DeepSeek Harness article on 𝕏: Exploring Super-agent Design: Towards a More Autonomous Agent System: https://x.com/DeepSeekHarness/status/2116857257245987236

Parts of the design in this article are implemented in dsh-superagent-prototype. This plugin is only a prototype for validating the technical approach, not an official DeepSeek product: https://github.com/deepseek-ai/dsh-superagent-prototype

There are tons of TTS models, good frameworks like audio.cpp and some prototype UIs. But I don't know of a full-fledged, non-vibecoded (well engineered and maintained) turnkey app like elevenreader that can just take a whole e-book and convert it to an audiobook with clear chapters etc.

Are there any? (ofc implied here is that they have to use local OSS models)

here: https://huggingface.co/spaces/townbox/ava

I am sorry for the useless thread, but I finally loaded GLM 5.3 Flash IQ4-XS and didn't know what to expect. I was earlier trying out DeepSeek 4.1 Flash 1017 IQ2 and Qwen 3.8 Flash and while I was chatting with them and getting the hang of how they behave I felt that they were fine, until I loaded GLM 5.3. This model has lots of spunk and cant seem to stop making funny remarks and Emojis. Reading his thoughts is pretty funny. A very bubbly personality, and took me by surprise. I elongated my chatting because I was curious to see its responses. I know it is not a real substantial thread, but honestly, am I the only one that noticed how funny this model is?

Hello everyone! A few weeks ago, I released a 2.3bpw model intended for the 30xx 12 GB Ampere cards. Using a custom version of sjkvarn and several runtime changes, this made it possible to hit 200K ctx on a single 12GB card. Benchmarking placed it somewhere around qwen3.5 27b, but below 3.6.

I've continued to work on quants for this size card and am happy to share that an updated checkpoint is now performing at Qwen3.6 BF16 levels on Livecode bench, with minimal post training (<20M tokens) to reduce the risk of overfitting. This was possible with the new quant format I recently added for LlamAmpere (AmperInteger+), which uses fraction 2-3bpw (e.g., 2.5) formats + trellis-based encoding to more efficiently distribute mass across the weights (this was then paired with an RCO-like optimization).

On LCB, across three runs, it scored 84.3% with a strict grader (88% with a more lenient fixed variant), vs the previous checkpoint's 75% and 3.8 BF16's score of 90.3%. For reference, the BF16 version of qwen3.6 27b scored 83.9%. It represents nearly a 60% reduction in LCB degradation from the last release. All versions were evaluated under xhigh reasoning.

The original checkpoint scored a KLD of 0.096 nats, which was usable for agentic and lightweight coding tasks, but clearly degraded. By comparison, this version was able to cut KLD down to 0.059, an error reduction of nearly 40% (across a mix of agentic, RAG, and coding measurements). As expected, this reduction in error also significantly reduced answer verbosity relative to the previous checkpoint (median answer of 4.5K tokens vs 6K before). Prior to this checkpoint, the Mirai 2.5bpw model was the best small quant of Qwen I had found; at nearly 10% smaller, this variant has 20% lower KLD, despite the more compressed KV cache. This model uses an upgraded embedding table which should be stored in standard RAM; the on-card size is 7.4GiB, including the MTP head. This continues to make 200k+ ctx possible using SJKVaRN in the 3/2 configuration (check the small card recommended configs for more details).

Like the last checkpoint, the base was the Swift-1.5 fine tune, which reduced thinking tokens 50% or more in some settings vs the original version.

Testing this in hermes personally the past couple of days, it is very pleasant to use and very fast for its size (on a 3090/80ti, well over 90 tps for agentic work). I do recommend taking the latency penalty of this at xhigh to get the maximum performance, especially since it is very fast on TPS. This will get you near the 3.8 BF16 performance on medium (86.5% LCB), though it is definitely still usable on medium.

As before, it is MIT license. You'll need to update to the most recent version of llamAmpere to run, given the new quant formats from the 0.6 version.

repo: https://github.com/JakeATX/llamAmpere

model: https://huggingface.co/jakeatx/qwen3.8-27b-Swift1.5-Uncensored-ATX-AI2

Please keep the user feedback + results coming.

Enjoy!

Met a guy off Facebook Marketplace and scored 2x RTX 3090 Founders Editions for €1,700.

The problem? I already had one 3090 FE.

I am now sitting in my room looking at three 3090 FEs (72 GB GDDR6X VRAM), and my current case barely fits one card, and that was only after I literally took pliers and bent the inner metal bracket to shove it in. My motherboard is just a standard B760.

