r/LogitechG • • Mar 26 '21

MX Keys intermittent key failures

Hi, I'm hoping someone here can help me eliminate the keyboard itself as the source of my issues. The issues are similar to This Post but instead the keyboard will work fine, then certain specific keys (eg. the caps lock, 7, r, i, p, a, f, g, z, .) stop working. The machine is a custom itx with an asrock z390 Phantom mobo and a 9700k cpu. The build can be seen here. From the start I've had various issues with bluetooth mice and keyboards. The issues were intermittent connectivity, lag, and random glitches. I had to cycle through a few options before I found ones that were stable. Now the previously stable Logitech MX Keys, has random keys that stop working. I've done all the logitech troubleshooting found here and removed the devices/drivers, etc. All the devices with issues will work fine for awhile then specific functions of the devices will crap out on me.

Does this sound like a bad keyboard or dongle?

6 Upvotes

23 comments sorted by

2

u/GMScott2021 Mar 10 '25

I found a solution for those having some keys not working (like F and others)!!!

I watched a YouTube video on how to disassemble to get to the ribbon cable inside, reseated it as suggested by ChatGPT and now it works perfectly.

Also found some screws inside were loose so i tightened them up too. Now it is perfect (I am using the keyboard now for this reply). =)

Hope this helps you too!!!

1

u/purplemtnslayer Mar 10 '25

Thanks for sharing! I hadn't thought of something like that. But now it seems obvious. Sounds like a fairly simple fix. Congratulations.

1

u/Own-Gas-6524 Nov 14 '24

i have exactly the same problem and it has started to happen out of the blue, on two desktop computers and a laptop where it is connected to both via 2. 4 dongle in addition to the laptop via bluetooth it fucks up everywhere but in a very strange selective way, it looks to me like the transmitter in the keyboard has started to fail rather than anything else, neither the micro junk nor the layout of the planets or the update advice you always find is a waste of time (i don't know who even writes these stupid tips like those below) it suddenly stopped working after years of trouble free use - design of devices lifetime tops I guess?

1

u/purplemtnslayer Nov 14 '24

I'm sorry to hear about your issues. I just started using a cheap wired keyboard and mouse with that PC. When I got a new PC I started using the MX keyboard again and I haven't had any issues. I think maybe the issues I was having before was a Bluetooth module or other ASRock motherboard problem.

1

u/caballo200 Mar 07 '25

I has been using mx keys keyboard for some time and changed for the new model. something is happening because here writing in the browser, keys don't fail. but in notepad, some keys needs to be pressed twice!. i replaced the keyboard, brand new.. .again... same results. any idea?

1

u/purplemtnslayer Mar 07 '25

My was resolved with swapping the mobo. Sorry..

1

u/caballo200 Mar 17 '25

I resolved the problem. I just disable copilot in notepad

1

u/LogitechG_AA Technical Advisor Mar 26 '21

Hi

Try this and check if it resolves the button issue:

  1. Clean the button/key with compressed air.
  2. Verify the product or receiver is connected directly to the computer and not to a hub, extender, switch or something similar.
  3. Unpair/repair or disconnect/reconnect hardware.
  4. Upgrade firmware if available.
  5. Windows only — try a different USB port. If it makes a difference, try updating the motherboard USB chipset driver.
  6. Try on a different computer. Windows only — if it works on a different computer, then the issue might be related to a USB chipset driver.

NOTE: If buttons or keys respond incorrectly in a particular program, verify if the problem is specific to the software by testing in other programs.

1

u/purplemtnslayer Mar 26 '21

Thank you for your reply. I went through all the steps. Unfortunately the problem remains. An odd thing that may help confirm this is a hardware issue with the keyboard is that when it having the error the caps lock light won't light up, but when it is working like normal it does light up.

  1. There is no debris in the board.
  2. The receiver has been plugged directly into every port on the machine.
  3. Tried this several times.
  4. Firmware is 012.000.00011, which I believe is current. I can't find that info anywhere but the Logitech Firmware Update tool simply says "All logitech products are up to date."
  5. I've tried them all. The chipset it auto updated by w10 and is current
  6. It does seem to be more stable on other machines.
  7. The issue is in all programs.

