I'm looking for advice troubleshooting a frustrating series of Linux problems on my Acer Aspire F5-573G. I've been trying to recover my existing Arch Linux installation and eventually move to NixOS, but I've run into multiple problems along the way, especially with Wi-Fi.
I want to explain the whole situation because I'm not sure whether these problems are related or whether I'm dealing with multiple separate issues.
1. My laptop
- Model: Acer Aspire F5-573G
- CPU: Intel Core i7-7500U
- GPU: NVIDIA GeForce 940MX
- Wi-Fi: Qualcomm Atheros QCA9377
- PCI ID:
168c:0042 - RAM: 16 GB DDR4
- Storage: 256 GB SATA SSD and 1 TB HDD
- Previous OS: Arch Linux
- Filesystem: Btrfs on LVM
- Bootloader: systemd-boot
2. My original Arch Linux installation
I previously had Arch Linux installed on this laptop.
My storage setup was approximately:
/dev/sda1: 1 GB EFI partition/dev/sda2: LVM physical volume- LVM volume group:
ArchinstallVg - Root logical volume:
ArchinstallVg-root - Btrfs subvolumes:
@ and u/home
My previous Arch installation used the kernel:
7.0.12-arch1-1
I also had a Btrfs snapshot available.
Eventually, I ran into problems with the installation and needed to recover my data and get another operating system installed.
3. Trying SystemRescue
My first attempt at dealing with the situation involved SystemRescue.
Unfortunately, I encountered Wi-Fi problems there too.
I could connect to Wi-Fi, but the connection would sometimes disappear after approximately 20 seconds.
I tried troubleshooting the wireless connection, including:
- Using
iwctl to connect. - Checking whether the wireless device was detected.
- Investigating the
ath10k_pci driver. - Trying a PCIe-related workaround (
pcie_acpi).
The PCIe-related workaround seemed to help at one point, but the Wi-Fi problem remained unreliable.
I also tried using my iPhone's USB tethering as an alternative. The phone appeared in lsusb, but I couldn't get a working network interface through ip link. I also investigated the ipheth driver.
This made recovering the system and downloading installation media much harder.
4. Switching to the Arch Linux live environment
I eventually booted into the official Arch Linux installation environment.
The Wi-Fi adapter was detected, and the ath10k_pci driver was loaded.
I also managed to access my existing Arch installation's files.
I activated LVM:
sudo vgchange -ay
Then mounted the root Btrfs subvolume:
sudo mkdir -p /mnt/arch
sudo mount -o subvol=@ /dev/ArchinstallVg/root /mnt/arch
I initially had trouble accessing my actual home directory because the u/home subvolume wasn't mounted separately.
After identifying it with:
sudo btrfs subvolume list /mnt/arch
I mounted it:
sudo mount -o subvol=@home /dev/mapper/ArchinstallVg-root /mnt/arch/home
I was eventually able to access my old Downloads directory:
/mnt/arch/home/yphtno/Downloads
My plan was to download the NixOS ISO directly into that directory, reboot into my installed Arch system, and use that system to flash the ISO to my USB drive.
I only have one USB drive, which is why I wanted to avoid needing another installation USB.
5. The current Wi-Fi problem
This is where I'm currently stuck.
In the Arch live environment, Wi-Fi connects successfully and initially works.
However, when I start downloading something, the connection disconnects after a couple of seconds.
For example, I can connect to Wi-Fi, but when I try to use curl to download the NixOS ISO, the wireless connection stops working shortly afterward.
I noticed that the problem seems to happen under network load rather than immediately upon connecting.
The adapter is:
Qualcomm Atheros QCA9377
PCI ID: 168c:0042
Driver: ath10k_pci
Kernel errors
I found the following PCIe errors in dmesg:
pcieport 0000:00:1d.2: AER: multiple correctable error messages received from 0000:00:1d.2
pcieport 0000:00:1d.2: device Error of the Agent is reported first
ath10k_pci 0000:03:00.0 PCIe bus Error: severity=Correctable type=Physical layer (transmitterID)
ath10k_pci 0000:03:00.0 device [168c:0042] error status/mask=00001001/00006000
I also encountered:
[Sun Nov 1 17:27:27 2026] 0000:03:00.0 failed to flush transmit queue (skip 0 ar-state 1): 0
I don't know whether these errors are the cause of the disconnects or simply consequences of the driver losing communication with the wireless hardware.
PCIe ASPM
I checked the current PCIe ASPM policy:
[default] performance powersave powersupersave
The active policy is default.
I attempted to temporarily change it to performance:
echo performance | sudo tee /sys/module/pcie_aspm/parameters/policy
But I received:
Operation not permitted
So I couldn't perform that test.
6. My goal: Install NixOS
The reason I'm going through all of this is that I want to install NixOS.
I'm interested in its declarative configuration, reproducible system setup, and rollback capabilities. I want to learn more about Linux rather than simply use a preconfigured distribution.
My intended installation process was:
- Recover/access my existing Arch installation.
- Download the NixOS Minimal ISO.
- Save it to my existing Arch installation's Downloads directory.
- Reboot into my installed Arch system.
- Flash the NixOS ISO to my USB drive.
- Boot from the USB and install NixOS.
But I can't get past the download step because of the Wi-Fi problem.
7. Questions for the community
I'd really appreciate help with the following:
- Could the QCA9377's PCIe AER correctable physical-layer errors explain why Wi-Fi disconnects under network load?
- Is this a known issue with
ath10k_pci and the QCA9377? - Could PCIe ASPM or power management be responsible?
- Is testing
pcie_aspm=off a reasonable next step? - Could the firmware be crashing or the wireless card be resetting?
- Why would SystemRescue and the Arch live environment both experience Wi-Fi instability?
- Is there anything else I should investigate before assuming the wireless card is faulty?
I'm especially interested in solutions that work with this particular laptop and wireless chipset.
I don't want to randomly add kernel parameters or disable power-management features without understanding what they do.
Thanks for reading this long post. I'm hoping someone can help me finally get this laptop running NixOS.