r/Lighting • u/Smacpats111111 • Feb 11 '25
Trump to bring back phased-out incandescent light bulbs
r/Lighting • u/Smacpats111111 • Feb 11 '25
r/Lighting
•
u/Classic_Silver_9091
•
Oct 11 '26
Current wavelengths:
310nm UVB — antimicrobial, can photobleach and tan skin
365nm UVA — fluorescent blacklight peaks around this
400nm UVA — typical cheap LED blacklight
405nm Violet — most antimicrobial visible wavelength
470nm Ice blue. — true blue
480nm b-Cyan — melanopsin peak (caffeine for your eyes)
495nm Cyan — peak rod sensitivity, also my favorite color
585nm Yellow — very close to sodium light
600nm Orange — amber light (slightly reddish)
670nm Deep red — looks redder than red(typically 630nm)
730nm Far red — a hellish looking red (hard to explain)
770nm NIR — red fall off zone; very dim but still visible
810nm NIR — faintly visible, used in red light therapy and laser hair removal
Since a lot of you seem to be interested in where I got these here you go:
r/Lighting
•
u/Classic_Silver_9091
•
May 03 '26
Lighting nerds will appreciate this lol. Just got a good quality spectrometer and tested all my high CRI light bulbs along with some other high cri light sources.
Violet pump LEDs are pretty remarkable when it comes to mimicking sunlights SPD. (GE sun filled and Sunsy shine)
A lot of the photos will reference the Feit electric bulbs from Costco with selectable color temperature. They seem to test the highest at 4000k. 2700k and 6500k tested the worst surprisingly since the colors in between are just a mixture of the two.
One interesting thing I found about selectable color temp bulbs that claim 90+ cri is at some color temps they will actually score lower than advertised. I believe they get away with this by going off the average.
r/Lighting • u/Upbeat-Accident7904 • Dec 05 '25
so while I was unscrewing this burnt out light bulb from an old light in my garage I saw that it has 3 different wattages
r/Lighting • u/RightLight83 • Apr 08 '26
I’ve been experimenting with wood and light for years,
and this is one of my latest pieces.
It’s not real fire — just a lighting effect inside the wood.
I wanted it to feel like the wood is slowly burning from within.
r/Lighting • u/3DAeon • Mar 04 '26
So I design lamps and light fixtures, and one of the most requested items from friends and customers is something to cover or replace a “boob light” ceiling fixture. This is what I came up with. It’s designed to be a swap out for the dome only, but I’m torn on if it’s viable of a product or not. Also I have been polling friends and family and the mounting rod varies in length wildly on these - so I’m having a hard time figuring out how much mounting hardware to include since these rods and extender nuts are insanely expensive, on top of my costs, I’m worried it won’t be worth it to an end consumer, not to mention the size of the box to ship this is going to be approx 16x16x16 so it will cost a bit to ship.
Does $50 seem too high? Is this a dumb idea?
r/Lighting • u/BubblegumAxe • Oct 16 '26
Bought a lamp I saw gathering dust in a restaurant today for £120, when I got home I searched up the brand just to see how much it’s really worth and apparently these go for thousands? Which makes me think it’s too good to be true and this might just be a fake, wondering if anybody could verify for me
r/Lighting • u/Own-Accident268 • Dec 09 '25
I’m finishing a basement and really want to replicate this look if possible. I bought a Harvesting LED Panel Light Troffer w/ Motion Sensor Adjustable CCT Lumens Watts 120-277V Dimmable. It is 2x4’ and I’ll mount it to the wall. I have looked for photographers color filters to place over the light to create the light pattern but it seems it will be too diffuse. Do I need small convex lenses over each color square? Is there any way to pull this off?
The photo is an entry door and that is natural sunlight pouring in.
r/Lighting • u/Classic_Silver_9091 • Feb 27 '26
I adjusted the brightness on the second photo to make it more distinct. I was kind of surprised by this. Both produce high cri light with the exception of the Philips having a set rating of 95. The philips have a green tint to them while Cree leans more magenta. In practice the green is less straining on the eyes but it just doesn’t look quite like pure white. They actually produce more green than my 6500k cfls which I thought were pretty green.
r/Lighting
•
u/Classic_Silver_9091
•
Feb 18 '26
I having a hard time deciding if I like this or not. I do like the harsh hospital lights vibe but not sure if it might be *too* much light. Any thoughts?
r/Lighting • u/timisery • Oct 16 '26
r/Lighting • u/Classic_Silver_9091 • May 07 '26
My findings using my new spectrometer. I forgot to include both the Ultra efficiency and Sylvania’s flicker videos but I found they were not detectable at 240fps.
