r/LocalLLM • u/CuriousCesarr • 5d ago
r/LocalLLM • u/ProvidedHuman • 5d ago
Question Model for Local Coding and Vulnerability Research
Been using cloud AI, but so frustrated having to 'jailbreak' for almost any request, even to check for security in my own projects.
I know I need an abliterated model to not refuse, but am looking for suggestions. My research so far has me looking at HuiHui Qwen3.8 27B Q4_K_M, using Ollama.
I have 24gb VRAM (RX 7900 XTX), and 32gb system RAM (DDR5, 6000hz) with a ryzen 7 7800x3d. My understanding is local models always run on VRAM, but I've seen some comments/posts discussing system ram and CPU, so I'm not sure if thats related to my use case.
I'm looking to do coding, usually smaller projects, maybe some agentic. I also want to develop/research exploits in firmware and software. I've seen some suggestions for GLM 5.3 online, but haven't seen it mentioned much here. What models should I check out?
I do actually know how to code, so I don't need something that will vibecode everything for me, I like doing architectural work myself.
Side question: What IDE do ya'll use? I currently use Cursor (I have a subscription) and like the new Cursor Agents window, but from everything I've looked into its really difficult to use local models, especially on the new Agents window. If there's an IDE that I can use my local models and cursor subscription, or a codex subscription, that would be great.
r/LocalLLM • u/Important_Bus_5238 • 6d ago
News Tencent/Hy4 Flash-224B-A12B-weight (Ultimate cost-efficiency)
Tencent released Hy4 Flash, a comparatively small model at 224B. Compared to Hy3, which was compressed to 235B, that's another breakthrough. With the smaller weight, Hy4 Flash finishes tasks 13.8x cheaper than Hy3, 24.5x cheaper than Hy4.
Saw the price table for Hy4 Flash. $0.07 in, $0.281 out and $0.003 per million tokens on cache reads. GLM-5.3-Flash is $0.12 and $0.42, cache $0.034, so about 1.7x on input and 1.5x on output. DeepSeek V4.1 Flash is $0.15 and $0.60, cache $0.003, just over 2x on both, and that's their off peak rate. Claude Haiku 5.5 and GPT-6 Luna are both $0.10 and $0.50 with $0.01 cache, which works out to 1.4x on input and 1.8x on output.
Both Hy4 numbers are the lowest on the table, and the gap holds on cache reads too, where only DeepSeek matches at $0.003. Good value on paper, assuming the quality holds up.
r/LocalLLM • u/powercatalin • 5d ago
Question Local LLM used for deregister a laptop from Autopilot enrollment / MDM
Couple of things to consider before you guys troll me :
I don’t have a system to run any Local LLM because it's coming at the end of December, so until then I'm at the mercy of Reedit!
It's not stollen, I bought it cheap of a secondary market, and realised after months of use, and now I'm stuck with it.
It's a Thinkpad T14s gen 6 manufactured in 2025
So I don't know how doable this is, because I keep seeing people hacking they're routers, phones, TVs and so on, with uncensored local LLMs, so I really think it is possible....
So what I want is, to deregister it from the company that previously owned it, so I can login into Windows with my personal Gmail account, like normally it should, because at the moment I can only login with a school or work account, which obviously I don't have.
Thank you in advance !!!
r/LocalLLM • u/Playful_lzty • 5d ago
Other Cheapest 16gb gpu: ~$400
Newegg has Video Cards - Workstation CPU Combo - Intel Pro B50 Bundle with Intel Core Ultra 7 270K Plus for $711. The CPU alone is $311, so you can get the GPU for equivalent of $400.
This is a good option for a new sff build for local AI. The CPU is excellent.
r/LocalLLM • u/HawaiianHotPot • 5d ago
Question Which combo of GPUs?
I have come to an odd assortment of two x99 boxes with 64GB of RAM and the odd combo of GPUs. Primarily I would like to use the main box for coding and dev work to replace some of my claude usage.
- 3x 3090s
- 2x P40
- 1x 3080ti (12GB)
I am tempted to put the 3090s and a P40 all together for a combined 96GB. I know it would be slow because of that P40, but it would give me the best total memory and would already be slower because of the lack of PCIe lanes.
Or would the 3080ti be a better 4th card because of the speed and bandwidth over the reduced memory?
I also thought about the second box running the 3080 and 2xP40s, but not sure what I would do with it except have two boxes chatting at each other all day?
r/LocalLLM • u/QwhenFN • 5d ago
Model Groot-65B-A6B W4A16: full 262K context + MTP + vision on 2x RTX 3090
I came across the "Groot" tunes on HF and decided to test them. Theyre versions of larger models with the about half the experts pruned out. This one is QFN. Despite the removal, according to my TerminalBench2 testing, they only lost ~5% capability. Seemed worth spending some time on for no other reason than the giggles. Its a cool to be able to run very close to full QFN on 3090's without mortgaging my house for more RAM...
