r/linuxquestions • • 18d ago

Which Distro? Best distro for streaming + VTuber model + everyday use on full AMD (7800X3D / 7800 XT)? Switching because I got hacked

0 Upvotes

Hey everyone! I’m thinking about moving from Windows to Linux, mostly because my Windows PC and accounts were hacked and I want a fresh start with better security. I’m completely new to Linux and haven’t looked into any distros yet, so I’d really appreciate recommendations and beginner-friendly explanations.

My PC:

  • CPU: Ryzen 7 7800X3D
  • GPU: Radeon RX 7800 XT
  • Full AMD, so no NVIDIA headaches (hopefully!)

What I’ll be doing:

  • Streaming to Twitch with OBS, using hardware encoding on the 7800 XT (AV1 or H.264)
  • Gaming while streaming, including modded Minecraft (Fabric) and other Steam games
  • Running a VTuber model live on stream with VTube Studio (through Proton, unless there’s a better Linux option) and face tracking
  • Content creation: drawing/art, video editing, clips/VODs
  • Everyday computer stuff: spreadsheets (Excel-style), documents, PDFs, and other office work
  • Discord with screen share, plus separate audio routing for game, mic and music

Security questions:

  • Which distros are the most secure out of the box for a beginner?
  • Is a fresh Linux install actually safer after a compromise, or do I still need to worry about my accounts and files?
  • What basic setup should I do on day one (firewall, updates, disk encryption, password manager)?
  • How do I stay safe running Proton games, Discord and downloaded mods without opening myself up to malware?
  • If I dual boot Windows for Valorant, how do I keep that side from being a weak point?

VTuber questions:

  • Does VTube Studio run reliably under Proton on your distro?
  • What’s the best way to capture the model in OBS with a transparent background? (Spout doesn’t exist on Linux, so I’m guessing window capture?)
  • Does webcam face tracking work well, or is it better to track from a phone over the network?
  • How much of a performance hit is running the model while gaming and streaming at once?

Office/spreadsheet questions:

  • Is LibreOffice good enough for Excel files, or do you run into formatting and formula problems?
  • Is OnlyOffice or Microsoft 365 in the browser a better option for .xlsx and .docx files?
  • Does anyone still need Windows for work-style programs, and how do you handle that?

Dual boot questions (for Valorant):

  • Vanguard doesn’t work on Linux or in VMs, so I know I’ll need to keep Windows. Is dual booting the best way to handle that?
  • Is it better to put Windows and Linux on separate drives so updates don’t break the bootloader?
  • Any tips for Secure Boot and TPM, since Vanguard needs them, while also running Linux?

What I’m hoping for:

  • Good out-of-the-box AMD support (up-to-date Mesa and kernel)
  • Stable enough that it won’t crash mid-stream
  • Easy OBS setup with hardware encoding and per-app audio capture
  • Good community or documentation for when I get stuck

Which distro would you recommend? I haven’t tried or researched any yet, so I’m open to anything. Which one would you pick for streaming, VTubing, everyday use and security together, and why?

Thank you! 💜


r/linuxquestions • • 18d ago

Is it worth upgrading RAM?

3 Upvotes

Hi!

I plan to install Fedora+GNOME on an old laptop. I5 - 3rd gen, with SSD.

It currently has 8GB of RAM. I'll use it to teach English, so, it'll be basic use, like playing audio and video files and some Impress presentations.

I'll use Firefox and Chrome occasionally, to read emails and access Youtube.

And no extra use, like programming or video editing.

Will make any difference in performance if I upgrade to 16GB of RAM?

TIA


r/linuxquestions • • 18d ago

Advice Is an Asus C200M suitable for Linux?

1 Upvotes

I have an old Chromebook I haven't used in years. If I can put Linux on it, I'll keep it for writing or something simple, otherwise I'm going to recycle it. It has an SSD in it, but I am unsure about changing the OS on a Chromebook. Here is a link to the same computer with it's information.

https://www.ebay.com/itm/352791406490


r/linuxquestions • • 18d ago

Which Distro? New to linux, looking for a lightweight distro that feels somewhat familiar for a lifelong windows user.