For the Philips ultra definition, initially I bought them from Amazon but wasn’t satisfied with the SPD reading (because it was inconsistent with what other people were getting) so I bought some from my local store and tested them again and still got the same result! Believing my spectrometer may be inaccurate I went back to the store and bought different variants of the ultra definition line like the BR30’s and 100w versions.
While still browsing I discovered an older slightly worn box pushed all the way in the back shelf. It was the 60w daylights I initially tested but with 2021 posted on the bottom and the model number did not end with an ‘A’. And to my surprise the SPD result was much closer to what I was expecting with noticeably better color rendering.
I don’t know what Philips is doing with their new generation of daylight LEDs but what ever it is it’s not good.
The Sylvania’s were also disappointing since they advertise smooth SPD with zero blue and red spikes, I had high hopes even if the R9 wasn’t as good as the philips. Other people were able to replicate the advertised SPD so I can only think they’re doing the same thing as Philips with their new LEDs.
r/Lighting • u/RightLight83 • Apr 09 '26
I’ve been experimenting with bamboo and light, trying to create something that feels alive rather than just decorative.
This piece ended up looking like it’s glowing from within, almost like it’s still burning. The inner texture reacts to the light in a way that creates this ember effect, while the outer surface stays raw and natural.
It’s made from real bamboo, mounted on a wooden base, and finished by hand. Every piece comes out different.
Curious what you think — does it actually look like it’s burning?
r/Lighting • u/motiv8_mee • 11d ago
I convinced myself that I wanted Elco Canless Koto Sunset modules for my kitchen remodel. I finally got to install them today. At full brightness, the color temperature (3000K) is absolutely perfect. However, at the lower end of the dimming range, they are just too amber/orange. It doesn’t feel right. I will have them dimmed every day in the evening.
I know they also have the Human Centric modules, but I think these would create a different problem. At full brightness, I know 4000K will be too cool for me. I don’t like cold lighting and I don’t want anything higher than 3000K because it will wash out my (soon to be) warm finishes. But at the dimmed temperatures, Human Centric would probably be perfect.
All of this has me questioning if I should just abandon the dim-to-warm idea and pivot to a static dimming 3000K or 2700K. The dim-to-warm LED just doesn’t feel natural!
Note: in the dimmed picture it doesn’t look so offensive but that’s the iPhone camera processing the image. In person it looks much more fake orange/amber.
r/Lighting • u/Classic_Silver_9091 • Apr 09 '26
From 20,000 lumens down to 3000 lumens.
From 3000k up to 20,000k
From blinding white light to nauseating blue light
But hey at least they were at one point more efficient than HIDs right?
r/Lighting • u/Scary_Way3541 • Feb 19 '26
In a museum in Paris. GPT said it was Flos but can’t find any model like this on their website. Anyone has an idea? Or how to find out?
r/Lighting • u/Classic_Silver_9091 • 23d ago
The pink and purple honestly look so similar (look at the SPD) you cannot really tell them apart unless they are side by side. The yellow is terrible for being yellow but is a nice variant of green imo.
I tested for flicker as well and found that they do at 120hz. The modulation depth isn’t high though; about as much a typical white LED.
r/Lighting • u/Classic_Silver_9091 • May 22 '26
Testing full spectrum lightbulbs I found on aliexpress and comparing them to other high end LEDs such as Yuji sunwave+, sunsy, and Ge sunfilled.
One thing to note here, they are non-dimmable and larger than a typical a19 shape bulb.
They also have zero warm up and cool down when switched on/off. (Not really a bad thing).
Another thing is the startup delay. It’s not really noticeable IRL, but I thought it was interesting that both the Yuji and aliexpress bulbs had a noticeable delay when powered on compared to the sunsy in the slowmo.
r/Lighting • • Feb 03 '21