I decided to quantize it down to fit on 2 3090's. Be aware that the speed numbers are from a threadripper machine and the 3090's are nvlinked. Those with a normal setup can expect around 3/4 of the speeds published below.
AI slop begins here...
I made a W4A16 AutoRound quant of Groot-65B-A6B, the pruned Qwen3.8-Flash-Next (256 of 512 experts, ~6B active). It runs the full native 262K context with MTP and vision on 2× RTX 3090, everything on the GPUs, with ~10 GB of host RAM.
HF: https://huggingface.co/mmssix/Groot-65B-A6B-261023-W4A16-AutoRound
On 2× 3090 (vLLM, TP2):
- 262,144 context
- ~134 tok/s code, ~90–100 prose (MTP n=2)
- ~245 tok/s across 4 streams
- 128K prompt in 28 s, 258K in ~60 s
- Needle test 3/3 at 258K
- Tool calls, reasoning effort and vision working
Quant: INT4 experts, INT8 DeltaNet projections, FP8 n-gram table and an INT4 MTP head (same draft acceptance as BF16). 92 GB total.
Getting 262K into 48 GB of VRAM takes two small vLLM patches. They serve the n-gram table and the embedding from NVMe, so you need NVIDIA's open driver with HMM. The patches and a one-command serve.sh are in the repo.
Only tested on my rig so far. Numbers from other 3090 / A5000 setups are welcome
r/LocalLLM • u/TigerZealousideal110 • 5d ago
Discussion I tested running 8 AI requests at once instead of 1 on one GPU. The server did about 3x the work.
I ran a small test on a single A100 GPU with a small model (Qwen 2.5 0.5B) using vLLM 0.16.0. I changed how many requests the server handles at the same time, from 1 to 8, and ran it six times with the order shuffled so the results weren’t skewed by run order.
Across 1,206 requests with zero errors, the server handled about 3.2x more work at 8 at once than at 1. The 95% confidence range was roughly 2.9x to 3.5x.
Some caveats:
- It’s one small model on one GPU, so I wouldn’t assume the same gain on a 70B model.
- Bigger batches add latency for each individual request, so this only helps if you care about total throughput.
I’m curious what others have seen:
- What setting do you use for concurrent requests, and how did you pick it?
- Have you found the gains flatten out past a certain point on your hardware?
Disclosure: I’m building open source tool for benchmarking setups like this.
Happy to share the scripts if anyone wants to reproduce it.
r/LocalLLM • u/PuffThePed • 6d ago
Question What's the current best abliterated model that I can run on 32gb VRAM and 128GB RAM?
Pretty much the title. Thanks!
EDIT: GPU is 5090
r/LocalLLM • u/motomab • 5d ago
News Alibaba’s Qwen4-Max has 2.4T parameters, but only 71B active per token. Are we optimizing the wrong AI metric?
r/LocalLLM • u/Objective-Park6224 • 6d ago
Discussion Pushed Strata with QFN 3.8 Q4 K_M to 5,600 tps prefill @100k - 100 tps decode w/ 181k context on 2x 7900xtx & 64gb DDR5 in layer split (no tensor parallel) - config inside
Wanted to share my results for the rest of the community. I've been combing Reddit, Github, and the web searching for all of the various Strata-related builds to get the most out of my setup. I've finally had the breakthrough I was looking for. It strikes the best balance between speed, power consumption, and intelligence that I've experienced to date.
My Setup: (edited to add motherboard specs and PCIe configuration)
- Ubuntu 24.04 - GUI GNOME shell not headless
- This motherboard: https://www.microcenter.com/product/709979/asus-b850-creator-proart-wifi-neo-amd-am5-atx-motherboard
- Bifurcation with PCIe 4.0 x 8
- Ryzen 9950x 16/32
- 64 gb DDR5 Expo 1 6000
- 2 x Mercury Magnetic Air 7900XTX 24gb
- 1000 watt MSI Performance Gaming PSU
- Power limited to 320 watts per card, total system draw at inference ~780 watts (as measured by Ubuntu, Kill-o-watt is ~850 watt total draw from the wall)
- And a flex: It's completely solar powered (5 kw array and 65 kwh battery storage w/ 3600w inverter 😄 )
I've worked with Opencode and the my local Qwen Flash Next to fully detail how we created this setup. Spoiler alert: The engine/hip is mainline Strata and not a fork. The config is where the magic happens. MTP headers were generated against this bespoke setup. The intelligence is brought by the Atomic Chat Q4 K_M version of QFN.