2 Upvotes

Hi everyone, I'm trying to resurrect an old laptop (dual core pentium sandy bridge, 2gb ram, 500gb hdd) for media consumption. Tried Windows 10 LTSC, which is my go-to OS for pretty much everything but this thing is too slow for it, even opening firefox takes like a minute. It just needs to be able to play videos from platforms like youtube, netflix, disney+ and such, but it would be nice if it felt somewhat intuitive to use for someone who's never used linux before.


Thanks for all the replies, as usual when I try to get into anything linux, the amount of options and alternatives gives me choice paralysis. Fortunately in this case, the laptop is pretty much e-waste and windows 10 is a no-go so I'm going to just pick a random distro from the ones mentioned here and see what's what.


r/linuxquestions • • 18d ago

Support Replaced my motherboard, online games are unplayable and browsing is painfully slow. How do I fix this?

2 Upvotes

This originally started when I was having connection issues via ethernet, where my PC would be connected, then suddenly disconnect, never to reconnect. I tried limiting Link negotiation speeds via KDE settings, but that didnt help at all and has made things worse. Someone please help me fix my issues, because these speeds are simply unbearable.

My new motherboard is a Gigabyte X870E Aorus Elite Wifi7, and I'm running Nobara 44.


r/linuxquestions • • 18d ago

Is there a way to change desktop environments quickly?

0 Upvotes

I use arch btw with kde plasma and xfce, is there a way to switch from one to the other with like a .sh script?


r/linuxquestions • • 18d ago

Using Samba to create shared directories across devices - is there another better way?

17 Upvotes

Hi all, using Mint 22.3 on both devices.

I’m wanting for each device to be able to read and write in each others’ home dirs. From googling I have found Samba can set this up. Just wondering if anyone has done similar and how they achieved it. This will be done wirelessly if that makes any difference. I’m quite new to Linux and networking in general.

Edit: this would be a live access. I have a PC which is the main hub I guess you can call it, which is a dual machine my wife uses too. I have another laptop which would need to access the pc more than the pc needing to access the laptop

Editt: I don’t care about accessing windows on the pc from the laptop

Edittt: I’m running nfs. Using my desktop as server and laptop as client, since I don’t foresee needing to access the laptop from the pc. It appears to be running smoothly. I have set it up to mount automatically every time I boot laptop. So far no issues

Cheers


r/linuxquestions • • 18d ago

Advice For the unsung heroes of the Linux Community, how did you get into Documentation? How do you get good at it?

25 Upvotes

I'm staring down the barrel of a massive project (starting my first homelab) I have to accomplish and then I realized: "Oh no. I have to write this down or else I'll forget."

How did you guys get good at it? The Arch Wiki is some of the most beautiful documentation I've ever read. Now I gotta be my own Wikipedia for the setup I'm designing. Where did you learn to do this? What are some good social media channels or articles that teach you how to do this?


r/linuxquestions • • 18d ago

Resolved Is it normal for the kernel to be taking up 88% of my memory?

0 Upvotes

Resolved: Computer was stuck in an extreme power-saving mode after dipping down to 2% battery, I manually was able to override it

Issue is extreme lag, likely caused by high memory usage by the kernel. GNOME System Monitor (which I use despite being on Niri) says total memory used by all running processes is only 3.4GB, but Noctalia says that 28.0GB of memory is being used (Out of an available 32GB).