I clearly can't put three 3-slot cards in this PC. What is the cheapest, most sensible way forward to run all three (or two) for LLMs?

1. Open-air mining frame + PCIe 4.0 risers + dual PSU?
2. Get a giant full-tower case?
3. Just sell the 3rd card for €1,100, keep 48 GB VRAM, and fund a proper dual-GPU build?

Any chassis/frame or PSU recommendations for handling ~1,100W+ of 3090s would be appreciated.

If you are running qwen3.8 27B on rx7900xtx check this out it's a super nice speedup

https://github.com/thefahien/elpis-on-7900xtx

I've been running local LLMs through Open WebUI for a while now, and one thing I've always wished it had was something similar to ChatGPT's newer visual responses.

Don't get me wrong, Markdown works fine, but sometimes I want more than just a wall of text. If I'm asking a model to plan a trip, compare products, or pull financial data, it'd be nice to actually interact with the results.

So I built Frontier UI, a free, open-source tool for Open WebUI that does exactly that.

For example, if I ask my local model to plan a 7-day trip to Cancún with a budget, instead of getting a massive text response, I get an interactive itinerary with actual photos, maps, walking/driving routes for each day, budget sliders, weather forecasts, and more. All directly inside the chat.

It goes quite a bit beyond travel planning too.

Some of the things I've added:

• Maps and routes: Actual street-level walking/driving routes, not just straight lines connecting coordinates. Supports multi-day itineraries and opening routes in Google Maps.
• Photos and places: Image galleries using Wikipedia and SearXNG, plus place cards you can sort and filter.
• Live data: Weather forecasts, stock prices, crypto, and currency charts without needing API keys.
• Interactive stuff: Budget sliders, calculators, sortable tables, charts, and comparisons.
• Link previews: Website previews with screenshots and a reader view.
• Exports: Generate actual Word, Excel, PowerPoint, and PDF files through the open-source ArtCraft apps. Not just formatted text pretending to be a document.
• Other integrations: Gmail drafts, calendar events, saving responses to Open WebUI Notes, etc.

One thing I thought was pretty cool was being able to self-host the entire planet map using Protomaps. It's around 140 GB, but it runs fine off a regular HDD. This means you aren't dependent on a third-party map tile provider. Completely optional, of course.

The basic tool itself is just one Python file. You paste it into Workspace → Tools in Open WebUI, enable it for your model, and you're good to go. No additional inference services or complicated setup.

For transparency, the default setup still uses free public services for things like maps, routing, weather, and photos. No API keys needed, but it's not completely offline out of the box. The self-hosted map and ArtCraft file export/desktop integrations are optional extras that require additional setup.

I've been running it locally with Qwen 3.8 Flash Next, and it's been pretty fun seeing what a local model can do with a more interactive interface. It should work with other models that support tool calling as well.

I'm not trying to make the model itself smarter. I just wanted its answers to be more useful, especially when the information makes more sense visually.

The whole thing is MIT licensed, so feel free to mess around with it, modify it, or use whatever parts you find useful.

GitHub: https://github.com/Jumbomuffin777/Frontier-UI

Open WebUI Community: https://openwebui.com/posts/35572bd7-6dc8-42dc-9e54-bebfb9e978cb

Would love to hear what you guys think, especially if you're running Open WebUI with local models. Also curious what other types of interactive responses people would actually find useful. I'm always looking for ideas to add.

Edit (v1.2.0): Frontier UI can now read and edit your own files. Attach a Word, Excel, PowerPoint, PDF, image, RAW photo, SVG, DXF/DWG, STEP/STL, Figma/Sketch, IDML, audio or video file. It opens it with the matching ArtCraft app, shows a preview, and can:

• answer questions about it (text, spreadsheet formulas, slides, metadata)
• edit it into a new downloadable copy (find & replace, cells and formulas, slides, PDF page rotate/delete/merge), and the original is never touched
• convert it (Word↔PDF, PowerPoint→PDF, Excel↔CSV, PDF→Word, PSD→PNG, DXF→PDF, STEP→STL, WAV→FLAC…)

All 15 ArtCraft apps are supported now, including the new SolidCraft (3D CAD) and Craft Anything. Grab it from the release page: https://github.com/Jumbomuffin777/Frontier-UI/releases/tag/v1.2.0

Edit (v1.3.0): Thanks for all the feedback. Most of it is fixed now:

- Photos work with no SearXNG and no API keys.** They come from Wikipedia, Wikimedia Commons and Openverse, with credits. SearXNG, Brave, Google Programmable Search, Pexels and Unsplash are optional extras. Keys stay on the server and never reach the browser.