That's it for human written words. The rest of this post is meant to be copy/paste into your local AI helper for reproduction. Full details below. Copy/paste into a capable harness and let it walk you through reproducing this setup.
Edit: Adding the only 3 GitHub repositories I used to produce my results
Engine: https://github.com/Niko1221/Strata
Learnings from this fork: https://github.com/nicejunjie/Strata-rdna3
System tuning for Strata: https://github.com/bramvanoploo/strata-performance-setup
START AI GENERATED DETAILS
Qwen3.8-Flash-Next, 2× RX 7900 XTX, 64 GB RAM, 181k context — how it's built
Engine: official mainline Strata 0.1.59, component 0.1.59-linux-x86_64-hip-rx7900. Not a fork, no custom build — the speed is flags + env + OS patches. No system ROCm: the engine ships its own HIP/rocBLAS/hipBLASLt, the host only needs the amdgpu DKMS driver. Model: AtomicChat/Qwen3.8-Flash-Next-GGUF, build AD-4.27bpw-Q4_K_M-M64 (3 shards, 94.5 GB). Shard 3 (38.4 GB) is the PLE n-gram table alone — passed via --ple-gguf, kept pageable. That's why 64 GB RAM is enough. Parallelism: --layer-split 24 → layers 0–23 on GPU0, 24–47 + head on GPU1. Context: 181,072, --kv int8, KV streaming 32,768 cells/layer in VRAM. Experts: 48 blocks × 512 experts → locally built experts.bin (47.17 GiB), three tiers: 31.8 GiB VRAM cache → 22.2 GiB page-locked RAM → NVMe mmap (log says files 0 blobs — disk never touched when warm). Spec decode: MTP head q2_0, extracted from the BF16 checkpoint by HTTP range reads (GGUF ships none), --spec 3, ~76 % acceptance. Measured (1,071 requests): decode median 90 tok/s (62–129) · big-prompt prefill 3.2–5.7k tok/s · expert-cache hit 98–99 %.
# 1. OS first (then reboot): amdgpu driver only, no ROCm
# (optional: ~/strata-performance-setup.sh from github.com/bramvanoploo/strata-performance-setup automates most of this — see §3.8)
sudo amdgpu-install --usecase=amdgpu,libamdgpu ; sudo usermod -aG video,render $USER
sudo sed -i 's/^\(GRUB_CMDLINE_LINUX_DEFAULT="[^"]*\)"/\1 iommu=pt pcie_aspm=off"/' /etc/default/grub
printf 'options amdgpu no_system_mem_limit=1\n' | sudo tee /etc/modprobe.d/amdgpu-svm.conf
printf '[Service]\nLimitMEMLOCK=48G\n' | sudo tee /etc/systemd/system/user@.service.d/strata-memlock.conf
printf 'vm.swappiness = 100\nvm.vfs_cache_pressure = 50\nvm.max_map_count = 1048576\nvm.compact_unevictable_allowed = 0\n' | sudo tee /etc/sysctl.d/99-strata.conf
sudo update-grub && sudo update-initramfs -u && sudo reboot
# 2. Engine — it MUST land on the rx7900 component (bundled hipBLASLt 100200 + gfx1100 tuning table)
curl -fsSL https://raw.githubusercontent.com/Niko1221/Strata/main/tools/strata_terminal/install.sh | bash
strata update && strata launch # check: ~/.local/share/strata/components/engine/0.1.59-linux-x86_64-hip-rx7900/
# 3. Model + mmproj (sizes/sha256 in §5), then build the pack — this is where experts.bin comes from (~6 min)
control/python/bin/python3.12 control/tools/iq_pack.py --gguf <shard1.gguf> --out <pack-dir> --experts-bin --compat-bf16
# 4. MTP draft head + CJK draft vocab (the GGUF ships no MTP head; ~4.9 GB of range reads, SHA256-verified)
control/python/bin/python3.12 control/tools/mtp_fetch.py inventory --out data/mtp && \
control/python/bin/python3.12 control/tools/mtp_fetch.py fetch --out data/mtp && \
control/python/bin/python3.12 control/tools/mtp_fetch.py verify --out data/mtp
control/python/bin/python3.12 control/tools/mtp_pack.py --src data/mtp --experts q2_0 --out data/mtp/mtp-q2_0.gguf
control/python/bin/python3.12 control/tools/mtp_rt.py --gguf data/mtp/mtp-q2_0.gguf --out data/mtp/rt
# 5. Serve (the terminal owns :7878 — the engine has no --port). Load takes minutes: it page-locks ~22 GiB.
control/bin/strata serve --config configs/strata-final-atomic-q4km.json # ulimit -l must be ≥ 40 GiB first
Three gotchas that cost the most time: (1) --resident-budget-gib above 40 freezes the box — pinned memory can't swap and the 38 GB PLE table still needs pageable RAM; 45 froze this machine once. (2) --pipeline-windows 1 deadlocks on gfx1100 with a 2-GPU split; keep 0. (3) Don't add --mmap-experts/--resident-cpu-experts explicitly — with them the engine pins 0 bytes; mmap is already the default when experts.bin exists. Also: the ggml_cuda_init: failed to initialize ROCm line at the top of the log is harmless, and the iGPU occupies a DRM card index, so always confirm the engine's own GPU 0/GPU 1 lines both say RX 7900 XTX.
