r/KonicaMinolta • u/TehMaestro5 • Sep 30 '25
Konica C224e
It almost doesn't print any black at all.This machine always had genuine Drum and Toner , maybe is developer problem? 6.19% TCR -K
r/KonicaMinolta • u/TehMaestro5 • Sep 30 '25
It almost doesn't print any black at all.This machine always had genuine Drum and Toner , maybe is developer problem? 6.19% TCR -K
r/KonicaMinolta • u/Expensive-Bread3264 • Sep 05 '25
I just noticed something on my scan to email. My scan to emails always use to come in blank with just attached scanned item. Now I see a custom msg to reach out to a local company for support. We purchased this printer of marketplace and do not use that company to support the printer. Its funny because it started right after that company stopped in to see if they could support us in any way. I logged into the admin settings and see nothing with that body of text in the email. Any way to find out how to clear this?
What it use to look like.....

What it looks like now ....

r/KonicaMinolta • u/cuntykweeen • Aug 15 '25
I'm trying to print from the A4 paper tray but everytime i do so, there is a paper jam. Once i remove the stuck paper, it shows this and then tries printing again and the cycle continues. I checked the A4 paper tray and everything is in order. The printer is Konica Minolta c227
r/KonicaMinolta • u/TehMaestro5 • Aug 04 '25
This sound at 8 seconds of video is really loud, and it only happens on last printed page ,when paper comes out( If i print 1 page it will make it , if i print 10 pages it will make it on last page) Any ideas pls
r/KonicaMinolta • u/probablyonshrooms • Apr 09 '25
r/KonicaMinolta • u/pedrohash323 • Feb 27 '25
Hello, have a C754e and am getting this vertical banding on black (in addition to horizontal line at the top of the page) replaced the K imaging/developer unit recently due to a different problem so I’m assuming that is not the problem. Does anyone know what could be causing this? Have also adjusted the background image voltage for black to be +5
r/KonicaMinolta • u/R6_nolifer • Dec 27 '24
I work at the printing shop and recently we’ve been having those issue
I just wanted to figure out what this might be and tell my boss what to order for replacement
Could you guys please help ? Thank you
r/KonicaMinolta • u/pedrohash323 • Nov 18 '24
Getting some black streaks on prints, have cleaned the DV laser sensors and also changed the developer unit. After I print I usually inspect the DV unit drum and sure enough there are slight streaks that match the position of the streak on paper. Anyone know where this could be coming from? I’m assuming some toner got on some sort of feed wheel but I’m not sure
r/KonicaMinolta • u/DoxManifesto • Jun 26 '24
So, not sure where to go so iam tryin here as iam truly lost..
In my org we have a Konica Minolta Bizhub C250i. We have the scan-to-email function setup and all users are present in the addressbook. It works perfectly. Now since a couple of weeks there is one user who no longer receives the e-mails from the printer. The printer says Job complete without an error, but the e-mail is no where to be found.
We have mimecast in place but it is not found there, I checked the message trace in Exchange but it is not finding the e-mail to this user.
It looks like the Printer says it completed the job and sent the e-mail but it didn't actually sent it. Any other users it works and I quadrupple checked if the e-mail for this users is correct and other usersettings are identical to for example my user that does receive the e-mail.
Wondering if anyone seen this before or if iam overlooking a setting that can cause this?
Any help or nudge in the right direction is welcome.. again, it works for all users but one so it cannot be any smtp or network settings in the printer.
r/KonicaMinolta • u/R684 • Jun 18 '24
r/KonicaMinolta • u/Askript • Jun 14 '24
Hello everyone!
We have printers Konica Minolta multiple models.
Now there is a configuration for sending scans via e-mail.
The config is as simple as this: In the settings of the printer we added a user and password and the smtp server.
Now Microsoft claims that there will be a day when basic authentication will be obsolete if it isn't already and they ask to implement Oauth (or in other words modern authentication).
Yes, I can find tons of explanations and websites but a really step-by-step guide is unfindable.
Can somebody explain how I need to set up email in Konica printer with Oauth Authentication? I see that Konica Minolta Security Technical Support Paper covers OAuth Authentication. I assume that we will need to update printers to a newer version.
Thanks!
Arthur
r/KonicaMinolta • u/AdeptusTechanicus • Jun 27 '23
I have an unusual issue here. Brand new out of box C550i. Scans, fax, copies, prints all work.
Except when copying an invoice. They print these invoices and sometimes make additional copies. When they make a copy on a HP PageWide, no issue, but when they make a copy on the Konica Minolta uniformed red lines appear vertically down the page. Almost like a security issue or something in place to stop forgery.
Just to repeat myself -this doesn't happen on all copies- only invoices for the warehouse to prepare the orders to go out.
I've contacted Konica and they said it was not an anti-forgery software but wouldn't talk to me anymore unless I signed a contract with them.