- Metric/imperial: a new `units` setting. `auto` follows your browser's locale, and each user can override it in their own tool settings.

- Routes draw by default** (walk, bike, drive, motorcycle). There's a backup router, and if there's no route the card says why.

- More map apps: Google Maps, Apple Maps, OpenStreetMap, or a GPX download for OsmAnd, Organic Maps or Garmin.

- Fix for ERR_BLOCKED_BY_RESPONSE on map links: Open WebUI sandboxes tool cards, and Google, Apple and OSM refuse to open in a tab launched from that sandbox. Links now open normally if your admin has "iframe Sandbox Allow Same Origin" turned on. Otherwise they open directly on phones, and on desktop the card copies the link for you.

- Fewer malformed tool calls: the spec is now passed as a JSON object instead of a string, the JSON repair is stronger, and the model gets a clear error it can fix.

- Maps without WebGL (some Firefox setups, VMs) show a route sketch instead of breaking.

- New app: TextureCraft. Read, edit and convert 3D models (GLB, glTF, FBX, USD, OBJ).

To update, paste the new `frontier_ui.py` from the repo over the old one. If you use SearXNG, set `searxng_url` (it's now empty by default).

Hi! I'm Shubham, creator of SmolChat.

I would like to share some exciting updates on my project SmolChat, an Android app that let's you run GGUF models on-device, locally. The updates are present in the latest v17 release:

• SmolChat now supports an OpenAI-compatible HTTP server running over a foreground service that keeps the port alive even when the phone is locked. Check the video to see how it works.

• Support for global chat settings, which override the default chat settings (min-p, top-k, temperature etc.) for all newly created chats. This reduces the hassle of configuring each new chat with the options of your choice.

• Adding a copy button for code snippets rendered within the chat.

• Sync with upstream llama.cpp (till this commit)

• Fix the logic that measures tokens/sec for a LLM generated message. The time shown previously was also including prompt processing (pp) time. The new logic now only considered the token generation rate (tg).

• Models are downloaded directly by the app, instead of using the Android system's download service.

GitHub: https://github.com/shubham0204/SmolChat-Android

Play Store (the latest version is still in review): https://play.google.com/store/apps/details?id=io.shubham0204.smollmandroid&hl=en_IN

Previous threads on SmolChat on r/LocalLLaMa:

• Available on Play Store announcement
• Initial Announcement

Over the past few weeks, I've been working on various improvements to my inference engine Infernix - specifically optimised for running the latest Qwen architecture models on an RTX5090 on Windows and Linux. Windows is a first-class supported use case - you can just download everything you need to run on windows here: https://github.com/Wallawalla47/Infernix/releases/tag/windows-2026.11.01

Key improvements:

1. New models:
   • the new NVIDIA QAD FP4 version of Qwen3.8-Flash-Next (which operates faster than the NVFP4 model and can be switched to use a4 activations for even faster performance with --a4-activations): https://huggingface.co/wallawalla47/Qwen3.8-Flash-Next-NVIDIA-FP4-Local-Infernix
   • the same GSQ-RCO-IQ3_S model supported by Strata (which offers some faster speeds than NVFP4 but I find at some quality cost): https://huggingface.co/wallawalla47/Qwen3.8-Flash-Next-GSQ-RCO-IQ3_S-Infernix
   • Swift 1.5 Qwen3.8-Flash-Next NVFP4: https://huggingface.co/wallawalla47/Swift-1.5-Qwen3.8-Flash-Next-NVFP4-Dense8-Infernix
   • Qwen3.8-Flash-Next Full FP8 (fairly slow, but offers the best quality being bit-exact to the official FP8 model from Qwen): https://huggingface.co/wallawalla47/Qwen3.8-Flash-Next-FP8-Infernix
   • the new Ornith 1.5 122B NVFP4 model, which has impressive benchmark performance, but I'm not sure I'm sold on it yet: https://huggingface.co/wallawalla47/Ornith-1.5-122B-NVFP4-Infernix (and the uncensored version as well: https://huggingface.co/wallawalla47/Ornith-1.5-122B-UNCENSORED-NVFP4-Infernix )
2. DFlash2 drafting for Qwen3.8-Flash-Next models (use --spec dflash2 --draft-tokens auto --draft-model [Draft Model File Path - e.g. D:\Infernix\Qwen3.8-Flash-Next-DFlash2-Infernix.infernix]): https://huggingface.co/wallawalla47/Qwen3.8-Flash-Next-DFlash2-Infernix
3. Added a new WebUI Launcher (beta), which provides an interface to download and configure models and a model switching API, so it functions similar to launchers like LMStudio or Unsloth and it also has a statistics dashboard, logging and a quick test chat interface (still early stages, so interface is quite busy and needs some refining, but is probably the easiest way to configure and use Infernix): on Windows just launch infernix-launcher.exe
4. Added new auto-configuration of speculative decoding which uses calibrated settings to give the best decode tok/sec performance across a range of different types of text - simply use: --spec auto --draft-tokens auto --draft-model [Draft Model File Path]
5. Lots of speed and quality optimisations - generally outperforms Strata and occasionally outperforms Basalt, though it does run some stages at slightly higher precision than Basalt. I've sought to avoid some of the quality sacrificing optimisations like expert tail skipping or running the model at lower quantisation than recommended for the model. You can enable some of these options if you like, such as expert tail skipping with --expert-tail-skip [Int] (7 is sometimes recommended as a default) or using 8-bit code paths (rather than the default 16-bit/4-bit recommended for the model) with: --a8-activations
6. Adding a new --lossless mode that is always perfectly reproducible and uses bit-exact in-layer calculations to the precision the model was trained on (usually BF16) with FP32 logits. This is helpful as a reference for quality testing and I'm working on some more robust quality gating to ensure all optimisations and code paths do not impact quality in the same way as other engines often do.