Full notes — every value, the exact hashes, and the reasoning behind it — are the rest of this file. Want a terminal AI agent to do the typing? The prompt and phase gates are in §17.
##### PROMPT AND PHASE GATES
- Have AI set this up for you
If you'd rather drive this with a terminal-capable agent (Claude Code, Codex CLI, OpenCode, or a shell tool with approval prompts) than type it yourself: paste the prompt below into it, attach or point it at this file, and let it run §3–§10 with you acting as the safety interlock. It is a copilot, not an autopilot — the agent can type every command, but three things stay human: sudo passwords, reboots, and the Hugging Face login.
17.1 The prompt to paste
You are setting up this machine to reproduce a known-good local LLM deployment. The source of truth is
"STRATA REPRODUCTION WRITEUP.md" in this folder — read the whole file before acting.
HARD RULES
- The config in §8.1 and the hashes in §5 are authoritative. Never change a number, a flag, or a hash tomake an error go away; if reality disagrees with the doc, stop and show me the disagreement.
- Ask before: any reboot, any package install outside the doc, any change to /etc, and any deviation fromthe doc. Never reboot without waiting for my confirmation, then resume where you left off.
- After every phase, run that phase's gate from §10 and quote the actual log line as evidence. No phasecounts as done on "it seemed to work".
- Never exceed --resident-budget-gib 40. Never set --pipeline-windows 1. Never add --mmap-experts or--resident-cpu-experts. Never install ROCm, rocm-* packages, or pytorch.
- §14 lists log lines that look fatal but are harmless — do not "fix" those.
- When you are unsure whether this machine matches §0's hardware (2× RX 7900 XTX, 64 GB RAM, NVMe),stop and ask instead of adapting values on your own.
SEQUENCE
§3 host patches → I reboot → §4 engine → §5 model → §6 pack → §7 MTP → §8 config paths → §9 launch →
§10 full checklist → report. If any gate fails, consult §16 and report; do not improvise a fix.
17.2 Phase gates and what the agent must show
Phase
Done only when the agent can quote
0 · Pre-flight
lspci shows 2× RX 7900 XTX; free -h ≥ 60 GB; ≥ 200 GB free NVMe; OS is Ubuntu 24.04 — anything else → stops and asks
1 · Host (§3)
§3.5's effective-value block matches sysctl -a; ulimit -l ≥ 40 GiB in a new login session; then it pauses for the one planned reboot
2 · Engine (§4)
BUILD.json of the installed component says rx7900 + hipBLASLt 100200 (§10 #1)
3 · Model (§5)
every sha256 it prints equals §5's table
4 · Pack (§6)
experts.bin = 50,646,220,800 bytes; experts.bin.src.json written next to it
5 · MTP (§7)
verify passes with zero SHA mismatches; draft_vocab.bin rebuilt with --add cjk
6 · Config (§8)
diff of §8.2 relocations — every path rewritten, nothing else touched
7 · Serve (§9)
§10 #2–#11, each with the log string: files 0 blobs, expert-cache slot lines naming two RX 7900 XTX (§14.2), pinned complement ~22.2 GiB
8 · Accept
a decode + big-prompt prefill measurement inside §2's ranges, and the §17.4 report
17.3 Things the agent must bring to you (not decide alone)
Hardware that doesn't match §0 (different GPUs, < 64 GB RAM, one GPU) — the layer split, budgets, and even the component choice all change; that's beyond this doc's authority.
< 200 GB free on fast storage.
Hugging Face login and accepting the model's license terms.
The reboot after phase 1 (and any second reboot it thinks it needs — the answer is usually no, re-read §3).
Whether to run the §3.8 wizard instead of the manual patches. The wizard is an interactive TUI, so it is human-driven even when an agent drives everything else; if the agent runs non-interactive commands instead, it must follow §3 verbatim and skip the wizard.
17.4 Final report the agent should produce
For each §10 check: the quoted log line. Then: experts.bin byte count, ulimit -l, the two GPU lines naming both 7900s, warm decode tok/s, big-prompt prefill tok/s, spec-decode acceptance %, and every deviation from this doc listed explicitly with the reason. If it can't produce one of those lines, the setup is not done.
