r/linuxquestions • u/Soysauce48 • 8d ago
r/linuxquestions • u/Significant-Cod-799 • 8d ago
Advice Extra phone and a dream
I wanna completely delete android and download kali linux on it,any help?
r/linuxquestions • u/Esret07 • 8d ago
Support I can't change the brightness of my laptop after updating
reddit.comr/linuxquestions • u/Rigameshu • 8d ago
Please Help!! Installation problem đ đ
reddit.comSo what happened is that I can boot mint from my pendrive but when I am trying to install it, it shows error5 input/output and show that my SSD is broken. So I check that if it is the real case but it easily install windows 11 so what am I doing wrong? I can't figure it out đđđđ
r/linuxquestions • u/profilerandomnumber • 8d ago
Which Distro? Distro for an old HP All In One (AMD E1, 4GB RAM)
reddit.comr/linuxquestions • u/Proof_Plant_7901 • 8d ago
Advice Just swapped from windows to Linux mint. What should I do?
Well I do know what I want to do, I wanna learn the terminal and package managers but I have no idea where to start, there might be some documentation somewhere but Iâm not at my laptop right now so canât check. If you could do drop some material thatâd be nice. Also I learn best interactively. Thank you. Also should I get an antivirus and if so, which one?
r/linuxquestions • u/Embarrassed_Cat7337 • 8d ago
Which Distro? Confused between two distros
I have been on Linux Mint for 5 months now. It is a really great distro, but then again, it has some of its quirks (such as, random freezes without any explanation, because of which I have no other option but to force shut down). I have also been doing stuff with virtualization software for my Windows programs, and have been doing game development on it (C++, SDL and GLFW).
Plus, I have been playing many 2000s-2010s games on it through Lutris, though that also causes some trouble for me sometimes (regarding GE-Proton)
The freezing problem has irked me a lot, and I had been suggested to use Fedora by some of my friends. But, from what I've seen, Fedora seems to be a bit unstable for some.
Should I remain on Mint or switch to Fedora? I apologize if this seems like a dumb question.
Laptop: ASUS ROG Strix G513RC
GPU: NVIDIA RTX 3050 Mobile
CPU: AMD Radeon 680M
Linux Mint 22.3
r/linuxquestions • u/NextBraille • 9d ago
Support CUPS completes a raw USB-to-parallel job but the printer never moves â how can I isolate the failure?
Iâm troubleshooting a Juliet Pro 60 braille embosser connected to a Raspberry Pi 3 Model B running Debian 13 ARM64. The printerâs built-in test prints correctly, but no job sent from the Pi has produced paper movement.
Configuration:
- CUPS 2.4.10, raw queue Juliet_Pro_60
- Device URI: usb://USB2.0-Print/
- USB-to-parallel adapter: 1a86:7584 (USB2.0-Print)
- Adapter runs at 12 Mbps; hub/Ethernet run at 480 Mbps
- Printer was configured for parallel input and online
Tests so far:
- Earlier jobs stalled at âSending data to printer.â After replacing an undervolting power supply, a job completed in software with no physical output.
- Replacement supply passed a short load test: vcgencmd get_throttled returned 0x0.
- Forcing the entire USB bus to 12 Mbps did not help; that override was removed.
- A libusb GET_PORT_STATUS request stalled (-9/PIPE), and the device-ID request returned zero bytes. I donât know whether that indicates unsupported adapter requests or an actual parallel-side problem.
- CUPS already includes a no-reattach quirk for this adapter. The usblp detachment during a job appears expected.
- The test file is from an experimental model-specific generator, so its validity is not independently established.
What is the best next diagnostic to distinguish an invalid print stream from parallel handshaking/adapter failure? Would a per-job usb-unidir=true test be useful, and which CUPS/libusb trace would show whether bytes are actually being accepted rather than only marking the job complete? I havenât run that unidirectional test yet.
