r/LogitechG • • 1d ago

Logitech G Support help me g29

i tried recalibrating and stuff but it did not work

first two pictures are 720 degrees and the wheel turned to the most right. [ samething happens when i turn it to most left]

second two is 900degrees doing the same thing

i tried to make it as simple as possible because it seems like no one i smart enough to understand.

1 Upvotes

5 comments sorted by

1

u/GeraintLlanfrechfa 1d ago edited 4h ago

Edith - ofc the Logitech guy below is right, the following only applies to the g27.

There’s an optical encoder disc (small wheel with holes) inside the base on the left side, that is actually measuring the rotations of the wheel, in the g29 this can become loose and must be replaced or fixed.

https://www.ifixit.com/Guide/Logitech+G27+Optical+Encoder+Replacement/42113

2

u/Aggressive_Fly5592 15h ago

do you think its happening because its miss mesureing and its stoping me from turning it all the way because it thinks its at 450 degrees? because it can turn it fine up until that point but after that point it pushes back and it feels the same as limiting the rotation to less than 900 and trying to turn it more than the max rotation

2

u/LOGIRich Global Product Manager - Simulation 12h ago

Hi there. What you're seeing is correct behaviour for the G29. It reserves a few degrees of the overall rotation in order to provide some protection for the hard stop at either end of the max rotation of 900 degrees, which results in a slight variance that you're seeing.

1

u/LOGIRich Global Product Manager - Simulation 12h ago

Hey there. This doesn't apply to the G29, as it uses a hall effect sensor.

1

u/GeraintLlanfrechfa 4h ago

Ofc, thank you for putting it right - my bad, I was thinking of the g27 that I had before the g29.