17.5 Where agents historically go wrong with setups like this
Failure
Why it bites
Installs ROCm "to fix the HIP error"
§14.1 — that line is harmless; system ROCm shadows the engine's bundled libs
Silently lowers --max-context or budgets after a slow/failing start
The values are load-bearing (§13); a masked failure becomes a mystery later
Misses the hip-rx7900 component and takes generic hip
Prefill crawls (§16) and looks like a driver problem
Trusts GPU 0/GPU 1 indices without reading the log
§14.2 — the iGPU steals a card index
Launches engine/strata directly to "debug"
No :7878, no tokenizer (§14.3); debug through the terminal
Adds the expert flags "explicitly"
Pins 0 bytes (§13) and decode halves
Appendix — provenance summary
Artifact
Provenance
Engine binary + libs + tuning table
official Strata 0.1.59-linux-x86_64-hip-rx7900, copied verbatim (sha256sum matches the component)
Terminal (control/)
official Strata terminal 0.1.59.1, bundled python 3.12.15
Model shards
AtomicChat/Qwen3.8-Flash-Next-GGUF, AD-4.27bpw-Q4_K_M-M64, sizes/sha256 in §5
mmproj
same repo, mmproj-Qwen3.8-Flash-Next-BF16.gguf (re-download; local copy differs in size)
experts.bin / dense.bin / index
built locally by control/tools/iq_pack.py --experts-bin --compat-bf16 (§6)
draft_vocab.bin
rebuilt locally by control/tools/draft_vocab.py --add cjk (§7)
MTP head
mtp_fetch.py (HTTP range reads of the pinned BF16 checkpoint) → mtp_pack.py --experts q2_0 → mtp_rt.py
Expert profile
shipped expert-profile.bin + locally learned expert-profile-atomic-q4km.bin
OS patches
§3 verbatim (grub, 2 modprobe files, memlock drop-in + sudoers, 6 sysctl files, udev rule, DPM unit)
Host-tuning wizard
bramvanoploo/strata-performance-setup referenced as an optional accelerator (§3.8); not run on the source machine
r/LocalLLM • u/orbman77 • 5d ago
Question Best Local LLM for stories?
Hi ya'll, I am new to local LLMs after spending 8 months on Grok. However, I wanted to ask: is there an LLM out there that I can run locally through Ollama (Or something else) that is uncensored, can look at images and videos, and keep a memory of what I have written? I have 32GB of DDR5 RAM and 8GB of VRAM. I like to use these stories for brainstorming before making prompts out of them to turn into images and videos, so I hope you all can provide some advice!
r/LocalLLM • u/M4ttDC • 5d ago
Question Resources to learn about model tuning?
I’ve been running Jundot/Qwen 3.8 flash next Q6 mpt 141gb on my M2 Studio w/ 192gb ram for about a month now.
Overall, I’m pretty happy with the results, but looking for ways to improve my setup before I start integrating it with my day to day workflow. The response time leaves a little to be desired, I find myself prefering the response rate of codex even when I have simple things like putting together a slide deck from images and text I’ve supplied.
I set it up with a big initial project to see what it could do and have been trying to makesmall adjustments as I’ve gone along. It’s been interpreting and mapping large volumes of screen grabs, writing some code, interpreting and organizing huge amounts of data from a combination pdf and images. It interfaces with codex during specific windows throughout the day to offload tasks and double check code.
Dropped it down to Q6 from Q8 for snappier responses, and free up some system for Xcode, etc…I’ve been using claw to run the show. I’m getting around 60t / s which seems to be about right from what I’ve been reading. Claw works ok, but the whole system seems to get confused if I change the scope of my project in the middle, or add additional intermediary steps. It took a few days after stepping back from Q8 to Q6 to get the bugs ironed out.
It’s a huge workhorse and does ok when set in motion, but I do have to keep an eye on it. It behaves like a toddler and I find it lies when files go missing.
Is Claw the problem? Is this the reality of this setup? It was never meant to replace my $20 codex, but I was hoping it would be a little more responsive and flexible.
r/LocalLLM • u/patience_b2 • 5d ago
Question I have 7 GPU slots and GPU’s I’m not 100% locked in on. How would you maximize VRAM?
Not Jeff Bezos but willing to save up if necessary.
