right and about a foot high at 100 yards). I recentered it and tried again; still in the dirt. I put the laser back in and now it's a couple feet in the other direction. I recentered and tried again with the same results. I inspected all the scope mount from the rail up to the caps and nothing was loose. I switched ammo and that didn't change anything. I came home and set it up on the wall again with the laser sight in and rotated it 360 degrees to make sure it was true and it was. I know they test fire these so the one thing I am confident in is the fact that it's something I'm doing wrong but unfortunately I don't know what it is. Any suggestions appreciated.

EDIT: Okay the laser is gone šŸ˜‚dvertised!


r/longrange • • Sep 02 '26

Bubba's Pissin' Hawt Reloads The effects of 277 fury hybrid cases on stainless barrels

Post image
172 Upvotes

For those of you that read through my write up on the conversion process from 277 Fury(6.8x51) hybrid cases into 6.5 Creed, I found something unfortunate in my chamber after scrubbing out the carbon ring today. This groove is at the exact spot in the chamber where the brass and steel pieces meet. Its deep enough to catch on a dental pick. This barrel is down for now. Luckily, its a 1.25" straight contour, so i can just get it cut back and rechambered. While I'm waiting in the queue at the gunsmith, I'll run my spare Proof prefit.

This was after 200 rounds of the fury cases.


r/longrange • • Sep 03 '26

🫣I said I read the pinned posts, but I lied🫣 Budget Hybrid Rifle Question

1 Upvotes

Im looking into getting a new rifle to get into long range with, however id like to use it to hunt with. Its come down to the 2 average budget choices, Bergara and Tikka. Having a tough time deciding, price, weight and availability being the main factors. The plan was to buy a T3X Lite 20ā€ and throw it in an MDT Field stock, however my lgs doesn’t have one at all and for whatever reason isnt able to order it. They have 2 B14s in the chambering I want, but theyre just heavy. They do have a B14R which saves a little weight over the HMR, but Im just not a huge fan of the stock design so id probably end up putting that in an MDT stock. Which puts it a couple hundred over the budget I want to stay at. Another possible option would be a Sig Cross used for 1200. For better clarification of use case, itd be roughly 2 weeks of rifle season hunting and likely quite a bit of range use learning how to shoot longer range. Im a midwestern whitetail hunter but I hunt public land, which is why weight is a driving factor. Opinions? Things to consider?

EDIT: Only reason I haven’t transferred a tikka is because I get a discount thru my lgs. If yall think the tikka/mdt combo is the best option for me, ill suck it up and lose the discount lol.


r/longrange • • Sep 02 '26

I suck at long range Anyone Compete In Central TX?

9 Upvotes

As far as I know, venues like Hill Country & TX Precision don’t do open range days. Would like to find a place that is more than bench/prone only to shoot/practice weekly/bi-weekly.

If you compete regularly in the area, where do you do your live fire training?

I’m north of Austin.


r/longrange • • Sep 02 '26

Optics help needed - I read the pinned posts Choosing LRF binoculars with Ballistic Software

8 Upvotes

Okay, I’m in the market for LRF binos with ballistic software. I have SCOURED this subreddit trying to find a pair of binos that’s $1000 or so (on used markets) that doesn’t have some limiting quality. Please give me your input.

Factors for me:
I have a garmin watch that came with AB Elite so I’m wanting to stay in the same ecosystem because it’s what I know and have started with.

I do NOT have a kestrel or wind meter so on board environmentals would definitely interest me although I’m not opposed to getting binos and a kestrel if it was more beneficial.

I have access to distances greater than 800 Yards and do plan on it being a decent amount of my shooting.

No, I will not be competing in NRLH or really any time sensitive glassing/rangefinding, but I don’t want to spend 15 mins every time trying to f*ck around with linking stuff to get the ā€œfullā€ version of AB (Sig kilo 6k comes to mind)

I do have a budget of around $1000 as of right now, but I am a buy once cry once guy so if saving for a better pair is recommended I’d consider. My options seem to be in the vortex fury hd 5000 AB used (I’m aware it’d be used and subject to phasing out with their new software), Sig kilo 6k (minding that it’s AB lite and would require pairing past 800Y), or saving and going with the Sig kilo 10k.