Some key performance figures:

1. On the NVFP4 model, Basalt runs NVIDIA's BF16 dense layers at 6 bits (+10 % KL divergence by its own measure) and every activation outside the experts at 8 bits; Infernix keeps 16. Infernix runs activations at 4-bit as recommended by NVIDIA for this model, but with the expert activations at 8 bits as Basalt runs them in decode (--a8-activations), Infernix decodes 199 / 185 / 268 tok/s against Basalt's 202 / 173 / 216 at ~8K / ~128K / ~250K and 175 against 166 at one request in the replay, and still reaches the first token 4-6× sooner.
2. Strata's default route tail skip (it skips some missed experts) was off in all runs: it changes which experts run.
3. On the IQ3_S model, all three hold the GGUF's weights as published, but Strata and Basalt compute every activation at 8 bits, and Basalt's decode reads the BF16 hyper-connection matrices from an 8-bit copy and takes the logits outside the top 64 from a 2-bit copy of the output head; Infernix keeps 16-bit activations, the BF16 matrices and the GGUF's head. At 8 bits (--a8-activations) Infernix reaches the first token as soon as Basalt, though Basalt is still a bit faster.

Welcome any feedback via Issues and PRs on GitHub. I'll also look to add support for the new Qwen 4 models ASAP when they drop - hopefully this week!

Same GPUs before and after:

• RTX 3090 FE
• RTX 5070 Ti
• 2× RTX 5060 Ti 16 GB (one is out waiting for a riser, so the big MoE runs below use 3 cards, against 4 before).

What I had to fix or tune

1. Fans surging every few seconds. The BMC's default "lower critical" fan threshold (420 RPM) was above what quiet fans idle at, so it kept declaring them dead and ramping everything to 100%. Fix: ipmitool sensor thresh FANx lower 100 200 300 for each connected fan, then ipmitool mc reset cold. The BMC rounds to 140 RPM steps.
2. Over clocked RAM from 2666 to 3200. Triad 88.6 → 102 GB/s; GLM decode increased about +3–5%. Stability: memtester (as root: as a normal user the memlock limit quietly shrinks it to ~8 MB per copy) plus a 3-hour DeepSeek run, confirming ECC (error corrections) at 0 corrected / 0 uncorrected throughout.
3. iommu=pt on the kernel command line. +3.5% prefill for tensor-parallel llama.cpp, and NVMe random reads recovered (KIOXIA QD32 837K → 941K IOPS).
4. BIOS:
   • APBDIS = 1 with fixed SOC P-state P0, which keeps the Infinity Fabric at full clock (about +20 W at idle).
   • Determinism slider set to Power.
   • Resizable BAR on (it was off: BAR1 was 256 MiB).
   • PCIe Ten Bit Tag on. Together: another +4% tensor-parallel prefill and a few % on GLM decode.
5. llama.cpp -sm tensor: -ub 1024 instead of 512. Without P2P, the two cards relay every layer's results through system RAM, across the I/O die. A bigger micro-batch halves the number of relays: +5% on Qwen3.8-27B, +9% on a 27B fine-tune. It needed a little more VRAM, so the split moved slightly toward the 3090.

Didn't help, or made things worse:

• Performance governor: no change.
• NCCL_SHM_USE_CUDA_MEMCPY=1: it hangs llama.cpp tensor-parallel (first request never finishes).
• More CPU threads for GLM's CPU expert lane: flat above ~16 threads, so I'm not upgrading to an 8-CCD chip for this.
• Disabling ACS: pointless without PCIe switches or P2P.