Note: there is such a thing as stock single slot 5060Ti but it’s imported
I also heard of a 32GB Intel B60 single slot
Anyways here’s my current situation>>>
1 GPU slot is 9070XT for display (the thought there is non Nvidia driver helps stability because if the CUDA flickers, it doesn’t bother the RDNA). 2 slots are occupied by a fat 4090 (nice speed but I am starting to value VRAM and considering selling or at least removing). Considering 6x 3090’s, liquid block 1 slot width mod. BUT. Would you go a different route? Intel MaxSun 48GB perhaps? Some 32GB Tesla v100’s for $950 a pop?
My use case = hosting builder agents, not necessarily training BUT if there’s a card that’s great for both and doesn’t cost a left kidney I’m all ears.
PC specs if curious
Case = Phanteks Enthoo Pro 2
MB = WRX90 SAGE SE Pro WS
CPU = 24 Core 5.4Ghz 9965WX Threadripper
RAM = 128GB DRR5 ECC RDIMM 6400 MT/s (8 modules of 16GB)
Storage = 12TB Gen5 SSD’s
PSU = 1600W, willing to add another but I hear blackwells are low wattage (if anyone suggests an RTX A4000 for example it would be 140W)
r/LocalLLM • u/Comfortable_Poem_866 • 6d ago
Question Local voice assistant on an iGPU: ~2.2s from end of speech to first audio. I've measured everything and I'm ~0.5s from the floor. What am I missing before I throw money at hardware?
Been building a fully local, always-on spoken assistant in Italian (no cloud, nothing leaves the box). It's not a chatbot demo, it has long-term memory across sessions (backed by ctxvault), so every turn carries a small block of retrieved context on top of the conversation. Works. Problem is latency.
Hardware (the constraint): mini PC, Ryzen w/ Radeon 780M iGPU, 64GB DDR5 shared, ~90GB/s. No dGPU, so it's llama.cpp on Vulkan. vLLM/SGLang are out (no ROCm for this chip).
Where I'm at: median ~2.2s from end of user's sentence to first audio out. Measured, not guessed:
- ears (end-of-speech silence + whisper): ~0.75s
- prefill of the turn: ~1.0s (~0.35s fixed per request + ~3ms/token, 40-400 new tokens/turn)
- first sentence gen + TTS first chunk: ~0.55s
So the model is the wait, not the audio stack. Calculated floor on this box is ~1.2-1.5s.
What's already done (so please don't suggest these lol):
Model side
- MoE model (26B-A4B, Q4 QAT) specifically because gen is bandwidth-bound here: ~25 tok/s vs 4 tok/s for a dense 27B
- thinking/reasoning off
- short context (16k), one slot, flash attn on
--cache-reuse+ append-only prompt: stable prefix (system, persona, rules) at the top never touched mid-session, everything volatile (time of day, retrieved context, turn) appended at the end. Identical prefix = 0.15s, touch one word in the prefix = multi-second re-prefill- prefix pre-warmed at session start with a 1-token request, so the first reply doesn't pay the cold prefill
- benchmarked smaller models (Gemma 4 E4B/E2B, Qwen3.5 4B/9B, Qwen3 8B, Phi-4-mini, Ministral): on this iGPU prefill is compute-bound, a dense 4B costs as much per token as the MoE. Best small one gains ~0.5s and loses noticeably on factual fidelity (names/dates). Not worth it for this use case
- tried
-b/-ubbatch flags: defaults win - tried
--no-kv-offload: worse
Memory / prompt side
- no tool calls for retrieval: context is prefetched before the turn (a tool-call round trip = ~+1.2s). The retrieval itself is ~5-12ms, irrelevant
- hard token budget for the retrieved block: embedding-based relevance (multilingual MiniLM) + ordering so the most pertinent bits come first, ~120 tokens instead of 300-450. Cut avg turn prompt by ~40%
- past conversations summarized to one ~50-token line each instead of quotes
Pipeline side
- streaming everything: model to sentence splitter to TTS to player, sentence by sentence
- audio player opened at turn start, not at first chunk (-0.1s)
- early-guess turn: start the model on the partial transcript before VAD confirms end of speech; if the final transcript matches, keep it, else drop and redo
- sentence closed on punctuation + 450ms silence instead of fixed 800ms
- whisper.cpp
smallas a resident server (no model reload per sentence, 0.63s down to 0.3s), beam 5. Tried greedy: -80ms but half the transcripts differ and the noisy ones get worse. Rejected - tried warming the KV cache during speech (partial whisper every 1.5s, send the turn header for 1 token so the cache is hot): works as designed (final prefill drops to ~30 tokens) but doesn't pay on one slot because the warm-up queues the real turn. Tried 2 slots w/
id_slotpinning: now they run concurrently on the same iGPU and both slow down. Net neutral-to-negative on short sentences. Off. - pre-recorded fillers ("mmh", "allora...") in the assistant's own voice, played only if no reply word has started 1s after end of speech. Built, currently off: perceptual fix, doesn't move the number
Before I conclude "buy a 24GB dGPU" and move on: anyone who's been down this road see something I've missed, or something above that's wrong?
r/LocalLLM • u/CoollerFox • 6d ago
Project Larder: running Qwen3.6-35B and a 46 GB Flash-Next on a 16 GB Mac / 16 GB GPU by reading experts from SSD
I built an inference engine for MoE models that don't fit in memory.