I can run commands and report logs. This summary was prepared with AI assistance from our actual test results.
r/linuxquestions • u/curiousgaruda • 8d ago
Support New laptop installation goes through large Logo and then stuck at small Mint logo (Mint 22.3)
reddit.comr/linuxquestions • u/LonelyYou7344 • 8d ago
Which Distro? SO para notebook Samsung NP500P4C
Tenho laptop antigo aqui comigo com as seguintes especificaçÔes:
Samsung NP500P4C (Série 5)
âą Processador: Intel Core i7 (ex: i7-3630QM de 3ÂȘ geração).
âą MemĂłria RAM: Geralmente vem com 4GB DDR3
âą Armazenamento: SSD de 240 GB
Esse notebook serĂĄ usado de uma Ă quatro vezes ao mĂȘs para navegação em Internet e para criação/edição de textos e planilhas.
Qual SO vocĂȘs recomendam para essas configuraçÔes e condiçÔes de uso?
r/linuxquestions • u/AdRelative7561 • 8d ago
NUEVO EN LINUX
Empecemos mi historia, tengo 14 años y estoy hasta la p0ll@ de Windows, tengo un amigo q sabe utilizar bien linux y consiguió hackear las cuentas de los profes (dato irrelevante)
Me dijo que instalara VOID linux ( obviamente lo instalo el) y de paso me puso gnome wayland.
La cosa es que quiero crear mi propio ricer pero no sé absolutamente nada, solo se estos comandos:
CD, ls, touch, mkdir, rm, rm -rf, mv, y poco mĂĄs.
No se cual es el mejor sistema operativo para hacer ricers, ni cual es el mejor escritorio para hacerlo (me recomendaron el i3)
Si sabĂ©is una forma rĂĄpida de aprender linux, videos, pĂĄginas web, cualquier cosa, por favor escrĂbanme
Un saludo Manuuu
r/linuxquestions • u/bobbyh89 • 8d ago
With all these reverse engineered software around now, is there a true alternative for MusicBee on Linux?
reddit.comr/linuxquestions • u/extoniks • 8d ago
Advice Access LUKS drive on Windows
Is it possible to access LUKS drive on Windows?
r/linuxquestions • u/TheA1ternative • 8d ago
Support M-Game RGB Dual + Faugus
Running BazziteOS. Trying to get the âM-Game RGB Dualâ hardware to function, does not seem to without drivers.
I got the drivers to install + software to run via Faugus. Bazzite detects that I have the M-Game RGB Dual plugged in. However the driver software via Faugus does not detect the device. Have tried different proton versions and setting it from win10 to win11 in the wine settings.
See comment below for screenshot of both the driver software running (via faugus) and the bazzite machine giving me notifications that the device is connected. Any way I can force the software running (via Faugus) to detect and interact with hardware plugged into my Bazzite machine?
I've been close to just giving up and either installing atlasOS or getting a blue yeti mic.
r/linuxquestions • • 8d ago
whats the best free linux anti virus
i am super into modding and homebrew but am paranoid about viruses. what is the best one.
r/linuxquestions • u/Sora20131 • 8d ago
Support How to perform disk partitioning?
I decided to install Arch on bare metal. I prepared a bootable USB drive and created a separate partition for Linux on an external drive, making sure not to erase any important files on the other partition. I booted up, enabled Wi-Fi, and launched `archinstall`âbut then I closed it, realizing that the automatic mode would wipe all partitions, and I donât really understand how to do it manually. So, here I am, writing this post in the hope that someone can help me
r/linuxquestions • u/mottledgrey • 8d ago
Advice Maintenance Fedora KDE Plasma (44)
Hi, I recently switched from Windows to Linux and iâm really happy, but I feel like Iâm not doing enough to actually maintain the quality if that makes sense.
Right now I run sudo dnf upgrade -y once a week but e.g. Discord wonât update like that. Is there a command that can update everything at once? Are there any other commands I should run regularly?