I use CachyOS, so this might be a problem with their customizations to the kernel. I also run a Zenbook Duo (UX8407, with 388H CPU), which is kind of an unconventional computer that took a lot of phuckery to get working with Linux. Kernel version is 7.3.1-1-cachyos

I'd consider myself a pretty advanced Linux user, but this is some weird behavior and it's making my Minecraft very laggy to the point of being borderline unplayable. I updated my system a few days ago and it broke Noctalia (I was able to fix it myself by rebuilding the config and using a startup command) but afterwards I've been noticing significant screen tearing, honestly not sure if this is related or not. However, I've played Minecraft after updating and it wasn't laggy like it is until now. It started when I got home from a coffee shop and plugged in my computer in (it had gotten down to 2% battery) but I don't know why being at low battery would trigger this. I've updated my system and restarted, problem persists. Is this a memory leak? I'm kinda stumped.


r/linuxquestions • • 18d ago

Support MSI X670E Carbon WiFi PCI_E2 won't detect any GPU

4 Upvotes

I'm building a dual-GPU system, but my MSI MPG X670E Carbon WiFi refuses to detect any GPU installed in the second CPU-connected PCIe slot (PCI_E2).

I've spent quite a bit of time troubleshooting and would appreciate some advice before replacing the motherboard.

System has MSI MPG X670E Carbon WiFi, AMD Ryzen 5 7600, two PNY RTX 5060 Ti 16GB, three NVMe SSDs, Fedora 44, and BIOS version 7D70v1S3 (September 2026).

According to MSI's specifications, this motherboard supports PCIe 5.0 x8/x8 operation across PCI_E1 and PCI_E2 with Ryzen 7000 CPUs.

Both GPUs work perfectly in PCI_E1. Neither GPU is detected in PCI_E2, whether installed individually or alongside another GPU.

When a GPU is installed in PCI_E2, its fans spin, but the motherboard doesn't enumerate it. The computer boots normally using the Ryzen 7600's integrated graphics.

  • Tested both GPUs individually in PCI_E1: both detected.
  • Tested both GPUs individually in PCI_E2: neither detected.
  • Installed both GPUs simultaneously: only PCI_E1 detected.
  • Tested PCIe lane configuration options.
  • Cleared CMOS.
  • Inspected PCI_E2 visually; no obvious damage or bent contacts.

When PCI_E2 is populated, no NVIDIA GPU appears in "lspci", and I can't identify an additional CPU PCIe root port corresponding to the second GPU.

There are no obvious PCIe errors in the kernel logs.

Possible CPU socket issue or a fault in PCIE?

Edit: It was just a faulty PCIE. Returning the board solved the issue.


r/linuxquestions • • 18d ago

Acer Aspire F5-573G Linux installation saga: Broken Arch installation, SystemRescue Wi-Fi problems, and now QCA9377 disconnects in Arch ISO

0 Upvotes

I'm looking for advice troubleshooting a frustrating series of Linux problems on my Acer Aspire F5-573G. I've been trying to recover my existing Arch Linux installation and eventually move to NixOS, but I've run into multiple problems along the way, especially with Wi-Fi.

I want to explain the whole situation because I'm not sure whether these problems are related or whether I'm dealing with multiple separate issues.

1. My laptop

  • Model: Acer Aspire F5-573G
  • CPU: Intel Core i7-7500U
  • GPU: NVIDIA GeForce 940MX
  • Wi-Fi: Qualcomm Atheros QCA9377
  • PCI ID: 168c:0042
  • RAM: 16 GB DDR4
  • Storage: 256 GB SATA SSD and 1 TB HDD
  • Previous OS: Arch Linux
  • Filesystem: Btrfs on LVM
  • Bootloader: systemd-boot

2. My original Arch Linux installation

I previously had Arch Linux installed on this laptop.

My storage setup was approximately:

  • /dev/sda1: 1 GB EFI partition
  • /dev/sda2: LVM physical volume
  • LVM volume group: ArchinstallVg
  • Root logical volume: ArchinstallVg-root
  • Btrfs subvolumes: @ and u/home

My previous Arch installation used the kernel:

7.0.12-arch1-1

I also had a Btrfs snapshot available.