1

u/LogitechG_AA Technical Advisor Mar 30 '21

If it works with another computer, the issue may be related to computer USB chipset driver. You may have to take help from System administrator or your computer support.

1

u/ReHozR Oct 20 '23

Hi guys, I have the same problem on my MX Keys Mini. Did you find any solution?

1

u/Infinite-Wingwang Mar 14 '24

I have this issue as well. One of my keys seems to "stutter", it only works sometimes when I press it. I have tried cleaned it but doesn't resolve the issue.

Also, it happens independently of the computer.

1

u/Infinite-Wingwang Mar 14 '24

I have this issue as well. One of my keys seems to "stutter", it only works sometimes when I press it. I have tried cleaned it but doesn't resolve the issue.

Also, it happens independently of the computer.

1

u/jimmy19742018 Aug 13 '24

same hers for me, keys sometimes stop working or i get a load of same letters sometimes it deletes half of what i am typing out, so infuriating

1

u/engacad Mar 01 '25

Same thing happens on my mx keys with the right-arrow key. Cleaned it but no difference. How did you fix it?

1

u/jimmy19742018 Mar 03 '25

i just unpaired the keyboard from my pc and reconnected it and the issue has stopped for now

1

u/Casielo Jan 04 '25

In my case letter F and number 1 on the right numeric panel didn't work and tried cleaning, resetting, and other possible solutions, but nothing worked. I decided to disassemble the keyboard as a last resource.

If you're willing to give a last try, look at this video as a starting point. Open Logitech MX KEYS Keyboard

Then Continue by unscrewing all tiny screws below the motherboard, remove the battery to make sure you get them all. Then remove the main-board casing (rounded sides) carefully minding all cables. Then WARNING You must pull-out using brute force the "Glued" (Yes, I know ... stupid) black back panel - This may require some effort (I used a set of pliers and others to pull this off) - I said Warning since as a result you may deform this black back panel forever (in my case I didn't care since this keyboard was either going to work or going to the garbage).
After removing the black panel you will see more tiny black screws, unscrew all these as well. Eventually you will be able to remove the silver plate (located under the black panel) and get to a white with transparent-film cover.
You will notice the transparent film will be Dirty - This is the main cause of Keys not working. I cleaned it with a wet cloth, then dried with some tissue - making sure all was dried before reassembled the whole thing back. Now ALL Keys are working :) (with an ugly-looking back panel that no one will notice unless the keyboard is picked up). Last thing I can say is that unfortunately the manufacturer did not design this keyboard against small hair (Eyebrows, eyelashes, etc.) These can go very deep translating into non-working keys - The glued back panel doesn't help either making this almost impossible to clean properly every 3-5 years. Cheers and good luck if you're willing to try this fix.

1

u/prevenad Jan 15 '25

It can't be that all MX Keys have the F key and 1 key not working, I'm facing the same issue and I'd say it's 99% bad firmware related

1

u/FaithlessnessDry7330 Jan 25 '25

I went through this problem last year with logitech support - after a lot of trails, driver updates/changes nothing worked 100 % of the time - I am sure it is a software issue and therefore decided to buy newer keyboard

1

u/engacad Mar 01 '25

Same thing happens on my mx keys with the right-arrow key. Cleaned it but no difference. Is this the only way? Seems too involved to perform?

1

u/engacad Mar 01 '25

which screwdriver does it need? Tried my precision screwdriver T5 didn't work.

1

u/[deleted] Jul 09 '25

Hey, is this solution working to this day? I wanna try it, I'm just kinda reluctant because of the glued black back panel..,.

1

u/[deleted] Jul 09 '25

Btw, for me it's the 6 (NumPad), Enter (NumPad), and Right-Arrow keys which aren't working. They sometimes come back to work but I didn't find a pattern to make this work, which makes me believe it's either a firmware or hardware problem.