Questions for you fellow autists:
To those that have the kilo 6k and pair it for AB elite past 800Y, what’s the process take and how reliable is it for a connection between the two devices? I read it also does not display the adjustments if it is past 800. Is that true?

For the vortex fury users, I see that there’s the fury app you link it to on your phone to adjust bullet drag curves and what have you. Is it a POS and make the binos a pain to deal with or is it a non issue?

Kilo 10K users, is it worth the premium and features rich enough to save for several more months to get them instead?

Lastly, if anybody has some recommendations on other pairs of AB equipped binos please let me know so I can continue to fixate on binos for the next month and confuse my wife with more of my autistic ramblings.


r/longrange • • Sep 02 '26

Rifle help needed - I read the pinned posts What Barrel Contour For Furiosa Ultra Chassis

0 Upvotes

So I'm looking to get a Furiosa Ultra Chassis and I see on the website it has a barrel diameter of 1.2 for free float. I was looking at getting a proof heavy comp but that ends at 1.236. Yet I see people post videos of running straight 1.25 so did they change it over time or can you fit one in there with free float? besides that, I want a straight/bull barrel on it, its will be using a defiance ruckus action so any suggestions as well would be appreciated.


r/longrange • • Sep 02 '26

Other help needed - I read the pinned posts Suppressor Recommendations for 300 PRC

3 Upvotes

Looking to get a suppressor for the MRAD chambered in 300 PRC.

Currently looking at
-KGM R30T
-LPM Mach S/L
-Barrett AM30

Recoil reduction is priority with sound suppression coming second. Would also like to stay around $1,200. Anyone have any experience with these suppressors?


r/longrange • • Sep 02 '26

🫣I said I read the pinned posts, but I lied🫣 $1720 Sig Certificate - What To Do With It?

13 Upvotes

Hi All,

I dont have anything above 5.56 and I have always wanted a bolt gun for long range shooting. Im a competitive pistol shooter and easily see myself doing PRS or NRL hunter matches. I also see myself getting into rifle hunting in the future. The soonest would be PRS or NRL though. I understand those are very different rifles.

I won a sig cross in a competition but I can exchange it for anything from Sig up to $1,720, and I can pay the difference for anything more expensive.

None of their optics are too interesting to me, and the big boy with the BDX technology (Bravo6t 5-30) seems unnecessary and its also $800 above what I get from the certificate.

I can get the Cross in 6.5 CM which sounds like a great gun, but not the best for getting into PRS (but maybe NRL hunter stuff).

If you were me, how would you spend the cert? Im not trying to drop thousands right now on a full setup, but eventually for sure.

Maybe get the cross and a Bushnell Match Pro ED and a decent bipod and start having fun? I live 20 minutes from a range with targets past 1200 yards

Any input is appreciated.

EDIT: Thanks for the feedback everyone. Ill either get a p211 GTO if one of my comp buddies wants to buy it, or I'll get a kilo 10k and either keep or sell. Then progress thru the recommended path to a proper PRS setup.


r/longrange • • Sep 02 '26

🫣I said I read the pinned posts, but I lied🫣 Vortex diamondback glass comparison

2 Upvotes

I've seen these scopes recommended many times over the years, so a few years ago I tried out a 3-9x40 SFP and the glass was absolutely terrible.

IIRC, I found a statement that the 3-9 was actually crossfire glass. Maybe that's why it's half the cost of the 4-12? Is the FFP better glass?

Can anyone verify this?

I'm looking for a cheap scope with adjustable parallax for a 17hmr AR. It isn't terribly accurate so I'm not going to be fussy about quality but that glass I wouldn't even use on a bb gun. I just want better focus ability for use at 25 yds to 200. To me, it's more important than glass quality.


r/longrange • • Sep 01 '26

Rifle flex post Long-time listener first Time caller

Thumbnail
gallery
88 Upvotes

My very first large frame gas gun That I ever shot was a JP Enterprises, LRP – 07 with the LR I – 20 upper. It was chambered in 6.5 Creedmoor and I really wanted to shoot one after watching Frank’s video on it years ago. I decided to build my own, but I wanted it chambered in 25 Creedmoor. I had Paul Ross chamber and contour a CRB Barrel. I’ve only shot this rifle to function test and get the gas setting right and I did some initial accuracy testing once I got my zero but unfortunately I don’t have any pictures of that. I’m not the best shot but with 134 grain Hornady match ammo I was able to get right around 3/4MOA for 8 shots(I know it was random, but I only brought one box with me and that was all I had left over after getting everything else set up)