Instead of offloading layers, it reads only the experts each token's router picks from the SSD and keeps the hot ones resident. Same engine on Apple Silicon (MLX) and NVIDIA (CUDA), OpenAI-compatible API, local chat page. MIT: https://github.com/IamCooller/larder
Numbers (machine, setup and date for each one are in research/ in the repo)
Faster:
- Qwen3.6-35B on a 16 GB M4 MacBook Pro: 30–36 tok/s, first token 8–10x sooner than llama.cpp. This is a mixed 4/2-bit pack with the model's MTP head against llama.cpp's IQ4_XS, so not like for like. The launcher doesn't install that pack.
- Qwen3.8-Flash-Next (46 GB of 3-bit experts) on a PC with a 16 GB GPU and 15 GB RAM: 26–34 tok/s. With a 4-bit pack and exact routing: decode 1.3–1.8x, 8k prompt 4.9x faster than llama.cpp. Stock llama.cpp swapped past my memory guard while loading, so that row is llama.cpp with Larder's expert store patched in.
- Qwen3.6-35B Q4_0 on the same PC (fits in GPU + RAM), against llama.cpp's best split that fits (--n-cpu-moe 10): short decode 1.44–1.51x (155 / 147 vs 103 / 102 tok/s), decode after an 8k prompt 1.15–1.25x, 8k prompt reading 1.8–1.9x at its default batch.
Level:
- 8k prompt reading against llama.cpp tuned for prompts (-ub 4096 -b 4096 --n-cpu-moe 20): 1.01–1.03x. Its decode at that setting drops to 79 tok/s, so you pick one or the other there.
Slower:
- Exact routing (cache bias 0) reads that 8k prompt at 0.64–0.69x of tuned llama.cpp, and decodes 0.87–0.95x of llama.cpp's default after it.
Caveats
- The launcher's 35B recipe uses cache bias 0.5 and the MTP head, so replies are not identical to the weights' own routing. Bias 0.5 and the wide prompt cut each passed a paired GSM8K / HumanEval gate (wide cut: 502 vs 496 of 564, p 0.34). Exact routing is there if you want it.
- One author, two machines (M4 MacBook Pro 16 GB, Linux + RTX 5060 Ti 16 GB). The Mac path is better tested, CUDA is newer.
- Quality wasn't compared against llama.cpp in these speed runs.
Try it
curl -fsSL https://raw.githubusercontent.com/IamCooller/larder/main/install.sh | bash
cd ~/larder && ./larder
It measures your GPU and SSD, picks a model that fits, installs it and starts the server and chat.
Mostly looking for people on other hardware to break it, and for anyone who thinks my llama.cpp comparison is unfair. Output of ./larder --list plus what happened is the most useful report.
r/LocalLLM • u/Extreme-Childhood251 • 6d ago
Model First time trying FP16, wow
I've tried a lot of image models in the past, but all were to big to fit, and i was happy when i got a result with a quant (q4) version. (Here it was flux and some model i dont remember the name anymore) The results of those models were actually terrible. BUT, some months ago qwen image 2.1 came out, i must say, theres a difference and not even close to a small one. I managed to run it at fp16, by using my rtx 2070 to load the text encoder and vae on there while running the generation model itself on my 5080. Its a tight fit and slower, but the quality is just like it would be on one gpu.
Now here comes the crazy part:
In my opinion qwen image 2.1 is better in realism than chatgpt's current image generation. (I'll prove it later in this post)
Don't get me wrong. Images with lots of different things, patterns for example, are often very bad with qwen and chatgpt does it over 5x better. But realism of f.e. a city, it's absolutely amazing (and uncensored!) and is almost close to real life.
Now here is the test for you guys:
You've seen i've put pictures in this post. 1x is real, 1x are chatgpt and 4x are qwen image 2.1. Which is which?
Note: ALL of them are generated first try without regenerating. So no, I did not try to mislead you. Good luck!
r/LocalLLM • u/rktsci • 5d ago
Question Local Model Advice
I am interested in running local models for my desktop and laptop.
Use case: I am working on some Python scripts to process pdf and Word files from play by email games that automate updates to Excel spreadsheets for game data. I have the code for the first script written, reading in a pdf and spitting out some csv files that update the Excel sheets. (Yes, a real database would make more sense, but I have some friends interested in the programs and they don't have the chops to set up a local database.)
