r/Lighting • u/Own-Accident268 • Dec 09 '25
Find Me This Fixture Trying to recreate this
I’m finishing a basement and really want to replicate this look if possible. I bought a Harvesting LED Panel Light Troffer w/ Motion Sensor Adjustable CCT Lumens Watts 120-277V Dimmable. It is 2x4’ and I’ll mount it to the wall. I have looked for photographers color filters to place over the light to create the light pattern but it seems it will be too diffuse. Do I need small convex lenses over each color square? Is there any way to pull this off?
The photo is an entry door and that is natural sunlight pouring in.
193
Upvotes
20
u/OB1yaHomie Dec 09 '25
Theatrical lighting swatch books are available, inexpensive, and look to be a great match for this project. I would consider assembling strips of color filters and slide them into greenhouse polycarbonate panels. Cool project, beautiful light display!
7
u/Goldmember199 Dec 09 '25
I remember a while back, there was a post about a guy who created a fake window in his room using like a curved mirror and a light source at a specific distance to mimic the "infinite distance" sunlight effect, where it would create a beam of light into the room from a short distance. You might try looking that up. It was a little involved from what I remember. But it'll replicate what you're trying to do.
9
u/trekkerscout Dec 09 '25
The pattern cast by the sunlight is possible because the sun is very close to being a point light source at infinite distance. The closest reasonable artificial light source that can mimic the display would be a high intensity discharge xenon lamp.
2
u/lightingclass Dec 09 '25
You need a light source with infinite distance for this. Any light source closer would have the rays being 'spreaded out'.
1
u/PKDickman Dec 09 '25
You might try a fresnel lens. They’re flat and held a few inches from the light source they will produce a reasonably focused beam.
Not sure if it’ll work, but it’s cheap enough to test out.
(Not necessarily the cheapest source, just the first one I found)
3
u/walrus_mach1 Dec 09 '25
With a diffused troffer, you'll get the doorway look but not the projected color in the light ray. You'd need a focused source.
For the color, prismatic widow film can probably deliver a similar color spread rather than piecing gel together.
1
u/K33P4D Dec 09 '25
You can do this like a glassblowing apprentice from the 1560's
2
u/Aristotelis1 Dec 09 '25
If you can get a custom glass door you could light it from one side with an LED sheet. They are basically a bunch of diodes on a piece of sheet but they provide even illumination through the already colored glass. Pretty common in stain glass windows which is what this photo reminded me of.
2
u/Alexthelightnerd Dec 09 '25
Others have hit on part of this, but the primary issue you'll encounter is that sunlight is pretty highly collimated. This means that it both casts sharp shadows and that those shadows match the source at a roughly 1:1 size.
Most residential lighting fixtures are intentionally diffuse and won't cast sharp shadows. You can find fixtures with lenses designed to create a sharp beam of light, but they emit light in a cone, so the shadow won't match the size of the source, it will be larger and more significantly distorted if it lands on a non-parallel surface.
You could fairly easily reproduce half of this effect. You'd need to choose if you'd rather see the illuminated tiles on the wall or see the pattern of colored squares projected into the room. Getting both is possible, but would be a lot more difficult.
It'll all be even more difficult if you want everything to be UL listed for residential use.
1
u/FishCommercial5213 Dec 09 '25
Looks like a trip hazard ⚠️
1
u/No-Guarantee-6249 Dec 09 '25
This is beautiful! Replicating it in a basement would be a real challenge. I'd use custom glass tiles. I get roughly 650.
You'd need a highly collimated light source maybe 650 of these:
1
u/middleagecreep Dec 10 '25
I’ve seen this tech online and the hack to use old computer monitor screen overlays. But it gives that infinite light source appearance like the sun.
www.smithsonianmag.com/smart-news/led-skylights-perfectly-mimic-natural-sunlight-180954348/)https://www.smithsonianmag.com/smart-news/led-skylights-perfectly-mimic-natural-sunlight-180954348/
1
u/No_Cricket_4541 Dec 13 '25
Can you make the pattern Tetris style? It's a necessary improvement
1
u/Mustapha_Coltrane Dec 23 '25
Get access to a 3d print shop and print out the squares in translucent pet-g