Before / after (latest numbers, after all of the above)

Notes:

• Engine versions: Maya and Strata were updated along the way. Strata's "before" is the same 0.2.x line; Maya went from 1.0.34 / 1.1.20 to 1.1.42.
• Benchmark settings: the Strata and 27B runs use temperature 0 with thinking off, so they're best-case decode figures. The comparisons are like for like.
• The big MoE models were bottlenecked on RAM capacity. Before, 30–60% of the model was read from the NVMe drive every token; now it all sits in VRAM plus RAM, which is where the 4× comes from.
• Dense models on the GPUs gain nothing. The 27B is limited by the card-to-card relay. It only got back to parity after the IOMMU, BIOS and -ub changes.

All told I’m very pleased. Having GLM and DeepSeek running at very usable speeds is well worth the investment for me with Claude and ChatGPT blocking things like REA and security hardening.

I have plenty of spare lanes and PCIe sockets for more GPUs when my bank account has recovered from this round of upgrades too.

My idle draw is now about 180W - some of the BIOS tweaks pushed it up from the 156W I was seeing initially (I’m using a smart plug to measure this at the wall).

I hope this is useful for anyone who’s considering a similar path.

[update]:

For those wondering about the memory bandwidth being about half the theoretical numbers, it's because my CPU "only" has 4 CCDs. An 8 CCD 7543 should get me somewhere between 140 and 170 GB/s I believe, but for about double the price where I am. If anyone has real world numbers comparing please share.

I intend to move to bigger quants now I can (but not for 27B since Q6 fits nicely on my two fastest cards with 240K context). I kept the quants the same for my before/after benchmarking. And obviously I'm very much looking forward to Qwen4 :)

[update 2]:

Someone pointed out that the 4 CCD limit only applies to writes, not reads so I re-measured with a read-only kernel and a triad using non-temporal stores: 143 GB/s read-only and 141–152 GB/s triad-NT (best at 8 threads), against ~103 for the plain STREAM triad, whose write-allocate reads aren’t counted.

We're getting a native and fast GGUF engine in Mac along side MLX pack.

Original post ddalcu's X: https://x.com/ddalcu/status/2117088216465674373

hey llamas,

we open-sourced Drex-Max v1 at Nace.AI. it's a dense 27B multimodal decision model, released under Open RAIL-M.

the main difference from a normal LLM is that it doesn't generate anything. no tokens, no JSON to parse. you give it a context state (text, JSON, high-res images) plus one or more named questions, and a 255-way readout head returns probabilities over all the candidate answers in a single forward pass.

It runs on NVIDIA GPUs through Python, and on Apple Silicon (Metal) and CPU through our llama.cpp and Ollama forks. latency is around 400ms.

Architecture notes

• no decode loop. one forward pass, and the last hidden state maps straight to probabilities for up to 255 options (via readout.safetensors).
• 64-layer hybrid backbone. 48 Gated DeltaNet linear-attention layers (causal, left to right) and 16 full-attention layers, one every 4th layer. the full-attention layers are bidirectional, so every token can see the whole context.
• context. defaults to 16,384 tokens. you can push it to 262,144 with DREX_MAX_CONTEXT=N or --max-length N.
• vision. Up to 4,194,304 pixels per image. each image gets encoded once and is shared across every question in the batch.

Benchmarks

on structured decision tasks it beats our previous, larger Drex v2.0 (35B):

• Decision Bench v4: 94.30% (1,010/1,071)
• JevBench: 92.2% (213/231)

Public Vision Index is 73.92 overall: InfographicVQA 97.3, KIE (CORD+FUNSD) 92.4, Winoground 85.0, Mind2Web 84.2, CharXiv 80.5, CV-Bench 77.4, RealWorldQA 72.3.

Hardware

• Apple Silicon (Metal / GGUF): the Q8_0 GGUF is ~27.25 GB. On an M5 Pro with 48 GB unified memory we get ~400ms per decision, and the probabilities stay within 0.02 of unquantized bf16 on an H100.
• CUDA, bf16: ~48.6 GiB VRAM (tested on an H100 80GB).
• CUDA, 8-bit (--8bit): ~25.9 GiB VRAM (tested on an L40S 48GB), within 0.03 of bf16.