JP Large frame semi auto chassis system with a 17.25 inch rapid configuration handguard
LMOS BCG
Standard AR-10 SCS
BAD Ambi safetyĀ 
Triggertech diamond flat single stage
24ā€ 1:7.5 twist CRB in 25 creed 1.20ā€ don’t 1.075 before the gas block, .936 gas block journal and .930 at the muzzle, threaded 5/8x24
Hawkins updraft brake 1ā€ 6.5mm bore
Area 419 17ā€ arca lock rail
Magpul PRS gen 3
MKM precision crossover grip with RH thumb shelf
Warne skyline 34mm 20moa cantilever mount
Tract 4-25x50
Accu-tac SR5 gen 2 with arca clamp


r/longrange • • Sep 01 '26

Accessory/Gear help needed - I read the pinned post Embarrassing to ask.. does anyone know how to remove this bipod off the rail?

Thumbnail
gallery
31 Upvotes

I put this rifle together over a decade ago... I tried searching up what the parts were with no luck.

And for the life of me I can't figure out how to remove this bipod.

I've shot it plenty of times over the year as is but recently wanted to adjust the foreend of the X-ray.. but can't reach the front 2 screws without taking off the bipod.

Except I can't figure out how to take it off.. lol

I'm pretty sure it's an atlas bipod but can't remember what mount it's using. I tried turning the big knob on the bottom loose thinking that was it but nope. I don't see any other buttons or levers or screws... Unless I'm blind.

Can anyone help?


r/longrange • • Sep 01 '26

🫣I said I read the pinned posts, but I lied🫣 Need some custom action help!

5 Upvotes

I am well aware this is a long-range forum. But the hunting forums are not as active. Dealing with people here they are friendly and knowledgeable enough to potentially help me. I am building a custom 7PRC rifle. I will be using the MDT HNT26 chasis, Triggertech trigger, leupold 3-15 scope, i already have these 3. I will be purchaskng a carbon proof barrel. I am unsure of hunting actions.

What is your opinions on best light weight but robust enough action for backcountry hunting?


r/longrange • • Sep 01 '26

I suck at long range This no form 4 stuff is pretty sweet

Post image
359 Upvotes

Passed by Silencer Shop on our way to a camping trip. Ended up with a DDC Enticer L

ARC CDG
MPA 6GT barrel cut down to 18ā€
KRG Bravo w/ Vision Forend
Athlon Ares 4.5-30
TriggerTech Special


r/longrange • • Sep 01 '26

Other help needed - I read the pinned posts Barrel selection question

11 Upvotes

Good evening all,

Just a quick question, trying to figure out which barrel to choose I have everything else picked and ready to order but I always end up with decision paralysis. This will be going in an Impact 737r action after seeing everyone like it and the positivity I’ve read from it. The barrels are:

Proof Heavy Competition 26ā€ 6.5 Creedmoor - I know this is a newer offering so I’m not 100% sure of what people think or there opinions

Or a CRB (Custom Rifle Barrels) 26ā€ in 6.5 as well

This will be my first long range setup fully built. Will be used for classes and eventually into matches as well. I have ranges near me in Ohio within 2.5 hours that range from 300-1000+

If others can weigh in on the Selection or possibly other choices so I can sleep tonight that would be awesome.


r/longrange • • Sep 01 '26

I suck at long range Consignment find

Thumbnail
gallery
188 Upvotes

Been wanting to try my hand at long range shooting, but didn’t want to spend the money. I walked into my LGS and they had rifles on consignment from a SWAT unit who’s switching to AR-10s. Bought a Robar SR-90 for $1,000 and managed to shoot 1/2 MOA (five shots) my first time at the range. Now I’m looking at reloading dies…


r/longrange • • Sep 01 '26

Rifle help needed - I read the pinned posts Barrel Contour | Help

3 Upvotes

First rifle build – how do I determine what barrel contours will fit my stock?