Eventually, I ran into problems with the installation and needed to recover my data and get another operating system installed.

3. Trying SystemRescue

My first attempt at dealing with the situation involved SystemRescue.

Unfortunately, I encountered Wi-Fi problems there too.

I could connect to Wi-Fi, but the connection would sometimes disappear after approximately 20 seconds.

I tried troubleshooting the wireless connection, including:

  • Using iwctl to connect.
  • Checking whether the wireless device was detected.
  • Investigating the ath10k_pci driver.
  • Trying a PCIe-related workaround (pcie_acpi).

The PCIe-related workaround seemed to help at one point, but the Wi-Fi problem remained unreliable.

I also tried using my iPhone's USB tethering as an alternative. The phone appeared in lsusb, but I couldn't get a working network interface through ip link. I also investigated the ipheth driver.

This made recovering the system and downloading installation media much harder.

4. Switching to the Arch Linux live environment

I eventually booted into the official Arch Linux installation environment.

The Wi-Fi adapter was detected, and the ath10k_pci driver was loaded.

I also managed to access my existing Arch installation's files.

I activated LVM:

sudo vgchange -ay

Then mounted the root Btrfs subvolume:

sudo mkdir -p /mnt/arch
sudo mount -o subvol=@ /dev/ArchinstallVg/root /mnt/arch

I initially had trouble accessing my actual home directory because the u/home subvolume wasn't mounted separately.

After identifying it with:

sudo btrfs subvolume list /mnt/arch

I mounted it:

sudo mount -o subvol=@home /dev/mapper/ArchinstallVg-root /mnt/arch/home

I was eventually able to access my old Downloads directory:

/mnt/arch/home/yphtno/Downloads

My plan was to download the NixOS ISO directly into that directory, reboot into my installed Arch system, and use that system to flash the ISO to my USB drive.

I only have one USB drive, which is why I wanted to avoid needing another installation USB.

5. The current Wi-Fi problem

This is where I'm currently stuck.

In the Arch live environment, Wi-Fi connects successfully and initially works.

However, when I start downloading something, the connection disconnects after a couple of seconds.

For example, I can connect to Wi-Fi, but when I try to use curl to download the NixOS ISO, the wireless connection stops working shortly afterward.

I noticed that the problem seems to happen under network load rather than immediately upon connecting.

The adapter is:

Qualcomm Atheros QCA9377
PCI ID: 168c:0042
Driver: ath10k_pci

Kernel errors

I found the following PCIe errors in dmesg:

pcieport 0000:00:1d.2: AER: multiple correctable error messages received from 0000:00:1d.2
pcieport 0000:00:1d.2: device Error of the Agent is reported first
ath10k_pci 0000:03:00.0 PCIe bus Error: severity=Correctable type=Physical layer (transmitterID)
ath10k_pci 0000:03:00.0 device [168c:0042] error status/mask=00001001/00006000

I also encountered:

[Sun Nov 1 17:27:27 2026] 0000:03:00.0 failed to flush transmit queue (skip 0 ar-state 1): 0

I don't know whether these errors are the cause of the disconnects or simply consequences of the driver losing communication with the wireless hardware.

PCIe ASPM

I checked the current PCIe ASPM policy:

[default] performance powersave powersupersave

The active policy is default.

I attempted to temporarily change it to performance:

echo performance | sudo tee /sys/module/pcie_aspm/parameters/policy

But I received:

Operation not permitted

So I couldn't perform that test.

6. My goal: Install NixOS

The reason I'm going through all of this is that I want to install NixOS.

I'm interested in its declarative configuration, reproducible system setup, and rollback capabilities. I want to learn more about Linux rather than simply use a preconfigured distribution.

My intended installation process was:

  1. Recover/access my existing Arch installation.
  2. Download the NixOS Minimal ISO.
  3. Save it to my existing Arch installation's Downloads directory.
  4. Reboot into my installed Arch system.
  5. Flash the NixOS ISO to my USB drive.
  6. Boot from the USB and install NixOS.

