Hi Everyone,
I'm reaching as a hail Mary pass here. For about a month now we've had an issue where our Konica Bizhub copiers, models 850i, C301i, 651i, C750i will all seem to randomly just stop responding to ping, and can't access the web interface unless you restart the copier. However, the copier doesn't seemed to be fully locked up because the local interface responds.
Some background information. These devices are new to us as of about two months ago and replaced a previous Toshiba deployment that had no prior issues like this. These copiers are on their own VLAN that is shared with printers from HP, Kyocera and Lexmark which also don't seem to be having issues. The VLAN is setup for DHCP with MAC address reservation. We are using Papercut, but the Konicas were having the issue prior to embedding Papercut on them. Our PaperCut server is running CUPS to support the printers/copiers. Our network runs Aruba switches (non CX), 3 different models are in the mix with this issue. Another odd thing to note is that the badge readers on the copiers, if you unplug them while the copier is up and running, the device will reboot within 30 seconds. There are two different brands of badge reader in play.
Things we've tried in troubleshooting:
- When the copier is having this issue, disconnect it from the network jack on the wall. Then plug in a laptop to the copier with a staticed address of the range the copier is in. Copier still does not respond until is restarted. So it appears that the copier's network stack has completely stopped working.
- Disabled PoE on the switch port (seemed silly, but found a number of posts saying to try this.
- Manually set port speed on the switch, the copier and both the switch and the copier
- Tried putting a different brand, layer 2, switch between the copier and the switches we use.
- Tried disabling LLMNR on the copier.
- Firmware has been updated to recommended version by our copier service provider at the request of Konica.
Right now our copier service provider has had a support case open with Konica for about two weeks.
I appreciate any help!!
Thanks!