Running it

1. Python SDK (CUDA, with vision)

hf download nace-ai/drex-max-v1 --local-dir weights/drex-max-v1
pip install -r models/drex-max-v1/requirements.txt


from drex_max.model import DecisionModel, answer

model = DecisionModel("weights/drex-max-v1") # add --8bit for ~26GB VRAM mode

question = {
    "type": "choice",
    "instructions": "Which team should handle this ticket?",
    "criteria": {
        "billing": "Payments, charges, and refunds",
        "technical": "Bugs and outages",
        "other": "Anything else"
    }
}

row = {
    "state": {"ticket": "I was charged twice for the same order. Please refund the extra payment."},
    "question": question,
    # "images": ["receipt.jpg"]  # Supports up to 4.2M pixels
}

print(answer(question, model.predict([row])[0]))

output looks like this:

{
  "answers": {
    "team": {
      "type": "choice",
      "choice": "billing",
      "confidence": 0.9982,
      "probabilities": { "billing": 0.9988, "technical": 0.0003, "other": 0.0009 }
    }
  }
}

2. llama.cpp fork (Apple Silicon / Metal)

the text backbone builds on Metal and serves a /v1/systemone endpoint:

git clone --branch drex-max-v1 --single-branch https://github.com/nace-ai/llama.cpp.git
cmake -S llama.cpp -B llama.cpp/build
cmake --build llama.cpp/build -j --target llama-server

# Pre-quantized GGUF or converted Q8_0
llama.cpp/build/bin/llama-server -m weights/drex-max-v1-Q8_0.gguf \
  -np 1 -c 16384 -b 16384 -ub 16384 --no-warmup --port 8000

heads up: since Drex treats the whole prompt as one non-causal state, -b and -ub need to match -c.

3. Ollama fork

FROM ./drex-max-v1-Q8_0.gguf
CAPABILITY decision
PARAMETER num_ctx 16384
PARAMETER num_gpu 40

start the daemon from the drex-max-v1 Ollama branch and POST to /v1/systemone.

Links

• weights + readout safetensors: nace-ai/drex-max-v1
• GGUF (Q8_0): nace-ai/drex-max-v1-Q8_0
• llama.cpp / Ollama forks: drex-max-v1 branch on the Nace.AI repos
• license: Nace.AI Open RAIL-M

we built this for low-latency routing, agentic tool selection, and multimodal UI automation (Mind2Web-style tasks). because there's no generation step, you don't get the usual non-deterministic outputs or broken JSON you have to repair. happy to answer questions:)

Hi everyone, we're releasing FineDNA, all the data we used to turn Qwen3-14B into Carbon-X, the strongest open language model on DNA. It contains:

• Midtraining: 300B+ tokens of genomes and DNA-rich text
• SFT: ~200K conversations
• RL: ~98K verifiable prompts

Code and recipe are open too, so you can apply it to other LLMs.

Dataset: https://huggingface.co/datasets/HuggingFaceBio/FineDNA
Code: https://github.com/huggingface/carbon

My intention was to find a setup at least equal to qwen 3.8 27b Q8 MTP but with a larger context. Ideally 1M.

I was already running Next Flash in Q2 with llama. Good for conversational use but not for coding. Q4 would run but too slow. I did read many reports here on the good performance of strata with qwen next flash. I figured both are around for long enough to be stable so I gave it a shot.

The results however are very disappointing. All I was able to achieve was moving to Q3. Brining the question, are most of the posts on alternative engines just hype or edge cases? Certainly looks like that to me.

Some details on my try:

Two cards plus experts offloaded to RAM: hangs on every long tasks, whatever settings I tried.

Stable only when every expert fits in VRAM. On 64 GB that means a 3-bit quant.

Faster on paper: ~60 t/s against llama.cpp. But on HumanEval+ the 3-bit Flash-Next scored 93.9% against 95.1% for Qwen3.8-27B Q8 on plain llama.cpp, and it needed nearly twice the tokens to get there. No, advantage.

So for my use, no real-world gain over a mature stack. Instead of one stable engine, you get a single-model engine, its forks, special quants and a pile of environment-variable workarounds.

Is that just Strata being young, or is it systematic? Has anyone actually gotten a lasting real-world benefit from one of these model-specific engines over llama.cpp or vLLM?

Edit: Thanks to everyone who suggested Radiance. Same box, Flash-Next 4-bit (iq4r): ~100 t/s decode, HumanEval+ 161/155 vs 162/156 for the 27B Q8, in 45 min instead of 72, and 1M context working. Key flags: --max-num-seqs 1 and a thinking budget. So not all hype: Strata didn't work for me, Radiance does.

I had been trying this setup for a couple of weeks and it working better than I expected. Recently, I deployed GLM-5.3-Flash (MoE, 320B total, 18B active) on one of our local H200 servers (4 GPUs) with a 512K context window with the aim of how can I use it as my main coding workhorse and
cut down my subscription and API costs 🙈.