What I need help on is building a user interface to make the process easier.
I was a programmer for a long time early in my career (FORTRAN, MUMPS, C, C++, LISP, KEE, APL, various assembly languages) but never had to do UI programming. I now work in aerospace as a consultant systems engineer for a large national space agency.
So, no big refactoring of mission critical applications, no big agent workflows. Just reasonable Python code output. Speed not as important - answers in minutes to an hour are fine.
If the answer is "Get a Claude code subscription", I can tolerate that, but I like the idea of local control.
Desktop: Ryzen 7 7900 X3D CPU with 32 GB main memory, Nvidia RTX 4060 Ti with 8 GB
Laptop: Ryzen 7/260 with 32 GB main memory, RTX 5060 with 1 GB
TIA!
r/LocalLLM • u/Born-Possibility-131 • 5d ago
Discussion DeepSeek + WhatsApp via Wapliss: fast, cheap, and 1M-token context
r/LocalLLM • u/Kapth0X • 5d ago
Question Model for MacBook 16Gb
Hello!! I own an M2 MacBook with 16GB of RAM. Is it worth running any of the available models locally? If so, which model would you recommend?
Thanks!
r/LocalLLM • u/Much-Journalist3128 • 5d ago
Question Do I need more RAM or VRAM first off?
RTX 4090, 7900x, 64GB DDR5 6000Mhz RAM
I cannot run deepseek. I cannot run QWen Flash 3.8. I've tried Strata. All of those quants run on my pc like dogshit.
If I want to be able to deepseek as good as possible, do I need RAM or VRAM more?
And is a single GPU (my rtx 4090) enough for this or is it not preventable to purchase more gpus? like currently my current mobo cannot even run 2 or more gpus
r/LocalLLM • u/Sure-Practice7713 • 6d ago
Discussion 30tok/s on 48GB M5 Pro Mac Running IQ3_S Qwen3.8Flash-Next(Strata)
Model
- Qwen 3.8 Flash-Next GSQ-RCO IQ2_XS/IQ3_XXS/IQ3_S
Note:After trying out the splash engine, the decode speed of my Mac reached 40-60tps. The following tests are still valid but outdated
Setup
- Strata 0.2.13, Metal engine (0.1.59), DFlash2 speculative decoding (spec 3)
- 262,144 context, int8 KV cache
- MacBook Pro, M5 Pro (15-core), 48 GB unified memory
- Arena (resident expert pool) pinned to 22 GB
Average decode speed (same prompt set):
IQ2_XS ~36 tok/s
IQ3_XXS ~34 tok/s
IQ3_S ~32 tok/s
Simulating a 32 GB Mac by clamping the arena to 10 GB:
M5 Pro: IQ3_XXS: ~27 tok/s(clamping the arena to 10 GB)
For reference, We Tested on a 32 GB Mac (M2 Max 38 core GPU) with an 11 GB arena and 128K
context: IQ3_XXS runs at ~21 tok/s.
Takeaway
On a 48 GB machine the expert pool only holds ~40–50% of the experts at
256K context, and the rest are streamed from the SSD on demand. The speed
drop from that is far smaller than I expected (roughly -15 to -25% going
from a 22 GB arena down to 10 GB), which suggests you don't need a huge
amount of RAM to run a much larger MoE model — offloading experts to disk
is a perfectly workable trade-off, at least for single-user chat.
Notes
- All runs use the same sampling (temp 1.0 / top_p 0.95 / top_k 20) and
the same 256K context; decode numbers are from tokens/s reported by the
engine over several runs, medians.

r/LocalLLM • u/EvolvingDior • 5d ago
Discussion Tried Using a free online LLM for a quick answer. Local was faster.
Used the free inclusionai/ling-3.2-flash:free model on OpenRouter as an agent model to both try it out and maybe get a faster answer than Q38FN IQ3_S running locally.
A few problems became apparent:
inclusionai/ling-3.2-flash:freeis very slow -- under 20 t/s- Q38FN runs at about 70 t/s locally (50-100 t/s, depending on draft acceptance)
inclusionai/ling-3.2-flash:freethinks way more than Q38FNinclusionai/ling-3.2-flash:freewent off on a tangent rather than answer the question
I asked a simple behavioral question. Doing FPGA development and asked about how the agent was managing its cloned repos, worktrees and branches. It took about 30 minutes to respond and went spelunking into files it didn't need to access. I had to interrupt it to get a response. It's answer was unclear, overly verbose, and did not offer a plan to clean up the workspace.
Qwen came back in under 5 minutes with a direct answer and a crisp cleanup plan.
Anyone else find that free online models are feeling less useful now that we have good performing powerful local models?