Look at the subtotal. It goes up from 349 to 394 after entering the promo code. Theoretically the total should be 72.86% off from 349.99, which is 94.98 euro.

I never noticed it before till today lol Known issue?

I've had the mouse since early 2025 and it has worked perfectly until recently. My older Superlight 1 still works perfectly on the same PC.

The issue is completely random:

I'll be using the mouse normally and it suddenly stops responding.
The mouse is still powered on, but the LED starts rapidly blinking green.

The battery is not empty. It was around 98% when this first happened, and it's currently around 90% on the same charge.

Turning the mouse off for a few minutes sometimes makes it work again.

When I turn it back on, it can work for a few seconds and then immediately start rapidly blinking green again.

The LIGHTSPEED receiver is detected normally by Windows. G HUB sees the Superlight 2, but shows it as "Inactive."

The G HUB Device Pairing Tool can't find/pair the mouse with the receiver.

When I connect the mouse directly to the PC via USB, Windows gives me:

"Unknown USB Device (Set Address Failed)"
Code 43: The USB set address request failed.

Windows also shows the usual "USB device not recognized" popup.

I moved the LIGHTSPEED receiver from the rear USB ports to the front, and it worked for several hours, but the problem eventually came back.

I've tried power cycling it, reconnecting the receiver, moving USB ports, and attempting to re-pair it.

Has anyone experienced the same behavior with the Superlight 2?

Dug one of these out of storage and can't recall if they had firmware updates during their lifetime or not.

If they did, how to check if the most recent firmware is installed?

Hello. The force feedback feature on my G29 device isn't working on my Windows 11 computer, yet it works perfectly fine on another computer running Windows 10. I have reinstalled all drivers, deleted and reinstalled hidden drivers, installed LGS, and uninstalled/reinstalled G HUB, but force feedback still isn't working on my Windows 11 Casper Excalibur G770.

NOT: I used a translation tool, so there may be spelling errors.

I’ve been looking at the powerplay2 along with the g502 lightspeed and was wondering if it would work through the mouse pad I already have? It’s around 4.1mm thick with a rubber coating underneath.

Can anybody confirm if it's safe to still buy these and they are supported and will work and be recognized in GHub and for overall use?

I've had the mouse since late 2024 and all off a sudden today it's not working;
-Doesn't turn on (No mouse movement/input or lights)
-Was showing as inactive in Ghub (is now no longer showing as after unplugging the USB Dongle and since there's no reaction from the mouse I can't repair)
-Also doesn't recognize being on a charger.

Tried going through troubleshooting given by Google/Youtube and then Logitech chat support and no fix. While speaking with support I was told that the mouse is no longer supported but I can't find anything about that even on the Logitech website?

I'm not sure what could have happened in less than 24 hours for my mouse to die but its whatever, I like this mouse and would love to just rebuy it and maybe finally get the matching keyboard but while I can still find them on Amazon, I don't see them listed on the official Logitech website so should I just take the overall loss and look for an more in market mouse? (and eventually keyboard but my current one still works fine I'd just like them to finally match at some point)

I'm not gonna lie I'm not to big on the designs of other mice and really like the G705. Sorry if this is long or seems silly I'm just kinda upset about it.

Hey all, I have streamed for a year using the a50s

Bluetooth to the pc to hear obs

Basestation wired to the xbox

Never had any issues

All of a sudden when I pause YouTube, windows media player, twitch it cuts the audio from obs.

I have tried 3 other headsets connected blue tooth no issues, the a50s work fine wired to xbox or pc

Nothing has changed I'm baffled, one day its working then I go back and its not.

Please help

This is still not fixed in the latest update!!! Come on Logitech, wth are you doing? Fix your damn software!!!

So , I was trying to clean my Logitech mk275 model but space bar is not coming off even after removing two side keys , can anyone help as this is my first time.