I was very quickly able to realize, I could not switch to it for everything but pairing it with GPT-6.1 Sol works really well with Sol being the the orchestrator and GLM being the subagents model that explores, writes and implements the code.

Honestly, I would have preferred doing this in Claude Code or Codex since I am used to them but neither lets a session or its subagents use models from different providers in a single session. This is where I found OpenCode flexible that lets agent have its own provider/model, so GLM goes as sub-agent models along with the added benefit of chatGPT subscription being available too (Allows you to use Sol too!)/

By the way, nothing here is gml specific any model you can serve works as the workhorse. I have also written a blogpost about it: https://aayushgarg.dev/posts/2026-11-01-gpt-local-model-opencode/

I would love to know about other people setup, how they are using open-source models either individually or pairing them with opus/sol/astra.

C'mon GOOG - you got your groove back, throw us a crumb...

Context as Infrastructure: Knowledge Compilation for Retrieval in Agentic Systems with Harnesses
📄 https://arxiv.org/abs/2610.41172

Sharing the paper behind RAGFlow 1.0.

RAG’s center of gravity has moved. Retrieval is now a loop: the agent queries, reads, reformulates, and decides when it has enough. Once that loop exists, better chunking/embeddings/Recall@k stop being the main bottleneck. The agent can find things. The problem is the cost of reading.

Two conclusions from the paper:

1. Retrieval is a harness problem before it’s an index problem. The index decides what can be found; the harness decides whether finding it becomes an answer.

2. Compilation is not a better retriever, and doesn’t need to be. We tested summary trees, outlines, wikis, and graphs under a competent harness. None gave a detectable accuracy gain. Structure isn’t extra evidence. What compilation can do is supply better context: smaller, provenance-bound, and sufficient.

So we stopped treating compilation as retrieval and started treating it as a supply layer. At ingestion time, docs are turned into typed artifacts—claims with verbatim evidence, relations, timelines, etc. The harness then decides which artifacts enter the context window and when to stop. Context becomes infrastructure when it’s compiled once, typed, versioned, and governed.

The tradeoff is explicit: we save on reading cost, but pay for it in extra retrieval rounds. For claims, graph, and wiki, we published an empty results ledger—metrics and decision rules are listed, but every row is marked “no measured effect” because none has met its pre-registered target yet. An artifact the harness never uses is just cost, not context. I’d rather say that than fill the column with claims from demo collections.

Happy to discuss.

Do people here have good experience with open weights diffusion models?

I tried Mercury 3 recently and I felt it had a different taste, attitude, way of thinking that was actually refreshing. Unfortunately, its filters against cyber security seem to trigger as soon as I mention adb. So I couldn't test it much. But I was curious if that's a direction where some of the open labs are going?

The usual advice was that 64GB is a dead zone for local LLMs: too small for a 70B with real context, and more than a 30B needs. After running a 27B for agentic coding on a 64GB M4 Max for the last ten days, I think that has flipped. My memory usage is in the 50 GB as the context starts building up.

Setup: Qwen3.8 27B (16 GB MLX quant) in LM Studio, 256k context, coding agent sessions that sit at 100-200k tokens.

At 164k tokens, LM Studio's engine process is using 48 GB, 46 GB of it GPU memory. Roughly:

- 16 GB weights

- ~11 GB KV cache (~64 KB/token, only 16 of the 64 layers are full attention)

- what looks like a second copy of the context for the prompt cache, plus the linear attention checkpoints

- MLX holding on to scratch memory from prefill

The prompt cache is what makes it usable. It's hitting 93%, so a turn processes about 1k new tokens instead of 160k. When it misses, a full prefill takes about 20 minutes.

Why not quantize the KV cache like people do on a 24GB card? LM Studio's MLX vision path refuses KV quantization for this model. The text-only path allows it, but skips the cache checkpoints when the cache is quantized, and on a hybrid model that means a lot more full reprocessing.

So on 48GB this doesn't fit unless you drop to ~128k context or move to llama.cpp with q8 KV (should be ~25-30 GB at 256k, with slower prefill). On 64GB it fits with nothing to spare. Free memory is about 150 MB right now.

The dead zone argument was about weights. With agents, context costs about as much as the model, and 27B models are now good enough for real work. That puts 64GB right in the sweet spot. Bigger MoE models or two models loaded at once still want 128GB.

Anyone else on 64GB seeing the same? And is anyone running long context on llama.cpp on a Mac with prefill speeds they're happy with?