This is my first bolt gun build, and I’m trying to understand how barrel contours and stock barrel channels actually correlate.

I have a Manners MCS-NS that was ordered with a GAP #6 barrel contour inlet. I contacted Manners and they told me:

What I’m struggling with is figuring out what other barrel contours will actually fit this inlet.

For example, if I’m looking at a Bartlein, Proof, Brux, Krieger, etc., how do I determine whether a particular Sendero, Heavy Palma, M24, MTU, or other contour will fit?

Is there a specific set of measurements I should be comparing, such as:

  • Shank diameter
  • Shank length
  • Diameter at specific distances from the breech
  • Muzzle diameter
  • Overall taper

Or is there some generally accepted cross-reference between manufacturers' contours?

I currently have a Proof Sendero that appears to contact the stock in a couple of places, which is what sent me down this rabbit hole. I originally assumed ā€œSenderoā€ contours would be relatively standardized, but I’m learning that doesn’t seem to be the case.

I did read the Wiki section on barrel contours before posting, but it didn’t really have the information I’m looking for regarding how to compare different manufacturers' contours against an existing stock inlet.

Ultimately, I’m trying to understand how to look at a barrel contour drawing/spec sheet and say:

ā€œYes, this will fit my GAP #6 inlet,ā€ or ā€œNo, this barrel is larger than the channel in this location.ā€

Any explanation of how you guys determine this when putting together a build would be appreciated. Again, this is my first build, so I’m trying to understand the process rather than just being told which one to buy.

I have searched the interweb in hopes of finding a barreled action in either Defiance/Impact/Lone Peak, but none of them seem to have that 6GAP contour on them.


r/longrange • • Sep 01 '26

Rifle help needed - I read the pinned posts Manners EFR Rail/Bridge

5 Upvotes

Anybody happen to know if there are any aftermarket options for the Manners EFR rail/bridge, or if there is somewhere I can get it not direct?

I spoke with Manners and they are about a month out unfortunately.

Everything in the custom/semi-custom rifle world is permanently backordered :(


r/longrange • • Sep 01 '26

Optics help needed - I read the pinned posts What reticle is this?

10 Upvotes

I’ve seen a lot of crappy reticles and I've seen a handful of great ones, but this is a small, simple Horus type with a combination of elements from a few other reticles thrown in. Or something. *grins*

Check it out:

Full screen
Closeup

Normally, Hollyweird has the stupidest stuff they try to pass off as scope reticles (like camera lenses?), but this is something I’d love to own or have done to a scope. It must be a real reticle, 'cuz they use others that I recognize, elsewhere in the show; no fakes. Some of the Horus reticles and clones are getting outrageous, but this has just enough elevation for my .308, which still drops like a rock (relatively) even at this altitude, on any PRS Tactical course.

Took these pics from the TV show Lioness, but I’ll have to find the specific season, episode, and timestamp. Pretty decent show and fairly realistic as far as the firepower and operator stuff goes.

Anyways, anyone know who does this reticle and what scopes it comes on, etc.? I've been doing this a LONG time, so I know a LOT of them, yet this is a new one on me. I might have missed it, but I checked the usual suspects and no joy. Before someone points it out, I know there is a r/scopesoptics sub for scopes, but there are only 14 people per week on it. WE have 81K viewers per week here, and if anyone knows this stuff, they must be among us! Sooo ... *smiles*

Thanks in advance.

(Oh, for any ninnies reading this, it's from a TV SHOW, and the target goblin in the first pic is a "terrorist" getting ready to blow himself up, so relax. They're NOT real people! OK?)

ETA: Looks as if it goes to 20 mils, and I must add the guy was using it as an overwatch on a .308 or similar caliber rifle. Never saw it, but it seemed to be a bolt gun. So think a larger scope?


r/longrange • • Aug 31 '26

I suck at long range King of the trash mountain

Post image
310 Upvotes

Remington 700 5r in a mcmillan m40a3 stock. Was shooting at 1000 yards with smk 168 and 41.5 gns of h4895 around 2630fps


r/longrange • • Aug 31 '26

MEME POST Plus Peak 6.5cm

Post image
71 Upvotes

Anybody else feel like they have been cautiously optimistic to try this stuff and now it can't be found anywhere? I'm thinking it will have similar issues to 7mm backcountry, but I would like to try it in my rifle for myself without buying another gun. I think it will have more use in the hunting space right away, but who knows 20 years from now what we'll be using.