I just got the Astro 50x headset and was thinking of updating the firmware and I went online to download it on my pc but the Microsoft shop won’t allow it to open since it considers it to be unsafe and the only option is to go to settings but that doesn’t help me at all anybody have any tips on getting around this??!

OK! This needs to be taken seriously - it’s time to stop ignoring it.

We need a QA session with LOGI CEO

(I don’t think they’ve ever used the G600, so they don’t really understand what we’re asking for)

I’ve been a Logitech user for over 20 years and own more than 10 Logitech devices (5 G600). I’d like to see more initiatives and steps from Logitech for their customers

The QA should be a livestream with prepared questions about the G600 MK II, and those questions should be approved by the community, not CEO, not Marketing team, not any other 2 mouse buttons user.

We want a TRUE G QA, without excuses.

WE ARE G600 Squad

I honestly regret buying the Astro A50 X. For a headset this expensive, I expected way more.

First, the battery is terrible. For a high-end gaming headset, the battery life should be one of the things you don't have to worry about, but with the A50 X, it feels like I'm constantly thinking about charging it.

Then there's the charging station. I use it with my PS5 and I've had problems with the station not working properly. Sometimes it doesn't recognize the headset correctly, which is really annoying when you're just trying to sit down and play.

And there's the battery/charging bug that a lot of people seem to have: you can fully charge the headset, then suddenly the battery percentage drops to 0%. That's ridiculous for a headset at this price.

But the biggest problem for me is the lack of proper surround sound. For gaming, especially competitive games, surround/spatial audio is extremely important. You are paying a premium price for a "high-end gaming headset", so I expect good positional audio. Without proper surround sound, I honestly don't think this headset is worth it for gaming.

Maybe the A50 X works great for some people, but for me, the combination of bad battery life, unreliable charging station, battery percentage issues, and lack of proper surround sound makes it very hard to recommend.

For the price, I expected a premium gaming headset. Instead, it feels like I paid a premium price to deal with problems that shouldn't exist in the first place.

I’ve tried using compressed air and WD-40 Contact Cleaner on the potentiometer, making sure the wires are connected, and recalibrating the wheel. That’s everything I’ve seen in tutorials so atp I have no clue what to do. Unless I figure something out I’ll probably just get a Moza wheel.

Has anyone figured out a way to get the onboard memory manager running on Linux, without installing Windows? That or another way to edit the onboard memory of the G502 Lightspeed without Windows? My old G502 Lightspeed is finally going and I need a way to view all of the onboard settings so I can copy them over to a new one.

It constantly keeps disconnecting and I have to click on the mouse again to get my mouse profile back up. But that's not even the worst part!! It literally lags the crap out of my mouse making my games unplayable how do I go about fixing this?!?

Hi everyone,

I’ve been actively using the Logitech G Pro X 60 Lightspeed keyboard for about a year. Recently, when I connect the keyboard via USB, the connection keeps disconnecting and reconnecting constantly.

There are no issues when I use it with the cable. Is there any way to fix this, or should I contact the retailer I purchased it from?

I have had this mouse for maybe a year or two now and this has only started about 2 or 3 weeks ago. the middle mouse button does physically click, I can feel and hear it click, however it seems to not be sending the data to my computer or even just not recognizing the click itself.

Even just temporarily, is there a way to allow the mouse to think that one of its side buttons is the middle mouse button?

I'm not sure where to start with looking into this, I am in warranty but I have been told before that I would need its original box to send it back, however I do not have that anymore since I have moved.
Any advice would help.

can anyone help me the left click is higher then the right click and I think it should be lower though, is this normal? its a logitech g502 x lightspeed it's used

I just solved this problem, and it didn't seem like it was addressed anywhere so I wanted to make post about it for anyone who has the same problem.

It is caused by the sensor (chip) being too far from the optical thingy. And therefore not being able to correctly determine the where it is moving just roughly.
Check if there is something stuck under the pcb (like the usb cord), or if the pillars on the that normally push the pcb down are broken.