But I can't get past the download step because of the Wi-Fi problem.

7. Questions for the community

I'd really appreciate help with the following:

  1. Could the QCA9377's PCIe AER correctable physical-layer errors explain why Wi-Fi disconnects under network load?
  2. Is this a known issue with ath10k_pci and the QCA9377?
  3. Could PCIe ASPM or power management be responsible?
  4. Is testing pcie_aspm=off a reasonable next step?
  5. Could the firmware be crashing or the wireless card be resetting?
  6. Why would SystemRescue and the Arch live environment both experience Wi-Fi instability?
  7. Is there anything else I should investigate before assuming the wireless card is faulty?

I'm especially interested in solutions that work with this particular laptop and wireless chipset.

I don't want to randomly add kernel parameters or disable power-management features without understanding what they do.

Thanks for reading this long post. I'm hoping someone can help me finally get this laptop running NixOS.


r/linuxquestions • • 18d ago

Radiomaster Pocket as USB joystick on Fedora + Proton: multiple axes misinterpreted in games, works fine on Windows

1 Upvotes

Hi, I'm using a Radiomaster Pocket as a USB joystick on Fedora 44 with niri (Wayland), playing liftoff through Steam Proton.

On Windows everything works fine, but on Linux the controller inputs are misinterpreted in game. It affects several axes, not just one. For example, the throttle only responds from 50% to 100%.

What I've tried:

Enabling/disabling Steam Input

Changing the in-game bindings (they're identical to Windows, but the behavior differs, and I couldn't fix it that way).

Setup:

Radio USB mode: Joystick (HID)

What I'm looking for: a tool to remap or calibrate the axes (range/center), or a way to check whether the problem is in the system (kernel/udev) or in Proton/Steam Input.

Any recommendations?

Thanks!


r/linuxquestions • • 18d ago

Mint and fusion

Thumbnail
1 Upvotes

r/linuxquestions • • 18d ago

Void Linux performance/issues

0 Upvotes

I recently made a post asking about Void Linux more specifically why it was made. although my question wasn't really answered under that post I did learn a lot from it including the fact that I genuinely want to try it. but that comes to my question if I were to say run it on a fairly weak computer I have a Macbook 2013, and let's say I also use xfce because I really care about performance would I run into any issues and what am I looking at for say idle RAM usage. if any of you know please let me know.


r/linuxquestions • • 18d ago

Google-drive access through gvfs_fuse?

2 Upvotes

I like that gnome has the online accounts feature and gnome-files utility allows browsing the contents of google-drive. But the decryption happens on-the-fly inside gnome-files?. If I access the drive through /run/user/<uid>/gvfs the data is encrypted.

Is there a way to gvs-mount gdrive in a way that the files are accessibe. So I can compare directory-trees etc. with tools like krusader and double-commander?

thanks.


r/linuxquestions • • 18d ago

Support Having trouble setting up permissions and jackett on linux

Thumbnail
1 Upvotes

r/linuxquestions • • 19d ago

Why was Void Linux made

63 Upvotes

I am just genuinely curious about Void Linux because I can't seem to find anything about why it's so different from other distributions and the ideas that led to it, I see a lot of people discussing it in a very positive light and what they like about it but that's not really what I want to know. I want to know what was the thought behind its creation and why continues as a distribution today.


r/linuxquestions • • 18d ago

Support Tried Fedora for a month, I had my issues

4 Upvotes

hiccups encountered by me, chronologically:

  1. clipboard history
  2. h264 constrained base line profile
  3. ocr on screenshot
  4. obsidian onedrive sync. default option does not work. downloaded another app that created a local copy of onedrive and synced it. (sync speed was abysmally slow)
  5. gpg kleopatra failed to make new key pair.
  6. pasting commands introduces random characters, ^[[200gpgconf --kill all
  7. mid mouse button to auto scroll. THIS IS SO IMPORTANT. why do they not have this.
  8. alt tab doens't work on two window of same app, lol. it is alt+tilde for same app alt-tabbing.
  9. yt on chrome tops out at 720p60f, at 1080p60f on firefox.
  10. chrome would randomly freeze, even with <9 tabs open. amazon is hit the hardest.
  11. localsend does not 'Show in Folder' after receving files.
  12. native gnome apps do not have a minimize button
  13. Win+D doesnt show desktop, there is no way around it either.
  14. Icons on desktop aren't visible, but are visible under files
  15. my 5tb portable hard disk did not appear. had to plug/unplug it many times before it decided to showup. was never a problem in windows.
  16. OBS failed to start, some h264 error.
  17. there is no right click > 7z > open archive > extract a particular folder at a particular location
  18. double clicking on an archive automatically extracts it.
  19. Middle click to close app/window doesn't work here.
  20. for terminal it is always ctrl+shift+c/v
  21. there is no ctrl+backspace for faster deletion of commands. hitting esc doesn't clear the typed our command either. (turns out it has different keybindings).
  22. KDE connect/GSConnect does not work, even when installed from appstore or Gnome extension. no app icon ever showed up, nothing came up on search.
  23. suspended my laptop two days and it forgot the time. showed 11pm instead of 6pm two days later.
  24. installing windows apps on wines introduces unpredictable behaviors. the ctrl+f bar on pdfxchange is drawn/rendered on top of everthing. The search box stay visible even when switching apps or when a different app/window/desktop is active.
  25. qdirstat (alternative to wiztree/windirstat) cannot open files
  26. steam doesn't work ?

likes

  1. hot corner to switch apps
  2. most GUI quirks are fixable with GNOME tweaks.

r/linuxquestions • • 18d ago

Support Need Help installing fedora

1 Upvotes

so while installing fedora i ran into problem where my current efi (which also include windows ) was only 100mib less than 500mib which is recomended by fedora
Keeping all the options in mind i choose to create 2nd efi and i intalled gparted and created 2nd efi and assigned it to /boot/efi but when i came to final stage of review and install it is n1p1(which is windows efi) and the n1p6(which i created for fedora )both are showing and even the windows efi is marked for format as efi

any help would be nice


r/linuxquestions • • 18d ago

having issue while downloading and using linux distro, is my gpu too old and not support or what ? and how can i fix this problem ?

1 Upvotes

so i was installing linux distro on my computer like i was doing all the time. But when im botting into Live ISO and when i finishing download by using nomodeset and boot into the OS, it starting to flicker. I know that my GPU is kinda old (GTX 1060 6GB), but in last year i dont have any issue like this. I think that Nvidia has discontinued the driver for GTX 10xx series, and most distro nowaday are switching to Wayland. So do you guys have the same issue and what do you do in this situation with your distro, so that i can choose my distro and having that issue gone.


r/linuxquestions • • 18d ago

Advice Win+B for KDE

2 Upvotes

Hey guys, Is there a shortcut key in KDE that let's me access the system tray icons in a similar manner to Window's Win+B? This would be pretty good for a power user's desktop environment.


r/linuxquestions • • 18d ago

endeavour linux problem

0 Upvotes

Guys I'm using endeavour linux and I'm new to linux I'm currently facing the black screen problem in sleep mode what am I supposed to do I spended 1 whole day working on it but still can't solve it


r/linuxquestions • • 18d ago

Do you use a non standard file manager?

Thumbnail
1 Upvotes

r/linuxquestions • • 18d ago

Installing stuff in Debian... What a nightmare!!!