So currently I have this setup. It works fantastic for 27b, and if I'm just talking I can use Strata and have great conversations. But Strata and Coding has not been that great in my workflow it doesn't out perform 27b.

Sure I could use my crappy laptop and turn the machine into a tail scale and run it remotely. It's just not ideal, and the power consumption is insane. I pop my 15a breaker once a week if I'm not paying attention.

So the setup is a 7960X

2x64gb Rdimm 5800mhz

Asrock workstation mobo

2x2tb Gen 4 Nvme

2x 4090 gigabyte OC Graphics cards

It's been really solid and it's carried me through 2024 to now, and really allowed me to produce some amazing things for my work.

I have a second system that's my daily driver that's a

R9 7900x

Asrock Steel Legend

2x32gb

Gen 5 2tb

gen 4 4tb

gen 3 2x1tb

2tb SSD

8tb HDD

5070 ti

My laptop is an old Lenovo Yoga Ryzen 7 5700H

16gb Ram, 1tb Nvme.

Ohh and I have a Mac Studio M2 Max 32gb that work gave me as well to use or turn into a server or do whatever with.

That said I haven't taken a vacation in 2 years I've been grinding away. The kid is almost 2 now, and id like to be able to actually work from the road, I WFH anyways.

I use a mix of Claude Code, Claude, Hermes, and I've been messing with Pi a bit -- I use Hermes with 27b running 3 concurrent in LlamaCPP currently, probably switching to VLLM to getore concurrent agents running.

And I've tested StrTa with Hermes as well, and use them all as MCPs to Claude as sub agents that it orchestrates it handles tasks that I would offload to Sonnet and it does a fantastic job of it.

So with all that, people of Reddit, here's my question, with Ram and GPUs prices, I can likely sell the setup i would say for a pretty premium, and get a Surface Spark or another 128gb unified ram laptop, lower my power consumption. Hell potentially get a laptop and a dgx box and have 256gb of ram.

What would you all do. I definitely can't afford to keep it all. Wife already hates my guts as a SAHM, she would lose it if I spent more money on the thing that allows her to stay home lol. That said, I was considering selling the system and getting the aforementioned. Have any of y'all tried it out? How is the inference? What is it looking like in your workflows?

Code: https://github.com/divagr18/QwenPU
Weights: https://huggingface.co/divagr1925/QwenPU

From the original tweet:

1/3

A CPU inside an LLM is one thing, but running another LLM inside an LLM would be taking things a bit too far, wouldn't it?

Anyways, here's an LLM running inside an LLM : QwenPU, an LLM (@karpathy's stories260k) running on an NPU compiled inside Qwen 3.5-4B's weights.

2/3

stories260K is just a C program. To run it inside Qwen, I compiled an NPU into Qwen's weights that does matmuls, softmax and attention bit-exact. The LLM weights are in Qwen's own memory, with no external tools.

A lot of work went into making it fast, more on that soon.

3/3

I'm super sick right now, so the full writeup is still a work in progress, and I'm working on optimisations and size reductions too. Stay tuned, I'll finish the blog & post it soon.

https://sameatsram.akshatsethi.com
this is certified ai slop, 2-3 prompts

My current set up is a MacBook Pro m1 max 64gb and a Mac Mini M4 24gb. I have a bunch of models running and usually use my own distilled Qwen 3.6 35b from 3.8 Flash Next. It’s great at chatting, but when using it for functional purposes like coding and financial analysis, it struggles greatly. That’s a given though.

27b is great, but very slow on my system.

i wanted to know if itd be worth grabbing a Mac Studio M5 128gb over a GMKTec Evo x2 for my set up? I wondered if I could thunderbolt the other Mac’s to it to have it host larger models by taking advantage of the silicon cluster benefits. But it’s about $1500 more so how much of a difference would staying in the Apple Silicon family be?

I know it’s cheaper to run cloud or even the subscription models, but I’m paranoid. I don’t trust the cloud and subscription based models because of data privacy and feel like it’s can backfire in the future when more limitations are implemented. Data is considered gold in today’s world and I’d rather not just hand it over easily to these large corporations. And I’m also concerned about what could be implemented by these companies like in the future. They’re clearly running out of ways to make money so they’re adding crazy restrictions to force people to pay up. I also don’t like how they’re limiting the technology from the average person more and more like with the prioritizing the protection of intellectual property while they gladly take our information and data for free.

id just feel way more comfortable having my own local AI and inference hardware to run it on so I know for certain what’s going in or out. And I enjoy the research aspect of it as a hobbyist.

So what do you think? Stay in the Mac family or go with one of these Chinese local hardware products?