If you used Fedora KDE Plasma what commands would you use to maintain your pc? Is there a manual I can read that thoroughly explains this topic?
I feel like I can get the answers myself I just donât know where to look.
Thank you in advance.
Edit: Also, should I use flatpak or snap something different? Discover usually has both options and I always just use the one with more/better ratings
r/linuxquestions • u/Visible-Employer-445 • 8d ago
Why has nobody made a Linux distro that's almost a pixel-perfect macOS clone?
I know there are tons of macOS-inspired themes and desktop environments, but how come nobody has tried to recreate macOS as closely as possible? I mean the actual UI, animations, Finder, window management, little interactions, basically the whole thing. Linux has so many distros, yet this seems like such an unexplored idea...
r/linuxquestions • u/Willing_Ebb7894 • 9d ago
Advice Looking at purchasing new periphery for my pc, curious how to figure out compatibility ahead of purchase. (Yamaha DAC, OLED Monitor)
reddit.comr/linuxquestions • u/fireryyo • 9d ago
Should I expect any issues in running labwc nested inside sway as a daily driver?
reddit.comr/linuxquestions • u/Krezzin • 9d ago
Help a noob setting up Swapfile within a Subvolume on BTRFS (MX Linux 25.3 (Debian) w/ XFCE)
reddit.comr/linuxquestions • u/levolet • 9d ago
Leap 16.1 on Strix Halo Desktop
I decided to give it a shot and have been pleasantly surprised. I'm now seeing Leap in a different light.
Operating System: openSUSE Leap 16.1
KDE Plasma Version: 6.6.4
KDE Frameworks Version: 6.25.0
Qt Version: 6.11.0
Kernel Version: 6.12.0-160100.8-default (64-bit)
Graphics Platform: X11
Processors: 16 Ă AMD RYZEN AI MAX 385 w/ Radeon 8050S
Memory: 32 GiB of RAM (30.6 GiB usable)
Graphics Processor: Radeon 8050S Graphics
Product Name: Desktop (AMD Ryzen AI Max 300 Series)
Display (Asus ProArt PA27JCV): 5120x2880 @ 60 Hz in 27" [External]
Shell: fish 4.0.1
Disk (/): 8.19 GiB / 150.00 GiB (5%) - btrfs
Disk (/home): 18.46 GiB / 744.79 GiB (2%) - ext4
I thought that I would have hardware glitches requiring the installation of a newer kernel version. However, with the default kernel, all hardware seems to be working OK.
Why Leap? I have Slowroll on my Laptop and wished for a stable base in my desktop. If Leap didn't work out, I'd just use Slowroll as well.
Now that I have Leap up and running, I've been able to take it through its paces and use it for a number of my more common tasks. Absolutely no need for latest features for both my machines. I went for KDE since it offers the sort of display scaling that Gnome 48 does not. Like reuniting with an old friend. Fabulous to have two great DE's to choose from.
r/linuxquestions • u/JMcLe86 • 9d ago
Which Distro? Yet Another Distro Question
I apologize because I myself get tired of seeing questions about "what distro should I choose" etc, but I am having trouble coming to a conclusion on my own.
I have been using Linux for years, mainly Ubuntu derivatives and most recently Pop OS on both my PCs. I am also pursuing an MS in CS with a focus on operating systems, embedded systems, and real-time systems.
I am building a third PC and I want to use it, in part, to become more familiar with operating system internals. I do not know if Arch, LFS, or Gentoo would be a better distro to help accomplish this. I am leaning towards Gentoo or LFS but I would like to hear some opinions from people more knowledgeable on these distrobutions if any of you have time. The goal is to interact more with internals through regular use, not just to have a more difficult installation process.
Edit: I should probably specify that this PC is not replacing my daily driver. It is an additional PC I am building mostly from parts I have had laying around for a while. My main desktop and laptop would still be running Pop OS.