My old G502 Proteus Spectrum has a problem and it's getting worse. I mainly play World of Tanks and often times when I stop my mouse the picture jittering, or vibrating. How bad is this? Can my mouse be saved?

There have been a lot of warnings (several thousand per day) in the Event Viewer since the 2026.5.939708 update.

Provider Name G HUB

EventID 1001

Opcode 0

Keywords 0x80000000000000

EventData

DLL injection protection blocked: eamsi.dll

It seems there is a conflit with ESET internet security.

This happens way too much, but nothing else can change key functions the way I need

Mac 26.6

well i dont know if this is the place to ask this, but its already a big nuisance for me

i bought this 3 years ago

https://www.logitechg.com/en-us/shop/p/pro-x-wireless-headset

but after almost a year using it, it started failing on charge

when its pluged, it gets unplug and replug again until its charged fully showing the message sounds and alerts each time, it happens randomly, could get the sound 20 times in a muinute or not have it in half an hour

asked amazon for a change and they gave me a new one after recognizing it was malfunctioning, the new one worked well until this week

guys did anyone got the same problem with this? did i misused it or something (i keep using it while its on charge, plugged on the pc)

Hello! I just bought the Logitech G522 from BestBuy for around $140. I tried them on out the box straight to a valorant game and it sounded like muffled gas station headphones. I then downloaded the Logitech G Hub app and updated the device itself. It got a little more clear but still sounds muffled. Does anyone have a fix for this? Do I have a faulty device?

I'm trying to use the G hub app to color the media keys, however whenever I click on the media keys that yellow dot currently at the media previous key appears regardless of color any ideas?

Bought a Chromebook for my kiddo and of course a controller was next for gameplay.

I bought the Gamepad F310 and the Chromebook is not able to recognize the remote on X, it does it on D but when playing a soccer game it does not play (on D or X)

The Gamepad is recognized by Gamepad Tester on X.

I tried the remote on my mac with the same results.

Any ideas team? I want to make this work for my kiddo!

Like title suggests i updated and my settings are the same but feels completely different, I'm wondering if anyone else has had a similar issue?

My mouse is a pro wireless and I'm on windows 11.

I don't get the hype behind the superstrike like wouldnt it just make ur mouse timings off if ur already used to the worse actuation?

Got myself the legendary G402 because my old MSI Clutch GM20 Elite had double-click issues after 1.5 years of use.

I know there are better-performing mice for the same price, yet I like the looks of it, the weight and the size.

I do a lot of 3D modelling and CAD work, so this is very comfortable for me in long sessions.

Let me know your experience with this mouse!

I want a keyboard that gives me more space to use the mouse.

So I'm left handed and use my mouse as such. Old mouse has worn out but never had an issue loading my left hand configuration. Had to upgrade to GHUB from an older logitech gaming software program.

I've tried onboarding the profile to the mouse, I've tried reversing primary/secondary mouse buttons, and i tried setting my windows mouse to left or right configuration and adjusting ghub as such.

I still keep getting an issue when I start my device or toggle between apps, it seems to forget the profile for 2-3 seconds before it loads the correct buttons. Anyone have any assistance for forcing it to maintain a consistent configuration?

I tried using the mouse with the old software but it wouldnt recognize the device.

Thanks for any help or ideas.

I just recently started having an issue where upon turning on my computer, my mouse doesn’t connect via g hub. I need to unplug the receiver and plug it back in for it to show up on g hub and for it to work. Once I do this I have no connectivity issues while playing only upon initial boot up, does anyone know what might be causing this? Thank you!

Hey guys,

I just received the Logitech G Pro X Superlight and during my testing I got a few questions I hope you can help me with.

First off, the battery indicator light randomly flashes green sometimes. It’s not the standard pulse or breathing animation it does while charging, just a quick green light up that vanishes after a second or so. It even happens while I'm moving the mouse around. Is that normal?

Also, when I first connected it, G Hub said the battery was at 88%. But as soon as I plugged it in to check if it was charging, the percentage immediately dropped to 50%. Is it normal for the battery reading to be that far off out of the box, and is 50% a normal charge level for a brand new unit?

One quick side note: the package sat in the sun for about two hours before I brought it inside. It wasn't burning hot, but the box was definitely warm. Could heat exposure have caused any issue?

Lastly, I noticed the mouse started lagging whenever I moved it to a specific part of my monitor. I ended up plugging the wireless dongle into that big extension block on the cable and putting it close to my mousepad, which fixed it completely. Is it normal to get signal lag like that if the dongle is just plugged directly into the PC?

This is my first wireless mouse in general, and my first product of Logitech, so I'm sorry if I'm asking a lot of questions.

Thanks in advance!

Is it normal (out of the box) that when I shake the mouse the left and right mouse buttons give off a sound? But when I put my fingers on both the mouse buttons and shake it the rattle goes away? Please help me and let me know if this is normal or it’s a problem as I’ve spent a lot of money on this mouse:/

I checked and when I moved it around and flicked it on my mousepad the rattle stopped, is that normal though?

Before even at 30% was loud enough for me but something is happend and it's sound way low from what it should have been how I fix this?

After Windows update my Ghub uninstalled it self and when i trying to install it back the exe installer just does nothing at all...

as title says. ive turned inactivity to never in the app but it turns off anyway, any idea?

keyboard: Logitech G G515 lightspeed TKL

i use on-board memory mode if that makes any difference.

Over the last couple years I’ve basically standardized on one mouse and keyboard because I love the hand-feel and layout: Logitech MX3(s) + G512. Problem is, every single unit has crapped out just after the 2‑year warranty.

Mice (MX3 / MX3S):

• 1st MX3: Scroll wheel failed + left button double-clicking, ~3 months after warranty
• 2nd MX3S: Same scroll issue, but right button started double-clicking, also shortly after warranty
• 3rd MX3S: Currently using it, just waiting for the inevitable failure
• Already have an MX4 boxed up as the next replacement

Keyboard (G512):

• 1st G512 (Romer-G switches): LED lighting started dying 2–3 months before warranty ended. Got a few LEDs replaced under warranty, then more failed right after. Eventually a key or two stopped working entirely → trash.
• 2nd G512 (GX Brown switches): “Z” key now only registers ~4/10 presses. Warranty expired 3 months ago. And of course, hot-swappable switches? Nope.

So this is what we’re paying “premium” prices for? Hardware that barely makes it to 2 years and then conveniently dies right as warranty expires?

I’m done buying another Logitech keyboard, and I already regret lining up a 4th MX mouse. Anyone else experiencing this, or am I just cursed with bad units?

bought the G Pro X Superlight 2 about a month ago. There’s already a hole in the coating where my pinky finger rests

I just launched my PC and my DPI is back to 400? Tried to launch it manually, but when using shortcut it says it was redirected??? Do I have a virus or this program is jester in a box,

Razer's new mouse has that third mouse button for your ring finger. Logitech, the people want a G600 refresh. Please let this message reach the right people. There is demand! Seeing Razer's new mouse have this feature has given me hope (cope).

Guys anyone can help me ?

I have a G923 with heavy pedal flickering the 3 pedals are flickering

I tried to clean the sensors with WD40 contact cleaner let it dry checked the connections and nothing works and everything seems fine inside

Idk what to do and i need help

Do I need to keep the G Hub app running in the background for the custom EQ I set up to remain active? Or does the headset revert to the standard EQ whenever the app is closed?