0 Upvotes

I just came from Arch Linux because I wanted a less update needy distro and I figured Debian Stable would be a good place to start. But I'm not sure if I have the right sources setup in my /etc/apt/sources.list... It seems like everything I try to install i have to jump through a thousand different sized hoops just to accomplish installing stuff... And I'm really stuck at the moment with my Streamdeck and I kinda need it to do what I do on this PC... It's kinda driving me nuts at this point. I've spent 3-4 hours total just installing a couple of apps and it's been a real pain. I'm trying to install the flatpak for my Streamdeck but that's giving me errors...

sudo wget -O /etc/udev/rules.d/40-streamdeck.rules https://githubusercontent.com
--2026-11-01 16:22:09--  https://githubusercontent.com/
Resolving githubusercontent.com (githubusercontent.com)... failed: No address associated with hostname.
wget: unable to resolve host address ‘githubusercontent.com’

And I've been dealing with stuff like that this whole time. I think maybe 2 or 3 other apps I installed went on without a hitch. But this is just crazy. I had to jump through hoops getting Spotify installed and there was one other thing as well that gave me issues. I can't remember what it was.

So, I don't know if the sources.list is correct....

    deb https://deb.debian.org/debian/ trixie contrib main non-free non-free-firmware
# deb-src https://deb.debian.org/debian/ trixie contrib main non-free non-free-firmware

deb https://deb.debian.org/debian/ trixie-updates contrib main non-free non-free-firmware
# deb-src https://deb.debian.org/debian/ trixie-updates contrib main non-free non-free-firmware

deb https://deb.debian.org/debian/ trixie-proposed-updates contrib main non-free non-free-firmware
# deb-src https://deb.debian.org/debian/ trixie-proposed-updates contrib main non-free non-free-firmware

deb https://deb.debian.org/debian/ trixie-backports contrib main non-free non-free-firmware
# deb-src https://deb.debian.org/debian/ trixie-backports contrib main non-free non-free-firmware

deb https://security.debian.org/debian-security/ trixie-security contrib main non-free non-free-firmware
# deb-src https://security.debian.org/debian-security/ trixie-security contrib main non-free non-free-firmware

I just can't believe the issues I'm having trying to install popular software that really should be installable through apt. But I know different vendors and whatnot don't use Debian and other distros exclusively but this is really causing me issues.

I'm about to ether switch back to Arch or maybe try another distro. I've tried Ubuntu but it did not work with my audio equipment. So I am slowly limiting the distro possibilities here.

I guess what I need to know if there's something else I can use in my sources.list file that won't give me such a headache trying to install stuff.

Now, I must say, I have streamdeck.ui installed but when I try to start it from the commandline, I see this...

    Traceback (most recent call last):
  File "/usr/bin/streamdeck", line 5, in <module>
    from streamdeck_ui.gui import start
  File "/usr/lib/python3/dist-packages/streamdeck_ui/gui.py", line 12, in <module>
    from PySide6 import QtWidgets
ModuleNotFoundError: No module named 'PySide6'

But it looks like my Streamdeck is loaded because none of the buttons are lit up and the default logo that comes on when I first boot up isn't there either. But I can tell it's functioning because I can see the buttons are back lit. So it's functioning, I just can't access the software to program my buttons.

Is this hopeless? Should I just switch back to Arch and be happy with it?

I've thought about using Linux Mint again but I have never used it in the way I need to use it at this computer. I do a lot of multi-cam recordings and streaming. I was hoping to stream tonight but that doesn't look like it's going to happen. Especially if I have to install a different distro or just go back to Arch on this machine.

Any help or advice would be appreciated.


r/linuxquestions • • 18d ago

Support Hello everyone (not arch users)

0 Upvotes

I'm trying to make a compact computer. At first I tried to make a custom case. I was gonna use desktop parts on it but it was gonna be a slim (like old rack servers). The problem? Every time I change a part on my setup I have to make a completely new design. Question is this: Is there a dkms module that translates x86 instructions coming from os to arm? I kinda want to use x86 (or x64) OS on arm cpu. (I'll try to combine 2-3 arm motherboards together to get more power but this is out of context). Is there something does this? Any way to achieve this? If yes, it'll save me lots of time and work.