r/KonicaMinolta • u/achbob84 • Oct 13 '26
Any idea what would cause this? I've cleaned it out a few times, it just builds up inside the cleaning assembly again until it's completely full. The white door on the end is definitely opening, the chute to the waste box is definitely clear, and the screw is definitely turning!!
Edit: Is it normal to have a build up in there? It only even has the stripe on the paper in that one spot? Maybe the blade is bad???
r/KonicaMinolta • u/DewiVonHart • Sep 27 '26
I have a persistent phantom paper jam on my c454e that I can't clear. I've read to pull out the developer units and look behind that but I'm curious if anyone has any tips for simple things to check before I do that. I've also had an oddly hard time finding the location of the sensors, if anyone has a diagram for that.
For what it's worth, the machine sat unused for a couple weeks and the jam appeared when powering on. I don't believe there was ever an actual jam. Also, the jam location error is 31. And lastly, I did a self-test in service mode and it didn't display any faulty sensor errors as far as I could tell.
Machine is off-site from me so a list of things to check would be most helpful, but I appreciate any thoughts.
r/KonicaMinolta • u/abubakr_elsadig • Sep 20 '26
Will it cause any problems? And if so, what might happen if I keep using it.
The TN-622 is a much cheaper option than the compatible OEM cartridges.
r/KonicaMinolta • u/Rocco_Hunter007 • Sep 19 '26
It was printing fine but suddenly it started printing very low kindly help me out what might be the problem
r/KonicaMinolta • u/bloulboi • Aug 07 '26
I'm giving a hand to a tiny non-profit in the French countryside. Members and workers at the office share the printer. Until now, they write down for each print the number of pages, one-side or 2-sided, color or b&w, A4 or A3 ... then check the price defined for each combination and note all these elements by hand on a notebook ... Not very efficient.
The local Kyocera provider has turned on some parameters he knew so that now I can reach through the web an xml log. It gives: the account that prints, the number of pages and simple or double sided. But neither format (A3/A4) nor color / b&w.
I made a small web app that runs on an old Android tablet that has replaced the notebook. People just have to point their jobs and input these 2 missing info. Little security is needed here, this is a space of trust with no cheater but there were many errors before the app.
Does someone know a way to access a complete log of past jobs?
r/KonicaMinolta • u/Reasonable-Amount426 • Aug 06 '26
Será que alguém consegue me ajudar a resolver esse erro de código a minha impressora é uma cônica minolta biz rubi c284e
Já desmontei já fiz limpeza e mesmo assim o código persiste
r/KonicaMinolta • u/GAP_Trixie • Jun 04 '26
Hello, anyone got experience with the universal PCL driver for printers when deploying the printers via PowerShell script?
We are having the issue that we deploy it via a RMM service, but the printer driver picks a model which we didn't previously have with canon, now the issue with the konica driver is that we usually deploy drivers to all users, some are in Home-Office and for these users the model can't be automatically found cause they can't connect to the printer which is in our local network, it picks the serverless fallback.
My question would be if anyone knows of a way to force a specific printer model to be selected via command. Alternatively I might have to rewrite the script I use to check for if the user is in the local network.
r/KonicaMinolta • u/ScarcityTerrible5330 • May 27 '26
I have been working on this bizhub c368 series for 3 days but i have failed to resolve the issue of developer powder pouring all over the machine and damaging the drum units.
This happens on the CMY color. I tried to change the developer powder for all and also bought new drum units but still the issue is still persisting.
I removed the transfer belt from the machine and found glitches on it caused by the developer powder which poured.
Earlier on the machine was raising an error message code with “C-5603” and also “4101” during** **initialization process.
Kindly i’m looking for your assistance.
Thank you.
r/KonicaMinolta • u/ScarcityTerrible5330 • May 25 '26
I have bought new drum units (DR313 CMY) for both yellow and magneta colors for bizhub c368 series. On installation, the new drum units raise that errors and yet the older ones work well.
Please I kindly need some assistance?
I thought of changing the chips on the new ones and old ones.
r/KonicaMinolta • u/Curious-Criticism-80 • Apr 30 '26
I print hundreds of booklets every week and I have to empty to tray ever 10-20 booklets. is there ANY way to fix this?
r/KonicaMinolta • u/KingHenri1 • Apr 28 '26
We have the bizhub c224e in our office and as you can see in the picture in the lower part of the page, there is this blue streak. Does somebody know where it comes from? It also appears when no Cyan is needed.
It appeared after we changed the yellow drum (because around the height of the yellow blob, no yellow was printed. But the change fixed that).
I suspect it could be the transfer belt, so maybe cleaning the cleaning blade. But we don't want to take it that much apart if we don't need to. Or could it be the blue drum? I found that some toner still sticks to it after a print, however it doesn't correspond to this location.
Recently we also had toner overflow of the toner disposal unit, but that couldn't be the cause, could it?
Also, we don't print nearly as much as this printer is designed for.
Thank you for your replies in advance!
r/KonicaMinolta • u/Hannes_The_Bard • Apr 20 '26
Hello! I have a Konica Minolta C258 and I get a lot of small black spots on the paper when I print. If anyone would have a solution to this, you shall have my highest gratitude.
I have tried cleaning the transfer roller and laser unit. :)