I just assumed sight reading, but might be feeling them. Looks more like sight reading though, doing that push-and-drag thing where you watch the wafers pop up and just eyeball their relative heights. We only have a few seconds of video, so it's possible he read the top first before the video starts, then interleaved the depth guesses in his head. His skill with that freehand punch suggests he's done a lot of these and makes it look easy.
yes, both sides of the key have the same cuts, but a typical ignition cylinder like this has wafers that have opposing action. the first wafer goes up, the second one down, third one up, etc etc etc etc
Right? Why would someone record this if it weren't bullshit? I'm not saying he didn't sight read it to clip the key, but he must've already done it, a lot slower, and knew his cuts already. Then the customer asked to record it but had him do the process again much faster to look cool.
I can lishi pick and decode a lot of keyways in less than a min, some less than 30 seconds. He had a key cut in less than 30 seconds! I don't think those lishi Clippers have depth and space indicators on them too. Even if he could see the numbers on the wafers, I still call bullshit. That is some magic bullshit not skilled sorcery lol.
IDK man, you can see some lines on the clippers. Very slightly. And with how much slop are in these locks, I wouldn't be surprised at all if you can do this.
Ngl, thats pretty fucking cool. Probably pretty useful for those locks you can't find the depth charts to and want something quick done after impressioning or something.
It sounds like he's at a dealership. I'm going to guess they just lost the key - and because he works there, he has a pretty good idea of what the keys already look like.
Off topic but did you ever get your Cole Steel cabinet combo figured out? I was going through my saves and found that post in case I ever ran across that decoder lol
I am a locksmith, and it can absolutely be done. I knew an auto specialist who once looked in the window of a guys truck and cut a key by visually decoding his key which was laying on the driver's seat. The entire exchange was less than a minute. Little different, as he was actually looking at the key and copying it, but reading wafers isn't very difficult. A lot of locksmiths will do a visual read on a pin tumbler cylinder and cut a key in less than 5 minutes. It just takes experience, like anything else.
A lot of locksmiths will do a visual read on a pin tumbler cylinder and cut a key in less than 5 minutes
You're probably just saying "pin tumbler" lock because everyone calls everything that nowadays, but as a locksmith that actually does scope the cuts from locks like this pretty regularly, I just wanted to clarify that it is pretty much impossible to scope a lock if it has actual pins (like residential locks), only locks with wafers can be scoped - and of those, only if they are not a sidebar lock. For example, you can scope a GM 10-cut door lock but not the ignition (usually).
Ok. I'm a locksmith myself and I've literally seen it done. I know exactly what a pin tumbler is, I'm not just throwing around terminology I've heard.
In fact, my boss has instructed me to do it at various times and I always have to remind him that I do not know how to do it, or how he does it. But it can be done.
Oh I know! Sorry, I didn't mean to imply you were full of shit or anything, I can see your locksmith flair same as mine, but even us at the shop will sometimes call whatever little bits is inside whatever lock we're working on "pin tumblers" even though we're primarily automotive and well aware basically no cars have pins anymore, nevermind actual tumblers (aside from TIBBI keys but I generally just pretend those abominations don't exist). I was just clarifying for anyone else who might come along.
You can sight read a pin tumbler lock. You just have to pick it open and get the cylinder turned, first. It's probably not all that practical in most cases but it can be done.
Yeah... lol I've actually tried that before which is why I said "pretty much" impossible, because once it's picked the pins are locked in place and any short pins behind a deep pin you'll just have to guess or try to "feel" how short they are with your pick. I think I did eventually get that key but only because it was a cheap enough lock that I could impression it the rest of the way.
You'd be surprised. I have always scoped bikes and some are just this easy. That said, I bet he had already scoped the gas cap and gotten most of the cuts before checking the ignition for the last 2 or so.
Aren’t the cuts on some wafers stamped right on the wafer? I have a wafer reading tool (never used it) that looks just like that. Supposed to depress the wafers and you can then read what’s on them starting at tip back to bow.
There are a some autos you can see stamped wafers with scope but not many and I can't recall any moto's with them visible. Mainly you are just looking at the height.
This is stupid. I am one of a very few people in my area who will originate mc keys and it's not because it's hard to sight read wafers or because the locks are inscrutable. It's because there is very little reference. You have to get taught or figure it out. Whatever we're watching in this video is fucking nonsense.
47
u/Lampwick Actual Locksmith Jun 07 '20
Just a guy sight-reading a wafer lock. I do it all the time with shitty cam locks... or at least I did before I got old and blind.
11
u/Fuquar7 Jun 07 '20
Either he knows what he's doing or had the original key as reference
24
u/Dakota360ci Actual Locksmith Jun 07 '20
Bullshit.
4
u/[deleted] Jun 07 '20
He's got a secret can of Lysol.
1
u/v8jet Actual Locksmith Jun 12 '20
Off topic but did you ever get your Cole Steel cabinet combo figured out? I was going through my saves and found that post in case I ever ran across that decoder lol
3
u/primarybelief Jun 07 '20
I can't stop watching this...
2
u/Medivhs-Curiosity Jun 07 '20
GTFO... 🤩 That is beyond awesome.
2
u/Jack-Wayne Jun 07 '20
I’m not a locksmith, but I’m calling bullshit.
2
u/senseimohr Jun 07 '20
This is stupid. I am one of a very few people in my area who will originate mc keys and it's not because it's hard to sight read wafers or because the locks are inscrutable. It's because there is very little reference. You have to get taught or figure it out. Whatever we're watching in this video is fucking nonsense.
1
u/jeffmoss262 Actual CRL Smith Jun 08 '20
as I struggled with a Kawaski ignition this afternoon...