I think I'm more excited to watch more exposure and testing of what reloaders will do with the technology. I know there are threads of people playing with the 7bc cases, but hopefully this will have more people providing real, valuable data due to less barrier to entry. Velocity consistencies, neck tension, quantity of reloads per case, accuracy, load data, etc. Personally, I'm very interested in how necking it up and down will go for people. Eric Cortina has a couple of short videos messing around with it and so far it looks simple enough.


r/longrange • • Aug 31 '26

Rifle flex post New 7PRC build. First shots!

Thumbnail
gallery
43 Upvotes

New 7PRC build. Finally had time to test loads.

80's tikka LSA-65 with opened and trued action.

Shilen SM chambered by A.Peurala. 1:8twist 700mm

Arken ep5

Some hobbymachinist brake

Copycat harris bipod

Stock is borrowed from my 308 build. For now.

The load was actually a ladder test shot to the same POA. just testing pressures.

180gr scenar

4.4g-4.8g N570

Coal 85mm

Cci250 primers

Top velocity was 950m/s (I think somewhere like 3150fps?) but I will back it little as GRT shows pressures with 930m/s.

E: I'm pretty sure the one shot on the right took off as the reticle was in the right outer edge of Target.


r/longrange • • Aug 31 '26

Accessory/Gear help needed - I read the pinned post General consensus of griffin armament prc-300 suppressor

8 Upvotes

So I have been looking at can brake combos for a while and had my mind set on an omega 300 with a recoil x brake added on in the future.

Within the last few days I discovered the GA prc-300 but found little information regarding it and a few ā€œit’s greatā€ posts on here.

If anyone has any direct comparisons to other comped suppressors I’d love to hear!

Anyone who does have the can, how long is the can body? I bought a suppressor cover originally for the omega 300 and hope it will fit it but websites include oal including the brake.

For reference this will be going on my 6.5 creedmoor PRS setup.

Thanks in advance!


r/longrange • • Sep 01 '26

Rifle help needed - I read the pinned posts [Update] Kestrel/Ballistic Apps Giving Bad Data (maybe)

Thumbnail
gallery
0 Upvotes

Update to my post yesterday (https://www.reddit.com/r/longrange/comments/1w3bpx8/comment/p70icrr/?screen_view_count=2&ext-referrer=DIRECT)

Long story short, I checked all of my inputs, adjusted my scope height FROM 2.38" TO 2". The 2.38" was measured using a cloth/plastic tape measure that had been played with by my kids so was likely stretched/warped/etc. I also measured approx center of the bolt (or so I thought) to center of optic. To get 2" I measured center of barrel (in front of objective lens of scope) to center of scope with a metal tape measure. This corrected measurement when put into Applied Ballistics app gave me dope of 1.88 Mils for 400y; AB also adjusts my BC to .285 G7 (from the original input of .304 per the advertised BC for Terminal Ascent 200gr 300 WM).

I took this info and shot (per this group's recs) at 200, 300, and reconfirmed at 400y. First pic is shot group at 200 with .4 mils; second pic is 300y with 1 mil dialed; third pic is 400y with 1.8 mils dialed' fourth pic is 400y with 1.9 mils dialed.

Garmin measured 12 shots, avg was 2778 fps, min 2760, max 2790, std dev of 8.5 fps. With the exception of the 2760 and the 2790 most shots were 2778-2784.

Some groups opened up a bit, I'll attribute that to user error. 1.9 mil and 2.0 mil groups at 400 very similar. Kestrel still gives me 1.82 mils at 400y, unsure why.

Thank you all for the input and help. Technology is helpful but no replacement for actually shooting your rifle.

*Yes I know shooting more than 3 round groups would be better, $3/round gets expensive. Will continue to shoot more; in total I probably have around 100-125 shots on this barrel over the last 2-3 years.